A piperidinium salt stabilizes efficient metal-halide perovskite solar cells.

Longevity has been a long-standing concern for hybrid perovskite photovoltaics. We demonstrate high-resilience positive-intrinsic-negative perovskite solar cells by incorporating a piperidinium-based ionic compound into the formamidinium-cesium lead-trihalide perovskite absorber. With the bandgap tuned to be well suited for perovskite-on-silicon tandem cells, this piperidinium additive enhances the open-circuit voltage and cell efficiency.

Planar perovskite solar cells with long-term stability using ionic liquid additives.

Solar cells based on metal halide perovskites are one of the most promising photovoltaic technologies. Over the past few years, the long-term operational stability of such devices has been greatly improved by tuning the composition of the perovskites, optimizing the interfaces within the device structures, and using new encapsulation techniques. However, further improvements are required in order to deliver a longer-lasting technology.

Lasing from lead halide perovskite semiconductor microcavity system.

Organic-inorganic halide perovskite semiconductors are ideal gain media for fabricating laser and photonic devices due to high absorption, photoluminescence (PL) efficiency and low nonradiative recombination losses. Herein, organic-inorganic halide perovskite CH3NH3PbI3 is embedded in the Fabry-Perot (FP) microcavity, and a wavelength-tunable excitonic lasing with a threshold of 12.9 μJ cm-2 and the spectral coherence of 0.

Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots.

To improve the interfacial charge transfer that is crucial to the performance of perovskite solar cells, the interface engineering in a device should be rationally designed. Here we have developed an interface engineering method to tune the photovoltaic performance of planar-heterojunction perovskite solar cells by incorporating MAPbBr3-xIx (MA = CH3NH3) quantum dots (QDs) between the MAPbI3 perovskite film and the hole-transporting material (HTM) layer. By adjustment of the Br:I ratio, the as-synthesized MAPbBr3-xIx QDs show tunable fluorescence and band edge positions.

Solar-Energy-Driven Photoelectrochemical Biosensing Using TiO2 Nanowires.

Photoelectrochemical sensing represents a unique means for chemical and biological detection, with foci of optimizing semiconductor composition and electronic structures, surface functionalization layers, and chemical detection methods. Here, we have briefly discussed our recent developments of TiO2 nanowire-based photoelectrochemical sensing, with particular emphasis on three main detection mechanisms and corresponding examples. We have also demonstrated the use of the photoelectrochemical sensing of real-time molecular reaction kinetic measurements, as well as direct interfacing of living cells and probing of cellular functions.

High-performance perovskite photoanode enabled by Ni passivation and catalysis.

Lead halide perovskites have achieved phenomenal successes in photovoltaics due to their suitable bandgaps, long diffusion lengths, and balanced charge transport. However, the extreme susceptibility of perovskites to water or air has imposed a seemingly insurmountable barrier for leveraging these unique materials into solar-to-fuel applications such as photoelectrochemical conversion. Here we developed a CH3NH3PbI3-based photoanode with an ultrathin Ni surface layer, which functions as both a physical passivation barrier and a hole-transferring catalyst.

WO₃ nanoflakes for enhanced photoelectrochemical conversion.

We developed a postgrowth modification method of two-dimensional WO3 nanoflakes by a simultaneous solution etching and reducing process in a weakly acidic condition. The obtained dual etched and reduced WO3 nanoflakes have a much rougher surface, in which oxygen vacancies are created during the simultaneous etching/reducing process for optimized photoelectrochemical performance. The obtained photoanodes show an enhanced photocurrent density of ∼1.

Indirect growth of mesoporous Bi@C core-shell nanowires for enhanced lithium-ion storage.

In this paper, we propose a facile synthetic strategy for uniform bismuth@carbon (Bi@C) core-shell nanowires, which are prepared via controlled pyrolysis of Bi2S3@glucose-derived carbon-rich polysaccharide (GCP) nanowires under an inert atmosphere. Carbonization of GCP and pyrolysis of Bi2S3 into Bi occur at 500 °C and 600 °C, respectively, which increase the specific surface area and the pore volume of the nanowires, thus allowing accommodation of more lithium ions. Meanwhile, the carbon shell serves as a buffer layer to relieve large volume expansion-contraction during the electrochemical alloy formation, and can also efficiently reduce the aggregation of the nanowires.

Reversible chemical tuning of charge carriers for enhanced photoelectrochemical conversion and probing of living cells.

A facile, solution method for reversible tuning of oxygen vacancies inside TiO2 nanowires, in which the reducing treatment of TiO2 by NaBH4 leads to 2.4-fold increase of photocurrent density, compared to pristine TiO2 nanowires, is reported. Subsequent oxidizing treatment using KMnO4 or annealing in air can reset the photocurrent density to the original values.

Surface plasmon resonance enhanced real-time photoelectrochemical protein sensing by gold nanoparticle-decorated TiO₂ nanowires.

Recently developed photoelectrochemical (PEC) sensing systems represent a unique potential detection method for real-time analysis of chemical/biological molecules, while the low absorption of TiO2 nanomaterials in the visible wavelength region and the slow surface charge transfer efficiency limit the ultimate sensitivity. Here we develop a gold nanoparticle-decorated TiO2 nanowire sensor for PEC detection of protein binding. The direct attachment of Au nanoparticles to TiO2 nanowires offers strong surface plasmon resonance for electrochemical field effect amplification, yielding a ~100% increase of photocurrent density.

Solar-driven photoelectrochemical probing of nanodot/nanowire/cell interface.

We report a nitrogen-doped carbon nanodot (N-Cdot)/TiO2 nanowire photoanode for solar-driven, real-time, and sensitive photoelectrochemical probing of the cellular generation of H2S, an important endogenous gasotransmitter based on a tunable interfacial charge carrier transfer mechanism. Synthesized by a microwave-assisted solvothermal method and subsequent surface chemical conjugation, the obtained N-Cdot/TiO2 nanowire photoanode shows much enhanced photoelectrochemical photocurrent compared with pristine TiO2 nanowires. This photocurrent increase is attributed to the injection of photogenerated electrons from N-Cdots to TiO2 nanowires, confirmed by density functional theory simulation.

WO3-reduced graphene oxide composites with enhanced charge transfer for photoelectrochemical conversion.

Hybrid structures between semiconducting metal oxides and carbon with rational synthesis represent unique device building blocks to optimize the light absorption and charge transfer process for the photoelectrochemical conversion. Here we demonstrate the realization of a WO3-reduced graphene oxide (RGO) nanocomposite via hydrothermal growth of ultrathin WO3 nanoplates directly on fluorine-doped tin oxide (FTO) substrates, followed by in situ photo-reduction to deposit RGO layers on WO3 nanoplate surface. Photoanodes made of the WO3-RGO nanocomposites have achieved a photocurrent density of 2.

Silicon nanowires for biosensing, energy storage, and conversion.

Semiconducting silicon nanowires (SiNWs) represent one of the most interesting research directions in nanoscience and nanotechnology, with capabilities of realizing structural and functional complexity through rational design and synthesis. The exquisite control of chemical composition, structure, morphology, doping, and assembly of SiNWs, in both individual and array format, as well as incorporation with other materials, offers a nanoscale building block with unique electronic, optoelectronic, and catalytic properties, thus allowing for a variety of exciting opportunities in the fields of life sciences and renewable energy. This review provides a brief summary of SiNW research in the past decade, from the SiNW synthesis by both the top-down approaches and the bottom-up approaches, to several important biological and energy applications including biomolecule sensing, interfacing with cells and tissues, lithium-ion batteries, solar cells, and photoelectrochemical conversion.

Controlled Sn-doping in TiO2 nanowire photoanodes with enhanced photoelectrochemical conversion.

We demonstrate for the first time the controlled Sn-doping in TiO(2) nanowire (NW) arrays for photoelectrochemical (PEC) water splitting. Because of the low lattice mismatch between SnO(2) and TiO(2), Sn dopants are incorporated into TiO(2) NWs by a one-pot hydrothermal synthesis with different ratios of SnCl(4) and tetrabutyl titanate, and a high acidity of the reactant solution is critical to control the SnCl(4) hydrolysis rate. The obtained Sn-doped TiO(2) (Sn/TiO(2)) NWs are single crystalline with a rutile structure, and the incorporation of Sn in TiO(2) NWs is well controlled at a low level, that is, 1-2% of Sn/Ti ratio, to avoid phase separation or interface scattering.

Unconventional 0-, 1-, and 2-dimensional single-crystalline copper sulfide nanostructures.

We report the synthesis of several unconventional 0-, 1- and 2-dimensional copper sulfide nanostrucutures by the chemical vapor deposition method. The key factor for morphology and structure control of a variety of copper sulfide products is the tuning of deposition and growth temperature to fit for the surface energy barriers and promote different growth directions. At a high growth temperature (480 °C) that provides enough thermal energy, a 0-D octahedral copper sulfide single crystal structure was synthesized.