Publications by authors named "Petropoulos P"

Compact power splitters are essential components in integrated optics. While 1 × 2 power splitters with uniform splitting are widely used, a 1 × splitter with arbitrary number of ports and arbitrary splitting ratio is yet to be demonstrated. In this work we address this problem.

View Article and Find Full Text PDF

We design and fabricate a sub-wavelength on-chip mode splitter based on the implementation of a shifted junction between a single-mode waveguide and a multimode waveguide. A proper choice of the device parameters enables to split the input beam into a combination of different guided modes of the multimode waveguide, minimizing radiation and reflection losses that amount to ∼ 0.4 dB in our experiments.

View Article and Find Full Text PDF

We present wavelength-division multiplexed coherent transmission in an O-band amplified link enabled by bismuth-doped fiber amplifiers (BDFAs). Transmission of 4 × 25 GBd DP-16QAM (4 × 200 Gb/s) is demonstrated over a single span of 50-km length, occupying a bandwidth of 4.7 THz across the wavelengths 1323 nm to 1351 nm.

View Article and Find Full Text PDF

This work aims to promote and improve Public Health practices by creating an Information System (IS) to register health inspections performed in health stores by the Public Health Inspectors of the Health Departments of Regions in Greece. The IS was implemented based on open-source programming languages and frameworks. The front end was implemented by JavaScript and Vue.

View Article and Find Full Text PDF

We implemented a bismuth-doped fiber amplifier (BDFA) based optical recirculating loop to investigate the performance of amplified O-band transmission over appreciable distances. Both single-wavelength and wavelength-division multiplexed (WDM) transmission were studied, with a variety of direct-detection modulation formats. We report on (a) transmission over lengths of up to 550 km in a single-channel 50-Gb/s system operating at wavelengths ranging from 1325 nm to 1350 nm, and (b) rate-reach products up to 57.

View Article and Find Full Text PDF

Optical fibers have unwanted residual birefringence due to imperfections in fabrication processes and environmental conditions. This birefringence will randomize the state of polarization of propagating signals and may harm the performance of four-wave mixing based processing devices. Here, we present a quantitative study of the effects of birefringence in orthogonal-pump four-wave mixing systems, and identify different regions of operation of the optical fiber, mainly determined by the relative magnitude between the physical length L and beat length L.

View Article and Find Full Text PDF

We report on what is to the best of our knowledge the longest 50-Gb/s/λ O-band wavelength-division multiplexed (WDM) transmission. A pair of in-house built bismuth-doped fiber amplifiers (BDFAs) and the use of Kramers-Kronig detection-assisted single-sideband transmission are adopted to overcome the fiber loss and chromatic dispersion, respectively, in a reach-extended O-band coarse WDM (CWDM) system with a channel spacing of ∼10 nm. Through experiments on an amplified 4×50-Gb/s/λ direct-detection system based on booster and pre-amp BDFAs, we show the superior performance of single-sideband transmission in terms of both optical signal-to-noise ratio sensitivity and uniformity in performance amongst CWDM channels relative to double-sideband transmission after both 75-km and 100-km lengths of single-mode fiber.

View Article and Find Full Text PDF

We propose and numerically demonstrate a versatile strategy that allows designing highly efficient dual-level grating couplers in different silicon nitride-based photonic platforms. The proposed technique, which can generally be applied to an arbitrary silicon nitride film thickness, is based on the simultaneous optimization of two grating coupler levels to obtain high directionality and grating-fibre mode matching at the same time. This is achieved thanks to the use of two different linear apodizations, with opposite signs, applied to the two grating levels, whose design parameters are determined by using a particle swarm optimization method.

View Article and Find Full Text PDF

In this work, we show the design of a silicon photonic-based polarization converting device based on the integration of semiconduction InP nanowires on the silicon photonic platform. We present a comprehensive numerical analysis showing that full polarization conversion (from quasi-TE modes to quasi-TM modes, and vice versa) can be achieved in devices exhibiting small footprints (total device lengths below 20 µm) with minimal power loss (<2 dB). The approach described in this work can pave the way to the realization of complex and re-configurable photonic processors based on the manipulation of the state of polarization of guided light beams.

View Article and Find Full Text PDF

In this review we present some of the recent advances in the field of silicon nitride photonic integrated circuits. The review focuses on the material deposition techniques currently available, illustrating the capabilities of each technique. The review then expands on the functionalisation of the platform to achieve nonlinear processing, optical modulation, nonvolatile optical memories and integration with III-V materials to obtain lasing or gain capabilities.

View Article and Find Full Text PDF

Beam tracking-and-steering is crucial for the operation of high-speed, narrow beam, optical wireless communication (OWC) systems. Using a system based on two sets of low-cost cameras for continuous beam tracking and a set of mirrors for steering, we demonstrate here a high-capacity (>1Tbit/s) ten-channel wavelength-division multiplexed (WDM) OWC system based on discrete multitone transmission. The results, which are achieved over a 3.

View Article and Find Full Text PDF

The recent emergence of efficient O-band amplification technologies has enabled the consideration of O-band transmission beyond short reach. Despite the O-band being a low chromatic dispersion (CD) window, the impact of CD will become increasingly significant when extending the reach of direct-detection (DD) systems. In this work, we first numerically investigate the 3-dB bandwidth of single-mode fibers (SMF) and the CD-restricted transmission reach in intensity-modulation DD systems, confirming the significant difference between low- and high-dispersion O-band wavelengths.

View Article and Find Full Text PDF

The recent emergence of bismuth-doped fiber amplifiers (BDFAs) offers the potential to transmit high-speed WDM signals over long distances in the O-band spectral region, thereby greatly enhancing the scope of systems utilizing these wavelengths. In this paper, we present a comprehensive experimental study on several basic characteristics of an O-band BDFA based on a phosphosilicate optical fiber, including the frequency-dependent noise figure, gain tilt (static and dynamic), transient response, and polarization dependent gain. We discuss our findings and their implications on the use of BDFA technology in high bit-rate multichannel systems.

View Article and Find Full Text PDF

The novel COVID-19 global pandemic has raised, among many others, major concerns regarding the impact of infection during pregnancy. Current evidence suggests that vertical transmission from mother to baby, antenatally or intrapartum, does occur, but is uncommon. According to the published reports of infants born to COVID-19-affected mothers, as well as the anecdotal experience of current practices worldwide, it appears that investigations regarding the potential of SARS-COV-2 vertical transmission in pregnancy have so far been based, to a large extent, on PCR testing of neonatal pharyngeal swab samples.

View Article and Find Full Text PDF

We characterize the spectral broadening performance in silica clad and unclad Tantalum pentoxide (TaO) waveguides as a function of the input pulse central wavelength and polarization, sweeping over a wavelength range from 900 nm to 1500 nm, with an average incident power of 110 mW. The waveguides are 0.7 µm high and between 2.

View Article and Find Full Text PDF

This paper presents the design and implementation of a fully differential optical receiver, which is aimed for short reach intensity modulation and direct detection (IMDD) transceiver links. A Si-Ge balanced photodetector (PD) has been co-designed and packaged with a novel differential transimpedance amplifier (TIA). The TIA design is realized with a standard 28 nm CMOS process and operates with a standard digital supply (1V).

View Article and Find Full Text PDF

We experimentally demonstrate a means to selectively enhance wavelength conversion of WDM channels on a 100 GHz grid exploiting nonlinear effects between the spatial modes of a few mode fiber. The selectivity of parametric gain is obtained by dispersion design of the fiber such that the inverse group velocity curves of the participating modes are parallel and their dispersion is suitably large. We describe both theoretically and experimentally the observed dependence of the idler gain profile on pump mode (quasi) degeneracy.

View Article and Find Full Text PDF

We show that subwavelength Si-rich nitride waveguides efficiently sustain high-speed transmissions at 2 μm. We report the transmission of a 10 Gbit/s signal over 3.5 cm with negligible power penalty.

View Article and Find Full Text PDF

We report on the generation of an optical comb of highly uniform in power frequency lines (variation less than 0.7 dB) using a silicon ring resonator modulator. A characterization involving the measurement of the complex transfer function of the ring is presented and five frequency tones with a 10-GHz spacing are produced using a dual-frequency electrical input at 10 and 20 GHz.

View Article and Find Full Text PDF

Recently, coherent control of the optical response of thin films in standing waves has attracted considerable attention, ranging from applications in excitation-selective spectroscopy and nonlinear optics to all-optical image processing. Here, we show that integration of metamaterial and optical fibre technologies allows the use of coherently controlled absorption in a fully fiberized and packaged switching metadevice. With this metadevice, which controls light with light in a nanoscale plasmonic metamaterial film on an optical fibre tip, we provide proof-of-principle demonstrations of logical functions XOR, NOT and AND that are performed within a coherent fibre network at wavelengths between 1530 and 1565 nm.

View Article and Find Full Text PDF

We present the characterization of a silicon Mach-Zehnder modulator with electrical packaging and show that it exhibits a large third-order intermodulation spurious-free dynamic range (> 100 dB Hz). This characteristic renders the modulator particularly suitable for the generation of high spectral efficiency discrete multi-tone signals and we experimentally demonstrate a single-channel, direct detection transmission system operating at 49.6 Gb/s, exhibiting a baseband spectral efficiency of 5 b/s/Hz.

View Article and Find Full Text PDF

We present a simple and practical strategy that allows to design high-efficiency grating couplers. The technique is based on the simultaneous apodization of two structural parameters: the grating period and the fill-factor, along with the optimization of the grating coupler etching depth. Considering a 260 nm Si-thick Silicon-on-insulator platform, we numerically demonstrated a coupling efficiency of -0.

View Article and Find Full Text PDF

We have designed and fabricated a silicon photonic in-phase-quadrature (IQ) modulator based on a nested dual-drive Mach-Zehnder structure incorporating electrical packaging. We have assessed its use for generating Nyquist-shaped single sideband (SSB) signals by operating it either as an IQ Mach-Zehnder modulator (IQ-MZM) or using just a single branch of the dual-drive Mach-Zehnder modulator (DD-MZM). The impact of electrical packaging on the modulator bandwidth is also analyzed.

View Article and Find Full Text PDF

We report a nonlinear signal processing system based on a SiGe waveguide suitable for high spectral efficiency data signals. Four-wave-mixing (FWM)-based wavelength conversion of 10-Gbaud 16-Quadrature amplitude modulated (QAM) and 64-QAM signals is demonstrated with less than -10-dB conversion efficiency (CE), 36-dB idler optical signal-to-noise ratio (OSNR), negligible bit error ratio (BER) penalty and a 3-dB conversion bandwidth exceeding 30nm. The SiGe device was CW-pumped and operated in a passive scheme without giving rise to any two-photon absorption (TPA) effects.

View Article and Find Full Text PDF

We demonstrate all-optical regeneration of both the phase and the amplitude of a 10 GBaud quadrature phase shift keying (QPSK) signal using two nonlinear stages. First we regenerate the phase using a wavelength converting phase sensitive amplifier and then we regenerate the amplitude using a saturated single-pump parametric amplifier, returning the signal to its original wavelength at the same time. We exploit the conjugating nature of the two processing stages to eliminate the intrinsic SPM distortion of the system, further improving performance.

View Article and Find Full Text PDF