Publications by authors named "Pennec Y"

Hepatitis E virus (HEV) is transmitted by the fecal route, usually through contaminated water in humans and/or infected animals, especially pigs. The objective of this study was to evaluate the level of anti-HEV antibodies in a panel of pig sera and to identify HEV in pig feces in farms. The presence of HEV antibodies was tested by an in-house ELISA and a commercial ELISA IDvet.

View Article and Find Full Text PDF

We theoretically study random arrangements of cylindrical gold nanoparticles (NPs) deposited on a dielectric/gold substrate. We use two methods, namely the Finite Element Method (FEM) and the Coupled Dipole Approximation (CDA) method. The FEM is increasingly used to analyze the optical properties of NPs, but calculations for arrangements containing a large number of NPs have a high computational cost.

View Article and Find Full Text PDF

We propose the design of a phononic crystal to sense the acoustic properties of a liquid that is constituted by an array of silicon ridges on a membrane. In contrast to other concepts, the ridges are immersed in the liquid. The introduction of a suitable cavity in the periodic array gives rise to a confined defect mode with high localization in the cavity region and strong solid-liquid interaction, which make it sensitive to the acoustic properties of the liquid.

View Article and Find Full Text PDF

This broad review summarizes recent advances and "hot" research topics in nanophononics and elastic, acoustic, and mechanical metamaterials based on results presented by the authors at the EUROMECH 610 Colloquium held on April 25-27, 2022 in Benicássim, Spain. The key goal of the colloquium was to highlight important developments in these areas, particularly new results that emerged during the last two years. This work thus presents a "snapshot" of the state-of-the-art of different nanophononics- and metamaterial-related topics rather than a historical view on these subjects, in contrast to a conventional review article.

View Article and Find Full Text PDF

The introduction of engineered resonance phenomena on surfaces has opened a new frontier in surface science and technology. Pillared phononic crystals, metamaterials, and metasurfaces are an emerging class of artificial structured media, featuring surfaces that consist of pillars-or branching substructures-standing on a plate or a substrate. A pillared phononic crystal exhibits Bragg band gaps, while a pillared metamaterial may feature both Bragg band gaps and local resonance hybridization band gaps.

View Article and Find Full Text PDF

Keeping the human body in a thermal comfort state inside a room has become a challenge in recent years. While the most common strategy is to heat buildings, it requires a lot of energy. Reducing this energy consumption will have positive impacts, both economically and environmentally.

View Article and Find Full Text PDF

We study numerically the absorption and scattering properties of a polymer photonic membrane to thermoregulate the human body microclimate which corresponds to the area between the skin and a textile. We first show that the structuration of the absorbing photonic membrane with air holes leads to a modulation of the optical spectrum in the Mid-Infrared range. Indeed, we show that the membrane is able to modulate the transmission amplitude by 28% in benefit or deficit of both the absorption and reflection.

View Article and Find Full Text PDF

We report on a new mechanism involving the torsional resonance of stubs to achieve the negative effective shear modulus of an elastic metamaterial plate. Combined with a mechanism to create a negative mass density, we develop a general method to set up and enlarge a shear-horizontal-polarized double-negative branch in the elastic metamaterial plate with stubs on both sides. We explore the capabilities of this structure for polarization filtering, mode conversion and abnormal refraction.

View Article and Find Full Text PDF

We demonstrate low-power amplification process in cavity optomechanics (COM). This operation is based on the nonlinear position-modulated self-Kerr interaction. Owing to this nonlinear term, the effective coupling highly scales with the photon number, resulting in a giant enhancement of the cooperativity.

View Article and Find Full Text PDF

In this contribution, a rigorous numerical calibration is proposed to characterize the excitation of propagating mechanical waves by interdigitated transducers (IDTs). The transition from IDT terminals to phonon waveguides is modeled by means of a general circuit representation that makes use of Scattering Matrix (SM) formalism. In particular, the three-step calibration approach called the Thru-Reflection-Line (TRL), that is a well-established technique in microwave engineering, has been successfully applied to emulate typical experimental conditions.

View Article and Find Full Text PDF

Determination of the mechanical properties of nanostructured soft materials and their composites in a quantitative manner is of great importance to improve the fidelity in their fabrication and to enable the subsequent reliable utility. Here, we report on the characterization of the elastic and photoelastic parameters of a periodic array of nanowalls (grating) by the non-invasive Brillouin light scattering technique and finite element calculations. The resolved elastic vibrational modes in high and low aspect ratio nanowalls reveal quantitative and qualitative differences related to the two-beam interference lithography fabrication and subsequent aging under ambient conditions.

View Article and Find Full Text PDF

The monochromatic and geometrically anisotropic acoustic field generated by 400 and 120 nm diameter copper nanowires simply dropped on a 10 μm silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both sides of the silicon substrate. In reflection, the first radial breathing mode of the nanowire is excited and detected.

View Article and Find Full Text PDF

In this work, we present a method for the design of gradient index devices for elastic waves in plates. The method allows the design of devices to control the three fundamental modes, despite the fact that their dispersion relation is managed by different elastic constants. It is shown that by means of complex graded phononic crystals and thickness variations it is possible to independently design the three refractive indexes of these waves, allowing therefore their simultaneous control.

View Article and Find Full Text PDF

We theoretically and experimentally demonstrate the existence of complete surface acoustic wave band gaps in surface phonon-polariton phononic crystals, in a completely monolithic structure formed from a two-dimensional honeycomb array of hexagonal shape domain-inverted inclusions in single crystal piezoelectric Z-cut lithium niobate. The band gaps appear at a frequency of about twice the Bragg band gap at the center of the Brillouin zone, formed through phonon-polariton coupling. The structure is mechanically, electromagnetically, and topographically homogeneous, without any physical alteration of the surface, offering an ideal platform for many acoustic wave applications for photonics, phononics, and microfluidics.

View Article and Find Full Text PDF

Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Among their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide gigahertz phonons suitable for coherent phonon manipulation. Different demonstrations of coupling of infrared photons and gigahertz phonons in cavities created by inserting defects on OM crystals have been performed.

View Article and Find Full Text PDF

We study simultaneous photonic and phononic crystal slabs created in Z-cut lithium niobate membranes. Bandgaps for guided waves are identified using the three-dimensional finite element method (FEM). Three lattices are considered: the square, the hexagonal, and the honeycomb lattices.

View Article and Find Full Text PDF

High-resolution Fourier transform scanning tunneling spectroscopy (FT-STS) is used to study many-body effects on the surface state of Ag(111). Our results reveal a kink in the otherwise parabolic band dispersion of the surface electrons and an increase in the quasiparticle lifetime near the Fermi energy Ef. The experimental data are accurately modeled with the T-matrix formalism for scattering from a single impurity, assuming that the surface electrons are dressed by the electron-electron and electron-phonon interactions.

View Article and Find Full Text PDF

We investigate theoretically the optomechanical interactions inside cavities created in two-dimensional infinite phoXonic crystals constituted by a square array of holes in silicon (Si) and gallium arsenide (GaAs) matrices. The cavity is simply obtained by removing one hole in the perfect crystal. Our calculations take into account two mechanisms that contribute to the optomechanical coupling, namely the bulk photoelastic effect and the deformations of the interfaces due to the acoustic strain.

View Article and Find Full Text PDF

The superconducting compound LiFeAs is studied by scanning tunneling microscopy and spectroscopy. A gap map of the unreconstructed surface indicates a high degree of homogeneity in this system. Spectra at 2 K show two nodeless superconducting gaps with Δ(1)=5.

View Article and Find Full Text PDF

We report the changes in dispersion relations of hypersonic acoustic phonons in free-standing silicon membranes as thin as ∼8 nm. We observe a reduction of the phase and group velocities of the fundamental flexural mode by more than 1 order of magnitude compared to bulk values. The modification of the dispersion relation in nanostructures has important consequences for noise control in nano- and microelectromechanical systems (MEMS/NEMS) as well as opto-mechanical devices.

View Article and Find Full Text PDF

The adsorption behavior of α-octithiophene (8T) on the Au(111) surface as a function of 8T coverage has been studied with low-temperature scanning tunneling microscopy, high resolution electron energy loss spectroscopy as well as with angle-resolved two-photon photoemission and ultraviolet photoemission spectroscopy. In the sub-monolayer regime 8T adopts a flat-lying adsorption geometry. Upon reaching the monolayer coverage the orientation of 8T molecules changes towards a tilted configuration, with the long molecular axis parallel to the surface plane, facilitating attractive intermolecular π-π-interactions.

View Article and Find Full Text PDF

We demonstrate theoretically that photons and acoustic phonons can be simultaneously guided and slowed down in specially designed nanostructures. Phoxonic crystal waveguides presenting simultaneous phononic and photonic band gaps were designed in perforated silicon membranes that can be conveniently obtained using silicon-on-insulator technology. Geometrical parameters for simultaneous photonic and phononic band gaps were first chosen for optical wavelengths around 1550 nm, based on the finite element analysis of a perfect phoxonic crystal of circular holes.

View Article and Find Full Text PDF

Scanning tunneling microscopy (STM) at liquid helium temperature is used to image potassium adsorbed on graphite at low coverage (≈0.02 monolayer). Single atoms appear as protrusions on STM topographs.

View Article and Find Full Text PDF

The use of an amorphous silicon-carbon alloy overcoating on silver nanostructures in a localized surface plasmon resonance (LSPR) sensing platform allows for decreasing the detection limit by an order of magnitude as compared to sensors based on gold nanostructures deposited on glass. In addition, silver based multilayer structures show a distinct plasmonic behaviour as compared to gold based nanostructures, which provides the sensor with an increased short-range sensitivity and a decreased long-range sensitivity.

View Article and Find Full Text PDF

Objectives: To assess the efficacy of the anti-CD20 antibody rituximab in improving physical function and health-related quality of life (HRQoL) in patients with active primary Sjögren's syndrome (pSS), as well as the duration and sources of HRQoL improvements.

Methods: Sixteen patients with pSS received rituximab infusions (375 mg/m2) at weeks 0 and 1 and were followed up for 36 weeks. All patients fulfilled 2002 American-European Consensus Group criteria for pSS and had active disease defined as scores >50 mm on two of four 100-mm visual analogue scales (VAS) evaluating global disease activity, fatigue, pain, and dryness.

View Article and Find Full Text PDF