Donor-acceptor bulk-heterojunction sensitizer for efficient solid-state infrared-to-visible photon up-conversion.

Solid-state infrared-to-visible photon up-conversion is important for spectral-tailoring applications. However, existing up-conversion systems not only suffer from low efficiencies and a need for high excitation intensity, but also exhibit a limited selection of materials and complex fabrication processes. Herein, we propose a sensitizer with a bulk-heterojunction structure, comprising both an energy donor and an energy acceptor, for triplet-triplet annihilation up-conversion devices.

Multifold Enhanced Photon Upconversion in a Composite Annihilator System Sensitized by Perovskite Nanocrystals.

Photon upconversion via triplet-triplet annihilation (TTA-UC) provides a pathway to overcoming the thermodynamic efficiency limits in single-junction solar cells by allowing the harvesting of sub-bandgap photons. Here, we use mixed halide perovskite nanocrystals (CsPbX, X = Br/I) as triplet sensitizers, with excitation transfer to 9,10-diphenylanthracene (DPA) and/or 9,10-bis[(triisopropylsilyl)ethynyl]anthracene (TIPS-An) which act as the triplet annihilators. We observe that the upconversion efficiency is five times higher with the combination of both annihilators in a composite system compared to the sum of the individual single-acceptor systems.

Low-Cost Fully Non-fused Ring Acceptor Enables Efficient Organic Photovoltaic Modules for Multi-Scene Applications.

Organic photovoltaic (OPV) cells, with highly tunable light-response ranges, offer significant potential for use in driving low-power consumption off-grid electronics in multi-scenarios. However, development of photoactive layer materials that can meet simultaneously the requirements of diverse irradiation conditions is a still challenging task. Herein, a low-cost fully non-fused acceptor (denoted as GS60) featuring well-matched absorption spectra with solar, scattered light and artificial light radiation was designed and synthesized.

Organic laser power converter for efficient wireless micro power transfer.

Wireless power transfer with collimated power transmission and efficient conversion provides an alternative charging mode for off-grid and portable micro-power electronics. However, charging micro-power electronics with low photon flux can be challenging for current laser power converters. Here we show laser power converters with organic photovoltaic cells with good performance for application in laser wireless power transfer.

Regulating Phase Separation Kinetics for High-Efficiency and Mechanically Robust All-Polymer Solar Cells.

All-polymer solar cells (all-PSCs) possess excellent operation stability and mechanical robustness than other types of organic solar cells, thereby attracting considerable attention for wearable flexible electron devices. However, the power conversion efficiencies (PCEs) of all-PSCs are still lagging behind those of small-molecule-acceptor-based systems owing to the limitation of photoactive materials and unsatisfactory blend morphology. In this work, a novel terpolymer, denoted as PBDB-TFCl (poly4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)benzo[1,2-b:4,5-b″]dithiophene-1,3-bis(2-ethylhexyl)-5,7-di(thiophen-2-yl)-4H,8H-benzo[1,2-c:4,5-c″]dithiophene-4,8-dione-4,8-bis(4-chloro-5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene), is used as an electron donor coupled with a ternary strategy to optimize the performance of all-PSCs.

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses.

Large voltage losses are the main obstacle for achieving high efficiency in organic solar cells (OSCs). Here we construct ternary OSCs by introducing an asymmetric small molecule acceptor AITC into PBDB-TCl : BTP-eC9 system and demonstrate the effectiveness in simultaneously decreasing energy disorder and non-radiative voltage losses. It is found that the introduction of AITC can modify domain size and increase the degree of crystallinity, which enhances open-circuit voltage and power conversion efficiency (19.

Binary Organic Solar Cells with 19.2% Efficiency Enabled by Solid Additive.

Morphology optimization is critical for achieving high efficiency and stable bulk-heterojunction (BHJ) organic solar cells (OSCs). Herein, the use of 3,5-dichlorobromobenzene (DCBB) with high volatility and low cost to manipulate evolution of the BHJ morphology and improve the operability and photostability of OSCs is proposed. Systematic simulations reveal the charge distribution of DCBB and its non-covalent interaction with the active layer materials.

Enhancing Photon Utilization Efficiency for High-Performance Organic Photovoltaic Cells via Regulating Phase-Transition Kinetics.

Efficient photon utilization is key to achieving high-performance organic photovoltaic (OPV) cells. In this study, a multiscale fibril network morphology in a PBQx-TCl:PBDB-TF:eC9-2Cl-based system is constructed by regulating donor and acceptor phase-transition kinetics. The distinctive phase-transition process and crystal size are systematically investigated.

A Medium-Bandgap Nonfullerene Acceptor Enabling Organic Photovoltaic Cells with 30% Efficiency under Indoor Artificial Light.

The correlation between molecular structure and photovoltaic performance is lagging for constructing high-performance indoor organic photovoltaic (OPV) cells. Herein, this relationship is investigated in depth by employing two medium-bandgap nonfullerene acceptors (NFAs). The newly synthesized NFA of FTCCBr exhibits a similar bandgap and molecular energy level, but a much stronger dipole moment and larger average electrostatic potential (ESP) compared with ITCC.

A New Polymer Donor Enables Binary All-Polymer Organic Photovoltaic Cells with 18% Efficiency and Excellent Mechanical Robustness.

The development of polymerized small-molecule acceptors has boosted the power conversion efficiencies (PCEs) of all-polymer organic photovoltaic (OPV) cells to 17%. However, the polymer donors suitable for all-polymer OPV cells are still lacking, restricting the further improvement of their PCEs. Herein, a new polymer donor named PQM-Cl is designed and its photovoltaic performance is explored.

A High-Performance Nonfused Wide-Bandgap Acceptor for Versatile Photovoltaic Applications.

Wide-bandgap (WBG) nonfullerene acceptors (NFAs) with nonfused conjugated structures play a critical role in organic photovoltaic (OPV) cells. Here, NFAs named GS-OEH, GS-OC6, and GS-ISO, with optical bandgaps larger than 1.70 eV, are synthesized without using the fused ring structures.

A Universal Nonhalogenated Polymer Donor for High-Performance Organic Photovoltaic Cells.

Nonhalogenated polymers have great potential in the commercialization of organic photovoltaic (OPV) cells due to their advantage in low-cost preparation. However, non-halogenated polymers usually have high highest occupied molecular orbital (HOMO) energy levels and inferior self-aggregation properties in solution, thus resulting in low power conversion efficiencies (PCEs). Herein, two nonhalogenated polymers, PB1 and PB2, are prepared.

18.5% Efficiency Organic Solar Cells with a Hybrid Planar/Bulk Heterojunction.

The donor:acceptor heterojunction has proved as the most successful approach to split strongly bound excitons in organic solar cells (OSCs). Establishing an ideal architecture with selective carrier transport and suppressed recombination is of great importance to improve the photovoltaic efficiency while remains a challenge. Herein, via tailoring a hybrid planar/bulk structure, highly efficient OSCs with reduced energy losses (E s) are fabricated.

Single-Junction Organic Photovoltaic Cell with 19% Efficiency.

Improving power conversion efficiency (PCE) is important for broadening the applications of organic photovoltaic (OPV) cells. Here, a maximum PCE of 19.0% (certified value of 18.

Suppressing Energetic Disorder Enables Efficient Indoor Organic Photovoltaic Cells With a PTV Derivative.

Indoor organic photovoltaics (IOPVs) cells have attracted considerable attention in the past few years. Herein, two PTV-derivatives, PTVT-V and PTVT-T, were used as donor materials to fabricate IOPV cells with ITCC as the acceptor. The preferred orientation of the crystals changed from edge-on to face-on after replacing the ethylene in the backbones of PTVT-V by the thiophene in that of PTVT-T.

Molecular design revitalizes the low-cost PTV-polymer for highly efficient organic solar cells.

Developing photovoltaic materials with simple chemical structures and easy synthesis still remains a major challenge in the industrialization process of organic solar cells (OSCs). Herein, an ester substituted poly(thiophene vinylene) derivative, PTVT-T, was designed and synthesized in very few steps by adopting commercially available raw materials. The ester groups on the thiophene units enable PTVT-T to have a planar and stable conformation.

Effect of the Energy Offset on the Charge Dynamics in Nonfullerene Organic Solar Cells.

The energy offset, considered as the driving force for charge transfer between organic molecules, has significant effects on both charge separation and charge recombination in organic solar cells. Herein, we designed material systems with gradually shifting energy offsets, including both positive and negative values. Time-resolved spectroscopy was used to monitor the charge dynamics within the bulk heterojunction.

Organic photovoltaic cell with 17% efficiency and superior processability.

The development of organic photoactive materials, especially the newly emerging non-fullerene electron acceptors (NFAs), has enabled rapid progress in organic photovoltaic (OPV) cells in recent years. Although the power conversion efficiencies (PCEs) of the top-performance OPV cells have surpassed 16%, the devices are usually fabricated via a spin-coating method and are not suitable for large-area production. Here, we demonstrate that the fine-modification of the flexible side chains of NFAs can yield 17% PCE for OPV cells.

Hole Transfer Originating from Weakly Bound Exciton Dissociation in Acceptor-Donor-Acceptor Nonfullerene Organic Solar Cells.

The underlying hole-transfer mechanism in high-efficiency OSC bulk heterojunctions based on acceptor-donor-acceptor (A-D-A) nonfullerene acceptors (NFAs) remains unclear. Herein, we study the hole-transfer process between copolymer donor J91 and five A-D-A NFAs with different highest occupied molecular orbital energy offsets (Δ) (0.05-0.

Morphology Control Enables Efficient Ternary Organic Solar Cells.

Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide-bandgap polymer PBT1-C as the donor, a crystalline fused-ring electron acceptor ITIC-2Cl, and an amorphous fullerene derivative indene-C bisadduct (ICBA) as the acceptor.

Improving the Compatibility of Donor Polymers in Efficient Ternary Organic Solar Cells via Post-Additive Soaking Treatment.

In dual-donor ternary organic solar cells, the compatibility between the donor polymers plays important roles to control the conformational change and govern the photophysical behavior in the blend films. Here, we apply a post-additive soaking (PAS) approach to reconstruct the morphology in a ternary organic photovoltaic BHJ of PTB7-Th: PCDTBT: PCBM. The PAS-treated device has a maximum power conversion efficiency (PCE) of about 8.

An Obvious Improvement in the Performance of Ternary Organic Solar Cells with "Guest" Donor Present at the "Host" Donor/Acceptor Interface.

A small-molecule material, 7,7-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophen]-5-yl)benzo-[c] [1,2,5]thiadiazole) (p-DTS(FBTTH2)2), was used to modify the morphology and electron-transport properties of the polymer blend of poly(3-hexythiophene) (P3HT) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) bulk heterojunctions. As a result, a 24% increase in the power-conversion efficiency (PCE) of the p-DTS(FBTTH2)2:P3HT:PC71BM ternary organic solar cells (OSCs) is obtained. The improvement in the performance of OSCs is attributed to the constructive energy cascade path in the ternary system that benefits an efficient Förster resonance energy/charge transfer process between P3HT and p-DTS(FBTTH2)2, thereby improving photocurrent generation.