Clinical and MRI-Based Assessment of Patients with Temporomandibular Disorders Treated by Controlled Mandibular Repositioning.

Background: Occlusal splints and anterior repositioning splints (ARSs) are widely accepted treatments for temporomandibular disorders (TMDs). However, there is uncertainty with regard to the most suitable amount of mandibular repositioning. The aim of this study is to evaluate the clinical and functional effects of the therapeutic position (ThP) established based on the Controlled Mandibular Repositioning (CMR) method.

The effect of bolus properties on muscle activation patterns and TMJ loading during unilateral chewing.

Mastication is a vital human function and uses an intricate coordination of muscle activation to break down food. Collection of detailed muscle activation patterns is complex and commonly only masseter and anterior temporalis muscle activation are recorded. Chewing is the orofacial task with the highest muscle forces, potentially leading to high temporomandibular joint (TMJ) loading.

Initial therapeutic approaches for orofacial myofascial pain: three pilot studies.

Objective: Myofascial pain diminishes the stomatognathic function and hinders clinical diagnosis. Therefore, initial pain reduction is crucial before definitive treatment. Here, the clinical validity of non-pharmaceutical therapies, including the Aqualizer® splint, physiotherapy, and dry-needle acupuncture was comparatively assessed.

Wear Management of Colored Foils for the Assessment of Sleep Bruxism Patterns-A Prospective, Randomized Crossover Study.

The assessment of bruxism relies on clinical examinations, questionnaires, and polysomnography. The additional use of colored foils (BruxChecker) could enable a more precise evaluation of bruxing patterns. To assess differences between use of the foils during stress periods or just on consecutive nights and to determine a reasonable duration of using the foils, 28 patients were classified according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) and were randomly assigned to wearing the 12 foils for six consecutive nights (alternately in the upper and lower jaw; "consecutive") or six nights within one month following days of high stress ("stress") in a crossover design.

The effect of tooth cusp morphology and grinding direction on TMJ loading during bruxism.

Increased mechanical loading of the temporomandibular joint (TMJ) is often connected with the onset and progression of temporomandibular joint disorders (TMD). The potential role of occlusal factors and sleep bruxism in the onset of TMD are a highly debated topic in literature, but ethical considerations limit examinations of this problem. The study aims to use an innovative modeling approach to thoroughly investigate the connection between morphological parameters, bruxing direction and TMJ stress.

Effect of facet inclination and location on TMJ loading during bruxism: An study.

Introduction: Functional impairment of the masticatory region can have significant consequences that range from a loss of quality of life to severe health issues. Increased temporomandibular joint loading is often connected with temporomandibular disorders, but the effect of morphological factors on joint loading is a heavily discussed topic. Due to the small size and complex structure of the masticatory region investigations of these connections are difficult to perform.

An in silico investigation of the effect of bolus properties on TMJ loading during mastication.

Mastication is the motor task with the highest muscle activations of the jaw region, potentially leading to high temporomandibular joint (TMJ) loading. Since increased loading of the TMJ is associated with temporomandibular disorders (TMD), TMJ mechanics during chewing has potential clinical relevance in TMD treatment. TMD self-management guidelines suggest eating soft and small pieces of food to reduce TMJ pain.

A Novel Quantitative Method for Tooth Grinding Surface Assessment Using 3D Scanning.

Sleep bruxism is an oral parafunction that involves involuntary tooth grinding and clenching. Splints with a colored layer that gets removed during tooth grinding are a common tool for the initial diagnosis of sleep bruxism. Currently, such splints are either assessed qualitatively or using 2D photographs, leading to a non-neglectable error due to the 3D nature of the dentition.

Is There an Association between Temporomandibular Disorders and Articular Eminence Inclination? A Systematic Review.

(1) Background: In order to determine the correlation between the inclination of articular eminence (AEI) and the development of temporomandibular disorders (TMDs), a systematic review was performed. (2) Methods: A systematic literature research was conducted between 1946 and January 2020, based on the following electronic databases: PubMed, Cochrane Library, Embase, Medline, Scope, SciELO, and Lilacs. Observational studies, analytical case-control studies, and cohort studies written in English were identified.

In vitro adherence of Candida albicans to zirconia surfaces.

Objectives: This study aimed to characterize surface properties such as roughness (Ra) and surface-free energy (SFE) of glazed and polished yttria-stabilized zirconia and to evaluate in vitro adherence of fungus Candida albicans and salivary bacteria, Staphylococcus epidermidis, mixed with C. albicans to these substrata. Additionally, the influence of salivary proteins (albumin, mucin and α-amylase) on yeast adhesion was studied.

Early diagnosis of degenerative changes in the articular/fibrocartilaginous disc of the temporomandibular joint in patients with temporomandibular disorders using delayed gadolinium-enhanced MRI at 3 Tesla - preliminary results.

Background: Delayed gadolinium enhanced MRI of cartilage (dGEMRIC) is a quantitative method for assessment of glycosaminoglycan content in connective tissues. We hypothesize that the early diagnosis of degenerative changes in the temporomandibular joint could be diagnosed using dGEMRIC technique.

Purpose: To test the compositional MRI technique, dGEMRIC, at 3 Tesla to diagnosis early the degenerative changes in the fibrocartilaginous disc of the temporomandibular joint (TMJ) in patients with temporomandibular disorders (TMD) and to compare the dGEMRIC index of patients to the healthy volunteers.

A Dynamic Jaw Model With a Finite-Element Temporomandibular Joint.

The masticatory region is an important human motion system that is essential for basic human tasks like mastication, speech or swallowing. An association between temporomandibular disorders (TMDs) and high temporomandibular joint (TMJ) stress has been suggested, but joint force measurements are not feasible to directly test this assumption. Consequently, biomechanical computer simulation remains as one of a few means to investigate this complex system.

In vivo prediction of temporomandibular joint disc thickness and position changes for different jaw positions.

Temporomandibular joint disorders (TMD) are common dysfunctions of the masticatory region and are often linked to dislocation or changes of the temporomandibular joint (TMJ) disc. Magnetic resonance imaging (MRI) is the gold standard for TMJ imaging but standard clinical sequences do not deliver a sufficient resolution and contrast for the creation of detailed meshes of the TMJ disc. Additionally, bony structures cannot be captured appropriately using standard MRI sequences due to their low signal intensity.

T2 mapping with 3.0 T MRI of the temporomandibular joint disc of patients with disc dislocation.

Introduction: T2 mapping, as a quantitative biochemical MRI-technique that provides information on water and collagen fiber content and composition, was shown to be clinically feasible for the evaluation of healthy temporomandibular joints.

Objectives: The aim of our study was to compare the T2 values of whole discs in patients with and without disc dislocation, to evaluate the possible influence of morphological findings on T2 values and to assess the interrater agreement.

Methods: Sixty-six patients were included in the study.

Investigation of the styloid process length in a Greek population.

Background: The styloid process (SP) is a slender cylindrical bony projection of the temporal bone with 2 ligaments and 3 muscles attached to it. Symptomatic SP elongation is also referred to, as Eagle's syndrome. The aim of the present study is to investigate the distribution of the SP length in a young adult Greek population.

Regional Collagen Fiber Network in the Articular Disc of the Human Temporomandibular Joint: Biochemical 3-Tesla Quantitative Magnetic Resonance Imaging Compared to Quantitative Histologic Analysis of Fiber Arrangement.

Aims: To evaluate the regional collagen fiber network in the human temporomandibular joint (TMJ) disc by using biochemical magnetic resonance imaging (MRI) and quantitative histology.

Methods: MRI of 5 heads (10 TMJ discs) obtained from partially dentate or edentulous cadavers was performed at 3-Tesla MRI by using a flexible, 8-channel transmit-receive coil. After MRI, all 10 discs were processed histologically.

Magnetic resonance imaging of temporomandibular joint with anterior disk dislocation without reposition - long-term results.

Objectives: Anterior disk dislocation (ADD) without reposition in the temporomandibular joint (TMJ) may be associated with morphological changes in the retrodiscal region of the bilaminar zone presenting as pseudo-disk (PD). The present study was initiated to investigate the development of retrodiscal fibrosis in a period of 4-8 years and to assess if patients with a PD show differences in the clinical and radiologic findings versus patients without a PD.

Materials And Methods: In a retrospective follow-up study of 33 consecutive patients with ADD without reposition in one or both TMJs, a clinical and MRI-supported evaluation was conducted 4 to 8 years after baseline diagnosis.

Immediately loaded distally cantilevered fixed mandibular prostheses supported by four implants placed in both in fresh extraction and healed sites: 2-year results from a prospective study.

Objectives: To evaluate the outcome of immediately loaded distally cantilevered mandibular full-arch prostheses according to the 'all-on-four' concept supported by implants placed in both fresh extraction and healed sites.

Material And Methods: A prospective study was conducted in 24 patients with extraction of all remaining mandibular teeth and placement of 4 implants per patient (2 mesial axial and 2 distal tilted) for full-arch mandibular restorations. Implants were inserted in fresh extraction sockets 2.

Biochemical analysis of the articular disc of the temporomandibular joint with magnetic resonance T2 mapping: a feasibility study.

Objectives: Symptoms of temporomandibular joint (TMJ) dysfunction can seriously compromise patients' quality of life. The aim of our study was to use magnetic resonance imaging (MRI) T2 mapping of the articular disc to determine whether T2 mapping of the TMJ disc is feasible in routine clinical imaging and to assess the normal T2 relaxation time distribution within the TMJ.

Methods: Included were ten asymptomatic volunteers without pain, any mouth-opening limitations, or any clicking phenomena.

Clinical outcome and peri-implant findings of four-implant-supported distal cantilevered fixed mandibular prostheses: five-year results.

Purpose: This retrospective study evaluated implant and prosthodontic survival/success rates of four-implant-supported distal cantilevered mandibular fixed prostheses over more than 5 years of clinical use.

Materials And Methods: Patients with mandibular edentulism treated with four-implant mandibular prostheses with distal extensions were evaluated. Cumulative implant survival/success rates, peri-implant conditions, and prosthodontic maintenance efforts were assessed.

Sex-specific differences in patients with temporomandibular disorders.

Aims: To explore potential differences in characteristics of patients that might account for sex-specific differences in temporomandibular disorders (TMD).

Methods: A total of 502 patients presenting with TMD during 2000 to 2002 at the Outpatient Unit for Functional Disorders of the Medical University of Vienna underwent detailed evaluation of their medical history and assessment of clinical findings. The data obtained were assessed for sex-specific differences by analysis of variance and multiple regression.

Patient preference and satisfaction with implant-supported mandibular overdentures retained with ball or locator attachments: a crossover clinical trial.

Purpose: To determine patient satisfaction and preference for implant-supported mandibular overdentures (IOD) retained with ball or Locator attachments. In addition, peri-implant conditions and prosthodontic maintenance efforts for the final attachments were evaluated after 1 year of function.

Material And Methods: In this crossover clinical trial, 20 edentulous patients were recruited to receive two mandibular implants in the canine region and were provided with implant-retained mandibular overdentures and new complete maxillary dentures.

Testing for aerobic heterotrophic bacteria allows no prediction of contamination with potentially pathogenic bacteria in the output water of dental chair units.

Background: Currently, to our knowledge, quality of output water of dental chair units is not covered by specific regulations in the European Union, and national recommendations are heterogeneous. In Germany, water used in dental chair units must follow drinking water quality. In the United States of America, testing for aerobic heterotrophic bacteria is recommended.

Implant-prosthodontic rehabilitation of anterior partial edentulism: a clinical review.

Purpose: The aim of this retrospective study was to evaluate implant survival/success rates and peri-implant parameters as well as patient satisfaction for uniformly designed implant-supported anterior maxillary or mandibular fixed partial dentures (FPDs).

Materials And Methods: A retrospective study was conducted on patients with maxillary or mandibular anterior partial edentulism (all incisors missing) treated between 2002 and 2006 with a two-implant-supported four-unit FPD. All FPDs were of the same design: two implant abutments in the lateral incisor positions and two ovate pontics in the central incisor positions.

Microleakage after thermocycling of cemented crowns--a meta-analysis.

Objectives: Microleakage testing of dental materials is a commonly accepted evaluation technique of margin integrity. Thermocycling has been utilized by many researchers to study the influence of temperature extremes on the marginal gap of cemented restorations. The aim of this investigation was to analyze microleakage data on cemented crowns, published in the dental literature until Dec 2009, to identify methodological factors that might potentially affect the results of in vitro microleakage tests and to compare the results.