Development and evaluation of RADA-PDGF2 self-assembling peptide hydrogel for enhanced skin wound healing.

Wound healing complications affect numerous patients each year, creating significant economic and medical challenges. Currently, available methods are not fully effective in the treatment of chronic or complicated wounds; thus, new methods are constantly sought. Our previous studies showed that a peptide designated as PDGF2 derived from PDGF-BB could be a promising drug candidate for wound treatment and that RADA16-I can serve as a release system for bioactive peptides in wound healing.

SARS-CoV-2 Virus-like Particles with Plasmonic Au Cores and S1-Spike Protein Coronas.

The COVID-19 pandemic has stimulated the scientific world to intensify virus-related studies aimed at the development of quick and safe ways of detecting viruses in the human body, studying the virus-antibody and virus-cell interactions, and designing nanocarriers for targeted antiviral therapies. However, research on dangerous viruses can only be performed in certified laboratories that follow strict safety procedures. Thus, developing deactivated virus constructs or safe-to-use virus-like objects, which imitate real viruses and allow performing virus-related studies in any research laboratory, constitutes an important scientific challenge.

Release systems based on self-assembling RADA16-I hydrogels with a signal sequence which improves wound healing processes.

Self-assembling peptides can be used for the regeneration of severely damaged skin. They can act as scaffolds for skin cells and as a reservoir of active compounds, to accelerate scarless wound healing. To overcome repeated administration of peptides which accelerate healing, we report development of three new peptide biomaterials based on the RADA16-I hydrogel functionalized with a sequence (AAPV) cleaved by human neutrophil elastase and short biologically active peptide motifs, namely GHK, KGHK and RDKVYR.

Nanocellulose-Based Polymer Composites Functionalized with New Gemini Ionic Liquids.

The manuscript discusses the application of dimeric imidazolium ionic liquids with an aliphatic linker of different lengths, constituting a new class of compounds called gemini, for the modification of renewable materials. This innovative functionalization with the use of ionic liquids made it possible to obtain polymer composite nanomaterials with renewable fillers, which will reduce the consumption of petroleum-based raw materials and also be directly related to the reduction of energy intensity. Renewable filler in the form of nanocellulose modified with ionic liquids, as well as polymer composites with such filler obtained by extrusion and injection molding techniques, were subjected to detailed characterization using techniques like: X-ray diffraction (XRD), Fourier transform spectroscopy (FTIR), dispersion studies (DLS), morphological analysis (SEM), differential scanning calorimetry (DSC), hot-stage polarized light microscopy and characterization of mechanical properties.

Starch-Silane Structure and Its Influence on the Hydrophobic Properties of Paper.

Starch is an inexpensive, easily accessible, and widespread natural polymer. Due to its properties and availability, this polysaccharide is an attractive precursor for sustainable products. Considering its exploitation in adhesives and coatings, the major drawback of starch is its high affinity towards water.

Nanocellulose Production Using Ionic Liquids with Enzymatic Pretreatment.

Nanocellulose has gained increasing attention during the past decade, which is related to its unique properties and wide application. In this paper, nanocellulose samples were produced via hydrolysis with ionic liquids (1-ethyl-3-methylimidazole acetate (EmimOAc) and 1-allyl-3-methylimidazolium chloride (AmimCl)) from microcrystalline celluloses (Avicel and Whatman) subjected to enzymatic pretreatment. The obtained material was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), and thermogravimetric analysis (TG).

Novel nanosystems to enhance biological activity of hydroxyapatite against dental caries.

This work aimed to study for the first time to our knowledge the influence of the structure of the dental flosses (DF) coated by hydroxyapatite nanoparticles (HAP NPs) on the biological performance of saliva probiotic bacteria (S. salivarius), and human dermal and osteoblast-like cells. We used three types of HAP@DF composites (based on two unwaxed dental flosses - "fluffy" and "smooth", and one waxed "smooth") with different morphologies.

Synthesis, characterization and in vitro cytotoxicity studies of poly-N-isopropyl acrylamide gel nanoparticles and films.

In this work, we show synthesis that leads to thermoreponsive poly-N-isopropyl acrylamide (pNIPAM) nanogels with sizes below 100 nm, irrespectively of the surfactant to crosslinker ratio. We also show that in many environments the temperature induced pNIPAM collapse at Lower Critical Solution Temperature (LCST) of 32.5 °C is accompanied by gel nanoparticles' aggregation.

Influence of Chemical Pre-Treatments and Ultrasonication on the Dimensions and Appearance of Cellulose Fibers.

Due to the wider use of nanocellulose in various areas of economic life, better and more optimal methods of obtaining nanocellulose are constantly being sought. Therefore, an attempt was made to evaluate the hybrid cellulose treatment, based on the use of a chemical method combined with an ultrasound of medium frequency. The study employs two different starting materials (Södra Black R cellulose or microcrystalline cellulose), two types of chemical pre-treatments (acid hydrolysis or oxidation), and two sonication durations.

Unique cellular network formation guided by heterostructures based on reduced graphene oxide - TiCT MXene hydrogels.

Two-dimensional (2D) materials remain highly interesting for assembling three-dimensional (3D) structures, amongst others, in the form of macroscopic hydrogels. Herein, we present a novel approach for inducing chemical inter-sheet crosslinks via an ethylenediamine mediated reaction between TiCT and graphene oxide in order to obtain a reduced graphene oxide-MXene (rGO-MXene) hydrogel. The composite hydrogels are hydrophilic with a stiffness of ~20 kPa.

Nanocomposite Gel as Injectable Therapeutic Scaffold: Microstructural Aspects and Bioactive Properties.

The development of tissue scaffolds able to provide proper and accelerated regeneration of tissue is a main task of tissue engineering. We developed a nanocomposite gel that may be used as an injectable therapeutic scaffold. The nanocomposite gel is based on biocompatible gelling agents with embedded nanoparticles (iron oxide, silver, and hydroxyapatite) providing therapeutic properties.

Effect of microencapsulated fish oil powder on selected quality characteristics of chicken sausages.

Background: Encapsulation of fish oil for use as oil powder for the human food industry offers new product design possibilities. The fat content of fish is unique in the amount of of long chain n-3 fatty acid that it contains. It can be expected that developing innovative food products with significantly improved nutritional value can simultaneously affect their rheological and sensory qualities in different ways.

Cytotoxicity Assessment of Ti-Al-C Based MAX Phases and TiCT MXenes on Human Fibroblasts and Cervical Cancer Cells.

MXenes are a novel family of 2D materials, which are extensively investigated for common use in energy storage systems, nanoelectronics, and electromagnetic shielding. Although their unique physicochemical properties render their wide applicability, their cytotoxic response and safety use still remain a concern. From this perspective, it is imperative to perform an in vitro investigation of the influence of different forms of MXenes and their precursors on the human cell lines.

Structural characterization of transfection nanosystems based on tricationic surfactants and short double stranded oligonucleotides.

For several years cationic surfactants have been the subjects of extensive studies as potential transgene carriers to be used in gene therapy. We report the formation of stable complexes between 21 base pairs oligonucleotides - siRNA, enhancing DMPK gene, and dsDNA and two tricationic surfactants (1,2,3-propanetri[oxymethyl-3-(1-dodecylimidazolium)]chloride and 1,2,3-propanetri[(oxymethyl)dimethyldodecylammonium]chloride. Structural studies by SAXS and TEM have shown that the dominant structure of the obtained lipoplexes is based on hexagonal, lamellar and cubic phases, packed in highly ordered aggregates.

Phenotypic plasticity of Escherichia coli upon exposure to physical stress induced by ZnO nanorods.

Evolution of bacteria to selective chemical pressure (e.g. antibiotics) is well studied in contrast to the influence of physical stressors.

The Influence of Oxygen Concentration during MAX Phases (Ti₃AlC₂) Preparation on the α-Al₂O₃ Microparticles Content and Specific Surface Area of Multilayered MXenes (Ti₃C₂T).

The high specific surface area of multilayered two-dimensional carbides called MXenes, is a critical feature for their use in energy storage systems, especially supercapacitors. Therefore, the possibility of controlling this parameter is highly desired. This work presents the results of the influence of oxygen concentration during Ti₃AlC₂ ternary carbide-MAX phase preparation on α-Al₂O₃ particles content, and thus the porosity and specific surface area of the Ti₃C₂T MXenes.

Gel with silver and ultrasmall iron oxide nanoparticles produced with Amanita muscaria extract: physicochemical characterization, microstructure analysis and anticancer properties.

Combination therapy remains one of the most promising and intensively developed direction in cancer treatment. This study is aimed to combine and investigate the anticancer properties of silver nanoparticles (NPs) and Amanita muscaria mushroom in gel formulation. For this, hyaluronic acid was used as gel-forming agent, whereas Amanita muscaria extract was used as capping agent during silver and ultrasmall iron oxide (MAg) NPs synthesis.

ZnS coating for enhanced environmental stability and improved properties of ZnO thin films.

Low environmental stability of ZnO nanostructures in hydrophilic systems is a crucial factor limiting their practical applications. ZnO nanomaterials need surface passivation with different water-insoluble compounds. This study describes a one-step passivation process of polycrystalline ZnO films with ZnS as a facile method of ZnO surface coating.

Silver and ultrasmall iron oxides nanoparticles in hydrocolloids: effect of magnetic field and temperature on self-organization.

Micro/nanostructures, which are assembled from various nanosized building blocks are of great scientific interests due to their combined features in the micro- and nanometer scale. This study for the first time demonstrates that ultrasmall superparamagnetic iron oxide nanoparticles can change the microstructure of their hydrocolloids under the action of external magnetic field. We aimed also at the establishment of the physiological temperature (39 °C) influence on the self-organization of silver and ultrasmall iron oxides nanoparticles (NPs) in hydrocolloids.

Green synthesis of rifampicin-loaded copper nanoparticles with enhanced antimicrobial activity.

The antimicrobial properties of copper and rifampicin-loaded copper nanoparticles were investigated using four strains: Staphylococcus aureus, Escherichia coli, Bacillus pumilis and Pseudomonas fluorescens. Spherical-shaped copper nanoparticles were synthesized via green reduction method from the peppermint extract. It was found that adsorption of rifampicin on the copper nanosurface enhances its biological activity and prevents the development of resistance.

Release and cytotoxicity studies of magnetite/Ag/antibiotic nanoparticles: An interdependent relationship.

Though the cytotoxic properties of magnetite nanoparticles (NPs) are rather well investigated and known to be dose dependent and rather low, surface functionalization can drastically change their properties. To determine whether the cytotoxicity of magnetite/Ag/antibiotic NPs may be associated, among other things, with iron, silver and antibiotic release, this study investigates the release profiles and cytotoxicity of magnetite/Ag/rifampicin and magnetite/Ag/doxycycline NPs compares it similar profiles from magnetite, magnetite/Ag NPs and antibiotics. It was established that the studied NPs released not only water-soluble substances, such as antibiotics, but also poorly-soluble ones, such as iron and silver.

Influence of silver content on rifampicin adsorptivity for magnetite/Ag/rifampicin nanoparticles.

Magnetite nanoparticles (NPs) decorated with silver (magnetite/Ag) are intensively investigated due to their application in the biomedical field. We demonstrate that the increase of silver content on the surface of nanoparticles improves the adsorptivity of antibiotic rifampicin as well as antibacterial properties. The use of ginger extract allowed to improve the silver nucleation on the magnetite surface that resulted in an increase of silver content.

iRGD peptide as effective transporter of CuInZnxS2+x quantum dots into human cancer cells.

In this paper, iRGD peptide-mediated quantum dots (QDs) delivery was studied. In the first step, dodecanethiol-capped CuInZnxS2+x (ZCIS) QDs were prepared and subsequently transferred into water using a standard and facile ligand exchange approach involving 3-mercaptopropionic acid (MPA). ZCIS@MPA nanocrystals possess a photoluminescence quantum yield (PL QY) of 25%, a PL emission centered at ca.

Synthesis and characterization of magnetite/silver/antibiotic nanocomposites for targeted antimicrobial therapy.

The article is devoted to preparation and characterization of magnetite/silver/antibiotic nanocomposites for targeted antimicrobial therapy. Magnetite nanopowder was produced by thermochemical technique; silver was deposited on the magnetite nanoparticles in the form of silver clusters. Magnetite/silver nanocomposite was investigated by XRD, SEM, TEM, AFM, XPS, EDX techniques.

Experimental and solid-state computational study of structural and dynamic properties in the equilibrium form of temazepam.

Structural properties and rotational dynamics of methyl groups in the most stable form of temazepam were investigated by means of (13)C CP MAS NMR, quasielastic neutron scattering (QENS), and (1)H NMR spin-lattice relaxation methods. The QENS and (1)H NMR studies reveal the inequivalency of methyl groups, delivering their activation parameters. The structural properties of the system were explored in frame of periodic density functional theory (DFT) computations, giving insight into the reorientational barriers and providing understanding of the solid-state NMR results.