Effect of Natural Inhibitors on the Corrosion Properties of Grade 2 Titanium Alloy.

This study investigates the effects of natural inhibitors (pomegranate, algae, and tomato extracts) on the corrosion resistance of titanium (grade 2). To deepen understanding the inhibition mechanism, Molecular Dynamic (MD) and Monte Carlo (MC) simulations were employed to analyze adsorption behaviors and identify optimal adsorption sites on titanium oxide (TiO) surfaces for compounds within the inhibitors. Results indicate non-flat adsorption orientations, with pomegranate peel extract components showing superior inhibition capabilities, attributed to the formation of strong O-H chemical bonds with the TiO surface.

The Effects of Dietary Orange Peel Fragments Enriched with Zinc and Vitamins C and E on the Antioxidant and Immune Responses of Nile Tilapia under Stress Conditions.

This study aimed to evaluate the effect of dietary orange peel fragments (OPFs) enriched with vitamins C (C) and E (E), as well as zinc (Zn) on the growth performance, hematological profile, immunological parameters, antioxidant capacity, and fillet lipid peroxidation of Nile tilapia subjected to heat/dissolved oxygen-induced stress (HDOIS), transport-induced stress (TIS), and infection (BC). A group of 500 male Nile tilapia (2.7 ± 0.

Effect of ultrasound on the physicochemical, mechanical and adhesive properties of micro-arc oxidized coatings on Ti13Nb13Zr bio-alloy.

Implant surgeries are increasingly challenging due to their rising number. Achieving the desired biomaterial surface properties to ensure a strong bond with human tissue is a significant issue. This study investigates the influence of ultrasound (US) during the micro-arc oxidation (MAO) process on Ti13Zr13Nb bio-alloy, an area not previously explored, to enhance titanium alloy coatings' properties for biomedical applications.

Paedodontic preformed crowns in primary teeth and relative degree of dental wear.

Aim: Prosthetic rehabilitation of deciduous teeth in paediatric age using pre-formed crowns has been considered one of the best methods of dental restoration since their introduction. Their main advantages are related to durability, longevity and a low rate of recurrent cavities. Since stainless steel crowns do not coincide with aesthetic needs of parents and patients, preformed paedodontic crowns made of zirconia and nano-hybrid composite was introduced.

Investigation of the Microstructural and Corrosion Properties of Steels and Light Alloys.

Very few metals can be found in metallic form in nature; the vast majority have to be processed from their ores at a great cost in terms of energy and money [...

Corrosion Resistance of GMAW Duplex Stainless Steels Welds.

The hydrocarbon industry constantly requires a better understanding of stainless-steel welding metallurgy. Despite the fact that gas metal arc welding (GMAW) is one of the most commonly employed welding processes in the petrochemical industry, the process is characterized by the presence of a high number of variables to control in order to obtain components that are dimensionally repeatable and satisfy the functional requirements. In particular, corrosion is still a phenomenon that highly affects the performance of the exposed materials, and special attention must be paid when welding is applied.

Phytase Supplementation under Commercially Intensive Rearing Conditions: Impacts on Nile Tilapia Growth Performance and Nutrient Digestibility.

This study evaluated the effects of phytase supplementation on growth performance and apparent digestibility of Nile tilapia () in a commercial fish farm setting. Nile tilapia (6300 male, 57.48 ± 1.

Effect of Cu Addition on the Corrosion and Antifouling Properties of PEO Coated Zinc-Aluminized Steel.

In the present work, Plasma Electrolytic Oxidation (PEO) coatings were produced on zinc-aluminized carbon steels (Galvalume commercial treatment). In addition, copper particles of various sizes were introduced into the coating in order to produce samples with antifouling properties. The particles were successfully embedded into the coating.

Advances in Duplex Stainless Steels.

Duplex stainless steels (DSSs) are a group of stainless steels characterized by a biphasic microstructure consisting of ferrite and austenite [...

Influence of silicon morphology on direct current plasma electrolytic oxidation process in AlSi10Mg alloy produced with laser powder bed fusion.

In this work, plasma electrolytic oxidation (PEO) process was applied on AlSi10Mg samples, produced with laser powder bed fusion (L-PBF), in the as printed condition and after different heat treatments, and, for comparison, on as-cast samples of AlSi10Mg. PEO process was performed in direct-current mode using high current densities and short time in a basic silicate electrolyte. For the first time, the effects of silicon morphology in L-PBF AlSi10Mg samples, in as printed condition and after different heat treatments, on the obtained PEO coating were investigated in terms of microstructure and corrosion properties.

Depth of Cure, Hardness, Roughness and Filler Dimension of Bulk-Fill Flowable, Conventional Flowable and High-Strength Universal Injectable Composites: An In Vitro Study.

(1) Objective: To evaluate and compare the depth of cure (DOC) of two bulk-fill flowable composites (Filtek Bulk Fill Flowable Restorative and Tetric EvoFlow Bulk Fill), two conventional flowable composites (Filtek Supreme XTE Flowable Restorative and G-ænial Flo X) and one high-strength universal injectable composite (G-ænial Universal Injectable). (2) Methods: specimens were placed in a stainless-steel mold with an orifice of 4 mm in diameter and 10 mm in depth and light-cured for 20 s using a light emitting diode (LED) light-curing unit (LCU) with an irradiance of 1000 mW/cm2; depth of cure was assessed using the ISO 4049 scrape technique, and the absolute length of the specimen of cured composite was measured in millimeters with a digital caliper. The same procedure was repeated with 14 samples for each material under investigation, for a total number of 70 test bodies.

Microstructural and Corrosion Properties of Hydroxyapatite Containing PEO Coating Produced on AZ31 Mg Alloy.

In this work, the composition of an electrolyte was selected and optimized to induce the formation of hydroxyapatite during Plasma electrolytic oxidation (PEO) treatment on an AZ31 alloy for application in bioabsorbable implants. In detail, the PEO process, called PEO-BIO (Plasma Electrolytic Oxidation-Biocompatible), was performed using a silicate-phosphate-based electrolyte with the addition of calcium oxide in direct-current mode using high current densities and short treatment times. For comparison, a known PEO process for producing anticorrosive coatings, called standard, was applied on the same alloy.

Effect of Different Austempering Heat Treatments on Corrosion Properties of High Silicon Steel.

A novel high silicon austempered (AHS) steel has been studied in this work. The effect of different austenitizing temperatures, in full austenitic and biphasic regime, on the final microstructure was investigated. Specimens were austenitized at 780 °C, 830 °C, 850 °C and 900 °C for 30 min and held isothermally at 350 °C for 30 min.

Influence of Electropulsing Treatments on Mechanical Properties of UNS S32750 Duplex Stainless Steel.

Prestrained at 5% and 15% duplex stainless steel UNS S32750 specimens have been subjected to electropulsing treatments with current density of 100 A/mm and 200 A/mm and 100 and 500 pulses for each current density value. Corrosion tests, X-ray diffraction, microhardness and residual stresses were collected before and after the electropulsing treatments. Tensile tests were performed after the electropulsing treatments in order to compare the mechanical response to reference tensile tests performed before pulsing treatments.

Investigation of Electroplastic Effect on Four Grades of Duplex Stainless Steels.

Since the late 1950s, an effect of electrical current in addition to joule heating on the deformation of metals called the Electroplastic Effect (EPE) has been known. It is used nowadays in the so-called Electrically Assisted Forming (EAF) processes, but the understanding of the phenomenon is not very clear yet. It has been found that EPE increases the formability of high stacking fault energy (SFE) materials, while low SFE materials reach fracture prematurely.

Identification of Zinc Absorption Biomarkers in Muscle Tissue of Nile Tilapia Fed with Organic and Inorganic Sources of Zinc Using Metallomics Analysis.

The development of metallomics techniques has allowed for metallomics analysis of biological systems, enabling a better understanding of the response mechanisms for different stimuli, their relationship to metallic species, and the characterization of biomarkers. In this study, a metallomics analysis of the muscle tissue of Nile tilapia was used to aid the understanding of the molecular mechanisms involved in zinc absorption in this fish species when fed organic and/or inorganic sources of zinc and to identify possible biomarkers for the absorption of this micromineral. To accomplish this, the fish were separated into three groups of 24 g, 74 g, and 85 g initial weights, and each group, respectively, was fed a zinc-free diet (control group, G1), a diet containing zinc found in organic sources (treatment 1, G2), and a diet containing zinc from an inorganic source (treatment 2, G3).

Effect of grinding and polishing on the roughness and fracture resistance of cemented CAD-CAM monolithic materials submitted to mechanical aging.

Statement Of Problem: The effect of clinical adjustments on the strength of cemented computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic materials under aging challenge is unclear.

Purpose: The purpose of this in vitro study was to assess the surface roughness and fracture resistance (with or without mechanical aging) of cemented CAD-CAM monolithic materials submitted to grinding and polishing procedures.

Material And Methods: Disks of Lava Ultimate, Vita Enamic, crystallized Vita Suprinity, and IPS e.

Inadequate Dietary Phosphorus Levels Cause Skeletal Anomalies and Alter Osteocalcin Gene Expression in Zebrafish.

Phosphorus (P) is an essential mineral for the development and maintenance of the vertebrate skeletal system. Modulation of P levels is believed to influence metabolism and the physiological responses of gene expression. In this study, we investigated the influence of dietary P on skeletal deformities and osteocalcin gene expression in zebrafish (), and sought to determine appropriate levels in a diet.

BiOCl/(BiO)CO Nanocomposite Materials for Pollutant Adsorption and Degradation: Modulation of the Functional Properties by Composition Tailoring.

BiOCl/(BiO)CO nanocomposite materials were studied as bifunctional systems for depuration of wastewater. They are able to efficiently adsorb and decompose rhodamine B (RhB) and methyl orange (MO), used as model pollutants. BiOCl/(BiO)CO nanocomposites were synthesized at room temperature and ambient pressure by means of controlled hydrolysis of BiCl in the presence of a surfactant (Brij 76).

Activity of Brazilian propolis against Aeromonas hydrophila and its effect on Nile tilapia growth, hematological and non-specific immune response under bacterial infection.

The effect of the ethanolic extract of propolis (EEP) on Aeromonas hydrophila was analyzed by determination of minimum inhibitory concentration (MIC). Then, the effects of crude propolis powder (CPP) on growth, hemato-immune parameters of the Nile tilapia, as well as its effects on resistance to A. hydrophila challenge were investigated.

Antibacterial effect of PEO coating with silver on AA7075.

In this work, plasma electrolytic oxidation (PEO) coatings were produced on AA7075 using alkaline solution containing silicates compounds and silver micrometric particles in order to give to the coating an antimicrobial effect. In the optic of circular economy, silver chloride derived from the acid pre-treatment of electronic scraps was used as raw material and successively silver powders were synthesized from silver chloride solution using glucose syrup as reducing agent. The coatings were characterized by scanning electron microscope (SEM), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), potentiodynamic polarization test and antimicrobial tests.

Non-specific immune parameters and physiological response of Nile tilapia fed β-glucan and vitamin C for different periods and submitted to stress and bacterial challenge.

This study attempts to describe the effects of different administration periods of dietary β-glucan and Vit C on the non-specific immune response, physiological parameters and disease resistance of Nile tilapia against Aeromonas hydrophila infection. Therefore, a feeding trial (288 fish) was conducted to determine the best administration period (7, 15, 30 and 45 days) for a Nile tilapia diet supplemented with 0.1% β-glucan and 600 mg Vit C/kg diet.

[The production of micro-policies in the work process in oral health: a socio-analytical approach].

Oral health care has been gradually consolidated into the Brazilian public health system, though different know-how and practices in the oral health area continue to coexist in the institutions involved, creating an environment of constant dispute. The scope of this paper is to discuss the meanings and effects brought about by an institutional proposal evaluated by a group of professionals in the city of Campinas, State of São Paulo, Brazil, involved in primary oral health care. Based on their everyday work, these professionals evaluated the care they provide and sought to adapt it better to the real needs of the service users and to make it more accessible.

Determination of chromium by GFAAS in slurries of fish feces to estimate the apparent digestibility of nutrients in feed used in pisciculture.

This paper presents a simple, fast and sensitive method to determine chromic oxide (used as a biological marker of fish feed) in samples of fish feces by GFAAS through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The standard samples of feces and of fish feed containing 0.10-1.