Reconstructing Historical Exposures to Respirable Dust and Respirable Silica in the Taconite Mining Industry for 1955-2010.

The goal of this study was to reconstruct the historical respirable silica (RS) and respirable dust (RD) exposures of workers in the Minnesota taconite industry from 1955 to 2010 as part of several epidemiological studies for assessing the association between exposure to components of taconite dusts and the development of respiratory diseases. A job-exposure matrix (JEM) was developed that uses 9127 RS and 19 391 RD occupational hygiene historical measurements. Historical RS and RD data were extracted from several sources and were grouped into seven mines and then into eight departments [Concentrating, Crushing, Janitor, Mining, Office/control room, Pelletizing, Shop (mobile), and Shop (stationary)].

Comparison of samplers collecting airborne influenza viruses: 1. Primarily impingers and cyclones.

Researchers must be able to measure concentrations, sizes, and infectivity of virus-containing particles in animal agriculture facilities to know how far infectious virus-containing particles may travel through air, where they may deposit in the human or animal respiratory tract, and the most effective ways to limit exposures to them. The objective of this study was to evaluate a variety of impinger and cyclone aerosol or bioaerosol samplers to determine approaches most suitable for detecting and measuring concentrations of virus-containing particles in air. Six impinger/cyclone air samplers, a filter-based sampler, and a cascade impactor were used in separate tests to collect artificially generated aerosols of MS2 bacteriophage and swine and avian influenza viruses.

Perception of Impact of Frequent Short Training as an Enhancement of Annual Refresher Training.

Introduction of facilitated hands-on drills as often as monthly and the use of online modules prior to annual refresher training for emergency response teams were investigated through surveys and group discussions. This research explores how these drills are perceived by emergency response team members, emergency response team coordinators, instructors, and management at the company. Using these tools throughout the year, members of emergency response teams from automobile manufacturing facilities reported an increased ability to maintain their skill sets, build teamwork, and continually refresh and strengthen their ability to protect their fellow workers as well as plant operations and equipment.

Ambient Fine Aerosol Concentrations in Multiple Metrics in Taconite Mining Operations.

Studies in environmental epidemiology and of occupational cohorts have implicated the effects of fine particulates with increased risk of cardiovascular diseases. Motivated by this evidence, we conducted an ambient air monitoring campaign to characterize fine aerosol concentrations around various taconite ore processes in six taconite mines in northeastern Minnesota. The ore processes were first categorized into 16 broad work areas/buildings.

Effects of Gestation Pens Versus Stalls and Wet Versus Dry Feed on Air Contaminants in Swine Production.

Objective: Evolving production practices in the swine industry may alter the working environment. This research characterized the influence of stall versus pen gestation housing and wet versus dry feed in finishing on air contaminant concentrations.

Methods: Eight-hour time-weighted ammonia, hydrogen sulfide, respirable dust, respirable endotoxin, and carbon dioxide concentrations and temperature were measured regularly at stationary locations throughout a year in a facility with parallel gestation stall and open pen housing and parallel finishing rooms using dry and wet feed delivery systems.

Effects of Spray Surfactant and Particle Charge on Respirable Coal Dust Capture.

Background: Surfactant-containing water sprays are commonly used in coal mines to collect dust. This study investigates the dust collection performance of different surfactant types for a range of coal dust particle sizes and charges.

Methods: Bituminous coal dust aerosol was generated in a wind tunnel.

Compressed air noise reductions from using advanced air gun nozzles in research and development environments.

The aims of this study were to evaluate sound levels produced by compressed air guns in research and development (R&D) environments, replace conventional air gun models with advanced noise-reducing air nozzles, and measure changes in sound levels to assess the effectiveness of the advanced nozzles as engineering controls for noise. Ten different R&D manufacturing areas that used compressed air guns were identified and included in the study. A-weighted sound level and Z-weighted octave band measurements were taken simultaneously using a single instrument.

A comprehensive assessment of exposures to respirable dust and silica in the taconite mining industry.

This study assessed the present-day levels (year 2010-2011) of exposure to respirable dust (RD) and respirable silica (RS) in taconite mines and evaluated how the mining process influences exposure concentrations. Personal samples (n = 679) were collected to assess exposure levels of workers to RD and RS at six mines in the Mesabi Iron Range of Minnesota. The RD and RS concentrations were measured using the National Institute for Occupational Safety and Health (NIOSH) 0600 and NIOSH 7500, respectively.

Assessment of air sampling methods and size distribution of virus-laden aerosols in outbreaks in swine and poultry farms.

Swine and poultry viruses, such as porcine reproductive and respiratory syndrome virus (PRRSV), porcine epidemic diarrhea virus (PEDV), and highly pathogenic avian influenza virus (HPAIV), are economically important pathogens that can spread via aerosols. The reliability of methods for quantifying particle-associated viruses as well as the size distribution of aerosolized particles bearing these viruses under field conditions are not well documented. We compared the performance of 2 size-differentiating air samplers in disease outbreaks that occurred in swine and poultry facilities.

Evaluation of an electrostatic particle ionization technology for decreasing airborne pathogens in pigs.

Influenza A virus (IAV), porcine reproductive and respiratory syndrome virus (PRRSV), porcine epidemic diarrhea virus (PEDV) and are important swine pathogens capable of being transmitted via aerosols. The electrostatic particle ionization system (EPI) consists of a conductive line that emits negative ions that charge particles electrically resulting in the settling of airborne particles onto surfaces and potentially decreasing the risk of pathogen dissemination. The objectives of this study were to determine the effect of the EPI system on the quantity and viability of IAV, PRRSV, PEDV and in experimentally generated aerosols and in aerosols generated by infected animals.

Investigation into the Airborne Dissemination of H5N2 Highly Pathogenic Avian Influenza Virus During the 2015 Spring Outbreaks in the Midwestern United States.

We investigated the plausibility of aerosol transmission of H5N2 highly pathogenic avian influenza (HPAI) virus during the 2015 spring outbreaks that occurred in the U.S. midwest.

Concentration, Size Distribution, and Infectivity of Airborne Particles Carrying Swine Viruses.

When pathogens become airborne, they travel associated with particles of different size and composition. Particle size determines the distance across which pathogens can be transported, as well as the site of deposition and the survivability of the pathogen. Despite the importance of this information, the size distribution of particles bearing viruses emitted by infectious animals remains unknown.

Personal Protective Equipment Use and Handwashing Among Animal Farmers: A Multi-site Assessment.

The goal of this study was to compare and contrast the use of personal protective equipment (PPE) and the practice of handwashing among participants of four studies assessing poultry and swine farms in the midwestern United States and in Thailand. This largely descriptive exercise was designed to assess and compare the frequency of these protective practices among the study populations. There were a total of 1113 surveys analyzed across the four studies.

Survival of airborne MS2 bacteriophage generated from human saliva, artificial saliva, and cell culture medium.

Laboratory studies of virus aerosols have been criticized for generating airborne viruses from artificial nebulizer suspensions (e.g., cell culture media), which do not mimic the natural release of viruses (e.

The relationship between various exposure metrics for elongate mineral particles (EMP) in the taconite mining and processing industry.

Different dimensions of elongate mineral particles (EMP) have been proposed as being relevant to respiratory health end-points such as mesothelioma and lung cancer. In this article, a methodology for converting personal EMP exposures measured using the National Institute for Occupational Safety and Health (NIOSH) 7400/7402 methods to exposures based on other size-based definitions has been proposed and illustrated. Area monitoring for EMP in the taconite mines in Minnesota's Mesabi Iron Range was conducted using a Micro Orifice Uniform Deposit Impactor (MOUDI) size-fractionating sampler.

Factors influencing the airborne capture of respirable charged particles by surfactants in water sprays.

This research measured the effects of particle diameter, surfactant-containing spray solution, and particle charge on the capture of respirable particles by surfactant-containing water spray droplets. Polystyrene latex particles with diameters of 0.6, 1.

Comprehensive assessment of exposures to elongate mineral particles in the taconite mining industry.

Since the 1970s, concerns have been raised about elevated rates of mesothelioma in the vicinity of the taconite mines in the Mesabi Iron Range. However, insufficient quantitative exposure data have hampered investigations of the relationship between cumulative exposures to elongate mineral particles (EMP) in taconite dust and adverse health effects. Specifically, no research on exposure to taconite dust, which includes EMP, has been conducted since 1990.

Comparative emissions of random orbital sanding between conventional and self-generated vacuum systems.

Conventional abrasive sanding generates high concentrations of particles. Depending on the substrate being abraded and exposure duration, overexposure to the particles can cause negative health effects ranging from respiratory irritation to cancer. The goal of this study was to understand the differences in particle emissions between a conventional random orbital sanding system and a self-generated vacuum random orbital sanding system with attached particle filtration bag.

Assessing potential nanoparticle release during nanocomposite shredding using direct-reading instruments.

This study was conducted to determine if engineered nanoparticles are released into the air when nanocomposite parts are shredded for recycling. Test plaques made from polypropylene resin reinforced with either montmorillonite nanoclay or talc and from the same resin with no reinforcing material were shredded by a granulator inside a test apparatus. As the plaques were shredded, an ultrafine condensation particle counter; a diffusion charger; a photometer; an electrical mobility analyzer; and an optical particle counter measured number, lung-deposited surface area, and mass concentrations and size distributions by number in real-time.

Detection of viruses in used ventilation filters from two large public buildings.

Background: Viral and bacterial pathogens may be present in the air after being released from infected individuals and animals. Filters are installed in the heating, ventilation, and air-conditioning (HVAC) systems of buildings to protect ventilation equipment and maintain healthy indoor air quality. These filters process enormous volumes of air.

Comparing exposure zones by different exposure metrics using statistical parameters: contrast and precision.

Recently, the appropriateness of using the 'mass concentration' metric for ultrafine particles has been questioned and surface area (SA) or number concentration metrics has been proposed as alternatives. To assess the abilities of various exposure metrics to distinguish between different exposure zones in workplaces with nanoparticle aerosols, exposure concentrations were measured in preassigned 'high-' and 'low-'exposure zones in a restaurant, an aluminum die-casting factory, and a diesel engine laboratory using SA, number, and mass concentration metrics. Predetermined exposure classifications were compared by each metric using statistical parameters and concentration ratios that were calculated from the different exposure concentrations.

Airborne diazinon concentrations during and after outdoor spray application.

Airborne concentrations of the organophosphate pesticide diazinon were assessed using personal sampling on an applicator and area sampling at several locations within ornamental plant beds sprayed with the chemical. As part of field work testing a prototype pesticide monitor, diazinon was applied to azalea bushes, from a backpack sprayer, on two separate occasions. Personal and area sampling was used to measure concentrations during the application and over multiple time scales after the initial sampling.

Determination of particle concentration rankings by spatial mapping of particle surface area, number, and mass concentrations in a restaurant and a die casting plant.

Measurements using several exposure metrics were carried out in a restaurant and a die casting plant to compare the spatial distributions of particle surface area (SA), number, and mass concentrations and rank exposures in different areas by those metrics. The different exposure metrics for incidental nanoparticle and fine particle exposures were compared using the concentration rankings, statistical differences between areas, and concentration ratios between different areas. In the die casting plant, area concentration rankings and spatial distributions differed by the exposure metrics chosen.

Experimental evaluation of oil mists using a semivolatile aerosol dichotomous sampler.

The sampling performance of the semivolatile aerosol dichotomous sampler (SADS) was tested and compared with existing vapor and particle sampling methods: filtration, electrostatic precipitation, and vapor adsorption. Seven different test fluids were used to generate test droplets, and their concentrations and composition in each phase were evaluated using gas chromatography. The amount of wall loss inside the SADS was also evaluated.