Can we detect Li K X-ray in lithium compounds using energy dispersive spectroscopy?

Lithium is the key element for the development of battery and new technology and the development of an analytical technique to spatially and quantitatively resolve this element is of key importance. Detection of Li K in pure metallic lithium is now possible in the Scanning Electron Microscope (SEM) with newly designed Energy Dispersive Spectroscopy (EDS). However, this work is clearly showing, for the first time using EDS, the detection of Li K in several binary lithium compounds (LiH, Li N, Li S, LiF and LiCl).

Development and application of a microfluidic in-situ analyzer for dissolved Fe and Mn in natural waters.

The redox sensitive trace metals iron and manganese are two important elements that help shape the biogeochemistry of aquatic systems and thus their measurement is important. Current laboratory methods are expensive, time consuming and cannot provide the spatial and temporal resolution needed to characterize these elements in natural waters. Here we describe the first autonomous analyzer capable of providing vertical profiles as well as routine in-situ determinations of dissolved Fe(II) and Mn in aquatic environments.

Ice sheets as a significant source of highly reactive nanoparticulate iron to the oceans.

The Greenland and Antarctic Ice Sheets cover ~ 10% of global land surface, but are rarely considered as active components of the global iron cycle. The ocean waters around both ice sheets harbour highly productive coastal ecosystems, many of which are iron limited. Measurements of iron concentrations in subglacial runoff from a large Greenland Ice Sheet catchment reveal the potential for globally significant export of labile iron fractions to the near-coastal euphotic zone.

Lab-on-chip measurement of nitrate and nitrite for in situ analysis of natural waters.

Microfluidic technology permits the miniaturization of chemical analytical methods that are traditionally undertaken using benchtop equipment in the laboratory environment. When applied to environmental monitoring, these "lab-on-chip" systems could allow high-performance chemical analysis methods to be performed in situ over distributed sensor networks with large numbers of measurement nodes. Here we present the first of a new generation of microfluidic chemical analysis systems with sufficient analytical performance and robustness for deployment in natural waters.

Nutrients in estuaries--an overview and the potential impacts of climate change.

The fate and cycling of macronutrients introduced into estuaries depend upon a range of interlinked processes. Hydrodynamics and morphology in combination with freshwater inflow control the freshwater flushing time, and the timescale for biogeochemical processes to operate that include microbial activity, particle-dissolved phase interactions, and benthic exchanges. In some systems atmospheric inputs and exchanges with coastal waters can also be important.

A new methodology for precise cadmium isotope analyses of seawater.

Previous studies have revealed considerable Cd isotope fractionations in seawater, which can be used to study the marine cycling of this micronutrient element. The low Cd concentrations that are commonly encountered in nutrient-depleted surface seawater, however, pose a particular challenge for precise Cd stable isotope analyses. In this study, we have developed a new procedure for Cd isotope analyses of seawater, which is suitable for samples as large as 20 L and Cd concentrations as low as 1 pmol/L.

Interferences in the analysis of nanomolar concentrations of nitrate and phosphate in oceanic waters.

This paper reports on investigations into interferences with the measurements of nanomolar nitrate+nitrite and soluble reactive phosphate (SRP) in oceanic surface seawater using a segmented continuous flow autoanalyser (SCFA) interfaced with a liquid-waveguide capillary flow-cell (LWCC). The interferences of silicate and arsenate with the analysis of SRP, the effect of sample filtration on the measurement of nanomolar nitrate+nitrite and SRP concentrations, and the stability of samples during storage are described. The investigation into the effect of arsenate (concentrations up to 100 nM) on phosphate analysis (concentrations up to 50 nM) indicated that the arsenate interference scaled linearly with phosphate concentrations, resulting in an overestimation of SRP concentrations of 4.

Southern Ocean deep-water carbon export enhanced by natural iron fertilization.

The addition of iron to high-nutrient, low-chlorophyll regions induces phytoplankton blooms that take up carbon. Carbon export from the surface layer and, in particular, the ability of the ocean and sediments to sequester carbon for many years remains, however, poorly quantified. Here we report data from the CROZEX experiment in the Southern Ocean, which was conducted to test the hypothesis that the observed north-south gradient in phytoplankton concentrations in the vicinity of the Crozet Islands is induced by natural iron fertilization that results in enhanced organic carbon flux to the deep ocean.

The determination of the efficiency of energy dispersive X-ray spectrometers by a new reference material.

A calibration procedure for the detection efficiency of energy dispersive X-ray spectrometers (EDS) used in combination with scanning electron microscopy (SEM) for standardless electron probe microanalysis (EPMA) is presented. The procedure is based on the comparison of X-ray spectra from a reference material (RM) measured with the EDS to be calibrated and a reference EDS. The RM is certified by the line intensities in the X-ray spectrum recorded with a reference EDS and by its composition.

Improved X-ray Spectrum Simulation for Electron Microprobe Analysis.

The accurate calculation of characteristic peak intensity is essential for interpreting X-ray spectra in electron microprobe analysis. Conventionally, the measured intensity from a standard of known composition is used as a reference to simplify the calculation. However, if no such standard is available, then all factors influencing X-ray generation and X-ray detection efficiency must be included.

Limitations to Accuracy in Extracting Characteristic Line Intensities From X-Ray Spectra.

The early development of quantitative electron probe microanalysis, first using crystal spectrometers, then energy dispersive x-ray spectrometers (EDXS), demonstrated that elements could be detected at 0.001 mass fraction level and major concentrations measured within 2 % relative uncertainty. However, during this period of extensive investigation and evaluation, EDXS detectors were not able to detect x rays below 1 keV and all quantitative analysis was performed using a set of reference standards measured on the instrument.