Effect of Carbon Content and Boronizing Parameters on Growth Kinetics of Boride Layers Obtained on Carbon Steels.

Boronizing is a thermochemical treatment performed to produce hard and wear-resistant surface layers. In order to control the process and obtain boride layers with the desired properties, it is very important to know how the boronizing parameters and the chemical composition of the treated steel affect the boronizing. The aim of the present study is to investigate the influence of carbon content in carbon steels, boronizing temperature, and boronizing duration on the growth kinetics of boride layers.

Yield Load Solutions for SE(B) Fracture Toughness Specimen with I-Shaped Heterogeneous Weld.

The objective of this work was to investigate the fracture behavior of a heterogeneous I-shaped welded joint in the context of yield load solutions. The weld was divided into two equal parts, using the metal with the higher yield strength and the metal with the lower yield strength compared to base metal. For both configurations of the I-shaped weld, one with a crack in strength in the over-matched part of the weld and one for a crack in the under-matched part of the weld, a systematic study of fracture toughness SE(B) specimen was carried out in which the crack length, the width of the weld and the strength mismatch factor for both weld metals were varied, and the yield loads were determined.

Estimation of Integral for Mismatched Welded Compact Tension Specimen.

The integral for the compact tension (CT) specimen is calculated using the estimation equation in ASTM E1457-15. This equation was developed based on the assumption of material homogeneity and is not applicable to a welded CT specimen. In this paper, a modified equation for estimating the integral for a welded compact tension (CT) specimen under creep conditions is proposed.