Real-time monitoring of bead-based DNA hybridization in a microfluidic system: study of amplicon hybridization behavior on solid supports.

DNA hybridization phenomena occurring on solid supports are not understood as clearly as aqueous phase hybridizations and mathematical models cannot predict some empirically obtained results. Ongoing research has identified important parameters but remains incomplete to accurately account for all interactions. It has previously been shown that the length of the overhanging (dangling) end of the target DNA strand following hybridization to the capture probe is correlated to interactions with the complementary strand in solution which can result in unbinding of the target and its release from the surface.

Detection of unamplified target genes via CRISPR-Cas9 immobilized on a graphene field-effect transistor.

Most methods for the detection of nucleic acids require many reagents and expensive and bulky instrumentation. Here, we report the development and testing of a graphene-based field-effect transistor that uses clustered regularly interspaced short palindromic repeats (CRISPR) technology to enable the digital detection of a target sequence within intact genomic material. Termed CRISPR-Chip, the biosensor uses the gene-targeting capacity of catalytically deactivated CRISPR-associated protein 9 (Cas9) complexed with a specific single-guide RNA and immobilized on the transistor to yield a label-free nucleic-acid-testing device whose output signal can be measured with a simple handheld reader.

Structured oligonucleotides for target indexing to allow single-vessel PCR amplification and solid support microarray hybridization.

The combination of molecular diagnostic technologies is increasingly used to overcome limitations on sensitivity, specificity or multiplexing capabilities, and provide efficient lab-on-chip devices. Two such techniques, PCR amplification and microarray hybridization are used serially to take advantage of the high sensitivity and specificity of the former combined with high multiplexing capacities of the latter. These methods are usually performed in different buffers and reaction chambers.

From cellular lysis to microarray detection, an integrated thermoplastic elastomer (TPE) point of care Lab on a Disc.

We present an all-thermoplastic integrated sample-to-answer centrifugal microfluidic Lab-on-Disc system (LoD) for nucleic acid analysis. The proposed CD system and engineered platform were employed for analysis of Bacillus atrophaeus subsp. globigii spores.

Amplification strategy using aggregates of ferrocene-containing cationic polythiophene for sensitive and specific electrochemical detection of DNA.

We report a new electrochemical amplification strategy for an ultrasensitive electrochemical detection of DNA sequences using aggregates composed of a water-soluble, ferrocene-functionalized polythiophene. A two-step hybridization is performed at one addressing surface with PNA capture probes whereas the electrochemical detection is done on an electrode nearby. Specific and quantitative detection of DNA targets with a detection limit of 4 × 10(-16) M (about 4 zeptomoles or about 2500 copies of oligonucleotides) was achieved.

A multiplexed immunoassay system based upon reciprocating centrifugal microfluidics.

A novel, centrifugal disk-based micro-total analysis system (μTAS) for low cost and high throughput semi-automated immunoassay processing was developed. A key innovation in the disposable immunoassay disk design is in a fluidic structure that enables very efficient micro-mixing based on a reciprocating mechanism in which centrifugal acceleration acting upon a liquid element first generates and stores pneumatic energy that is then released by a reduction of the centrifugal acceleration, resulting in a reversal of direction of flow of the liquid. Through an alternating sequence of high and low centrifugal acceleration, the system reciprocates the flow of liquid within the disk to maximize incubation/hybridization efficiency between antibodies and antigen macromolecules during the incubation/hybridization stage of the assay.

Validation of a centrifugal microfluidic sample lysis and homogenization platform for nucleic acid extraction with clinical samples.

The applications of microfluidic technologies in medical diagnostics continue to increase, particularly in the field of nucleic acid diagnostics. While much attention has been focused on the development of nucleic acid amplification and detection platforms, sample preparation is often taken for granted or ignored all together. Specifically, little or no consideration is paid to the development of microfluidic systems that efficiently extract nucleic acids from biological samples.

Vancomycin-modified nanoparticles for efficient targeting and preconcentration of Gram-positive and Gram-negative bacteria.

A series of vancomycin-modified nanoparticles were developed and employed in magnetic confinement assays to isolate a variety of Gram-positive and Gram-negative bacteria from aqueous solution. We determined that the orientation/architecture of vancomycin on the surface of the nanoparticles and the overall surface coverage is critical in mediating fast and effective interactions between the nanoparticle and the pathogen cell wall surface and only one orientation/architecture in a series of modified nanoparticles leads to the efficient and reproducible capture of several important pathogenic bacteria. Interestingly, as the nanoparticles increase in diameter (from approximately 50 to 2800 nm), it is necessary to incorporate a long linker between the nanoparticle surface and the vancomycin moiety in order for the surface bound probe to efficiently confine Gram-positive bacteria.

Internal control for nucleic acid testing based on the use of purified Bacillus atrophaeus subsp. globigii spores.

Commonly used internal controls (ICs) to monitor the efficiency of nucleic acid testing (NAT) assays do not allow verification of nucleic acid extraction efficiency. Since microbial cells are often difficult to lyse, it is important to ensure that nucleic acids are efficiently extracted from any target organism. For this purpose, we developed a cellular IC based on the use of nonpathogenic Bacillus spores.

Plastic polymers for efficient DNA microarray hybridization: application to microbiological diagnostics.

Fabrication of microarray devices using traditional glass slides is not easily adaptable to integration into microfluidic systems. There is thus a need for the development of polymeric materials showing a high hybridization signal-to-background ratio, enabling sensitive detection of microbial pathogens. We have developed such plastic supports suitable for highly sensitive DNA microarray hybridizations.

Specific magnetic bead based capture of genomic DNA from clinical samples: application to the detection of group B streptococci in vaginal/anal swabs.

Background: Group B streptococci (GBS) are a leading cause of sepsis and meningitis in newborns. We previously developed a rapid diagnostic system for GBS detection from vaginal/anal samples obtained from pregnant women during delivery. To facilitate the adaptation of this method for point-of-care testing, we have developed a specific and efficient GBS DNA capture method that is compatible with both PCR and nonamplification detection technologies.

Surface modification of thermoplastics--towards the plastic biochip for high throughput screening devices.

Microarrays have become one of the most convenient tools for high throughput screening, supporting major advances in genomics and proteomics. Other important applications can be found in medical diagnostics, detection of biothreats, drug discovery, etc. Integration of microarrays with microfluidic devices can be highly advantageous in terms of portability, shorter analysis time and lower consumption of expensive biological analytes.

A low-cost, disposable card for rapid polymerase chain reaction.

A low-cost, disposable card for rapid polymerase chain reaction (PCR) was developed in this work. Commercially available, adhesive-coated aluminum foils and polypropylene films were laminated with structured polycarbonate films to form microreactors in a card format. Ice valves [1] were employed to seal the reaction chambers during thermal cycling and a Peltier-based thermal cycler was configured for rapid thermal cycling and ice valve actuation.

Microfluidic device for rapid (<15 min) automated microarray hybridization.

Background: Current hybridization protocols on microarrays are slow and need skilled personnel. Microfluidics is an emerging science that enables the processing of minute volumes of liquids to perform chemical, biochemical, or enzymatic analyzes. The merging of microfluidics and microarray technologies constitutes an elegant solution that will automate and speed up microarray hybridization.

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid.

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products.

Detection of target DNA using fluorescent cationic polymer and peptide nucleic acid probes on solid support.

Background: Nucleic acids detection using microarrays requires labelling of target nucleic acids with fluorophores or other reporter molecules prior to hybridization.

Results: Using surface-bound peptide nucleic acids (PNA) probes and soluble fluorescent cationic polythiophenes, we show a simple and sensitive electrostatic approach to detect and identify unlabelled target nucleic acid on microarray.

Conclusion: This simple methodology opens exciting possibilities for applied genetic analysis for the diagnosis of infections, identification of genetic mutations, and forensic inquiries.

Modulation of gene expression in Leishmania drug resistant mutants as determined by targeted DNA microarrays.

In the protozoan parasite Leishmania, drug resistance can be a complex phenomenon. Several metabolic pathways and membrane transporters are implicated in the resistance phenotype. To monitor the expression of these genes, we generated custom DNA microarrays with PCR fragments corresponding to 44 genes involved with drug resistance.

A naturally occurring sequence variation that creates a YY1 element is associated with increased cystic fibrosis transmembrane conductance regulator gene expression.

We have identified previously a novel complex mutant allele in the cystic fibrosis transmembrane conductance regulator (CFTR) gene in a patient affected with cystic fibrosis (CF). This allele contained a mutation in CFTR exon 11 known to cause CF (S549R(T>G)), associated with the first alteration described so far in the minimal CFTR promoter region (-102T>A). Studies on genotype-phenotype correlations revealed striking differences between patients carrying mutation (S549R(T>G)) alone, who had a severe disease, and patients carrying the complex allele (-102(T>A)+S549R(T>G)), who exhibited milder forms of CF.

Enhancement of adenovirus-mediated gene delivery by use of an oligopeptide with dual binding specificity.

The efficiency of human adenovirus serotype 5 (Ad5) transgene delivery was tested on several human and animal cell lines in vitro, by using a bimodular 35-mer oligopeptide carrying two peptide domains with different ligand specificities. One domain mimicked the fiber knob-binding region of the alpha2 domain of human MHC-1 molecules (MH20), and the other corresponded to the gastrin-releasing peptide (GRP). Two synthetic peptides with different configurations were analyzed in Ad-mediated gene transfer assays using Ad5Luc3 vector carrying the luciferase reporter gene.

HEED, the product of the human homolog of the murine eed gene, binds to the matrix protein of HIV-1.

heed, the human homolog of mouse eed and Drosophila esc, two members of the trithorax (trx) and Polycomb group (Pc-G) of genes, was isolated by screening an activated lymphocyte cDNA library versus the immunodeficiency virus type 1 (HIV-1) MA protein used as a bait in a two-hybrid system in yeast. The human EED protein (HEED) had 99. 5% identity with the mouse EED protein and contained seven WD repeats.