Reliability and Validity of the Timed Up and Go Test With a Motor Task in People With Chronic Stroke.

Objectives: To examine (1) the intra-rater, interrater, and test-retest reliabilities of the timed Up and Go test with a motor task (TUG) in terms of the number of steps taken in the test and completion time in a population with chronic stroke; (2) the relation between stroke-specific impairments and the number of steps taken in the test and the completion time; (3) the minimum detectable change in TUG times; and (4) the cutoff time that best discriminates the performance of people with stroke from that of older adults without stroke.

Design: Cross-sectional study.

Setting: University-based rehabilitation center.

Acoustically-driven thread-based tuneable gradient generators.

Thread-based microfluidics offer a simple, easy to use, low-cost, disposable and biodegradable alternative to conventional microfluidic systems. While it has recently been shown that such thread networks facilitate manipulation of fluid samples including mixing, flow splitting and the formation of concentration gradients, the passive capillary transport of fluid through the thread does not allow for precise control due to the random orientation of cellulose fibres that make up the thread, nor does it permit dynamic manipulation of the flow. Here, we demonstrate the use of high frequency sound waves driven from a chip-scale device that drives rapid, precise and uniform convective transport through the thread network.

Assessment of the potential of a high frequency acoustomicrofluidic nebulisation platform for inhaled stem cell therapy.

Despite the promise of stem cell therapy for lung therapeutics and repair, there are few viable means for directly delivering stem cells to locally target the respiratory airways via inhalation. This is not surprising given the significant challenges in aerosolising stem cells, particularly given their susceptibility to damage under the large stresses involved in the nebulisation process. Here, we present promising results using a microfluidic acoustic nebulisation platform that is not only low cost and portable, but also its high MHz order frequencies are effective for preserving the structural and functional integrity of mesenchymal stem cells (MSCs) during the nebulisation process.

Hydrogels with Tunable Properties.

This chapter describes the preparation of tissue engineered constructs by immobilizing chondrocytes in hydrogel with independently tunable porosity and mechanical properties. This chapter also presents the methods to characterize these tissue engineered constructs. The resulting tissue engineered constructs can be useful for the generation of cartilage tissue both in vitro and in vivo.

A Periosteum-Inspired 3D Hydrogel-Bioceramic Composite for Enhanced Bone Regeneration .

A 3D injectable hydrogel-bioceramic composite consisting of gelatin-3-(4-hydroxyphenyl) propionic acid (Gtn-HPA) and carboxymethyl cellulose-tyramine (CMC-Tyr), incorporated with fish scale-derived calcium phosphate (CaP), is developed for bone applications. The hydrogel-bioceramic composite has significantly improved the elastic modulus compared to the non-filled hydrogel, of which the addition of 10 w/v% CaP showed zero order fluorescein isothiocyanate (FITC)-dextran release profile and a significantly higher proliferation rate of encapsulated cells. All the samples promote the nucleation and growth of CaP minerals when exposed to 1× SBF.

Cardiogenesis of embryonic stem cells with liquid marble micro-bioreactor.

A liquid marble micro-bioreactor is prepared by placing a drop of murine embryonic stem cell (ESC) (Oct4B2-ESC) suspension onto a polytetrafluoroethylene (PTFE) particle bed. The Oct4B2-ESC aggregates to form embryoid bodies (EBs) with relatively uniform size and shape in a liquid marble within 3 d. For the first time, the feasibility of differentiating ESC into cardiac lineages within liquid marbles is being investigated.

Effects of GDNF-loaded injectable gelatin-based hydrogels on endogenous neural progenitor cell migration.

Brain repair following disease and injury is very limited due to difficulties in recruiting and mobilizing stem cells towards the lesion. More importantly, there is a lack of structural and trophic support to maintain viability of the limited stem/progenitor cells present. This study investigates the effectiveness of an injectable gelatin-based hydrogel in attracting neural progenitor cells (NPCs) from the subventricular zone (SVZ) towards the implant.

Injectable 3D hydrogel scaffold with tailorable porosity post-implantation.

Since rates of tissue growth vary significantly between tissue types, and also between individuals due to differences in age, dietary intake, and lifestyle-related factors, engineering a scaffold system that is appropriate for personalized tissue engineering remains a significant challenge. In this study, a gelatin-hydroxyphenylpropionic acid/carboxylmethylcellulose-tyramine (Gtn-HPA/CMC-Tyr) porous hydrogel system that allows the pore structure of scaffolds to be altered in vivo after implantation is developed. Cross-linking of Gtn-HPA/CMC-Tyr hydrogels via horseradish peroxidase oxidative coupling is examined both in vitro and in vivo.

Hydroxypropyl cellulose methacrylate as a photo-patternable and biodegradable hybrid paper substrate for cell culture and other bioapplications.

In addition to the choice of appropriate material properties of the tissue construct to be used, such as its biocompatibility, biodegradability, cytocompatibility, and mechanical rigidity, the ability to incorporate microarchitectural patterns in the construct to mimic that found in the cellular microenvironment is an important consideration in tissue engineering and regenerative medicine. Both these issues are addressed by demonstrating a method for preparing biodegradable and photo-patternable constructs, where modified cellulose is cross-linked to form an insoluble structure in an aqueous environment. Specifically, hydroxypropyl cellulose (HPC) is rendered photocrosslinkable by grafting with methylacrylic anhydride, whose linkages also render the cross-linked construct hydrolytically degradable.

Thermoresponsive cellulosic hydrogels with cell-releasing behavior.

Here we report the preparation and characterization of thermoresponsive cellulosic hydrogels with cell-releasing behavior. Hydroxypropyl cellulose (HPC) was modified with methacrylic anhydride (MA). The resultant macromonomer, HPC-MA, retains the characteristic thermoresponsive phase behavior of HPC, with an onset temperature of 36 °C and a lower critical solution temperature (LCST) of 37-38 °C, as determined by turbidity measurement.

Tumor inside a pearl drop.

The confined internal space of a liquid marble, as well as its porous and non-adhesive shell, offers an attractive application possibility - accommodating living cells inside liquid marbles. Cancer cells in suspension may aggregate to form three dimensional structures, also known as cancer cell spheroids (CCS). In this study, CCS formation inside liquid marble is investigated.

Three-dimensional nanocharacterization of porous hydrogel with ion and electron beams.

Porous hydrogels provide an excellent environment for cell growth and tissue regeneration, with high permeability for oxygen, nutrients, and other water-soluble metabolites through their high water-content matrix. The ability to image three-dimensional (3D) cell growth is crucial for understanding and studying various cellular activities in 3D context, particularly for designing new tissue engineering scaffold, but it is still challenging to study cell-biomaterial interfaces with high resolution imaging. We demonstrate using focused ion beam (FIB) milling, electron imaging, and associated microanalysis techniques that novel 3D characterizations can be performed effectively on cells growing inside 3D hydrogel scaffold.

Miniaturized Lab-on-a-Disc (miniLOAD).

A miniaturized centrifugal microfluidic platform for lab-on-a-chip applications is presented. Unlike its macroscopic Lab-on-a-CD counterpart, the miniature Lab-on-a-Disc (miniLOAD) device does not require moving parts to drive rotation of the disc, is inexpensive, disposable, and significantly smaller, comprising a 10-mm-diameter SU-8 disc fabricated through two-step photolithography. The disc is driven to rotate using surface acoustic wave irradiation incident upon a fluid coupling layer from a pair of offset, opposing single-phase unidirectional transducers patterned on a lithium niobate substrate.

Production of monodisperse epigallocatechin gallate (EGCG) microparticles by spray drying for high antioxidant activity retention.

Epigallocatechin gallate (EGCG) originated from green tea is well-known for its pharmaceutical potential and antiproliferating effect on carcinoma cells. For drug delivery, EGCG in a micro-/nanoparticle form is desirable for their optimized chemopreventive effect. In this study, first time reports that EGCG microparticles produced by low temperature spray drying can maintain high antioxidant activity.

Microfluidic devices for bioapplications.

Harnessing the ability to precisely and reproducibly actuate fluids and manipulate bioparticles such as DNA, cells, and molecules at the microscale, microfluidics is a powerful tool that is currently revolutionizing chemical and biological analysis by replicating laboratory bench-top technology on a miniature chip-scale device, thus allowing assays to be carried out at a fraction of the time and cost while affording portability and field-use capability. Emerging from a decade of research and development in microfluidic technology are a wide range of promising laboratory and consumer biotechnological applications from microscale genetic and proteomic analysis kits, cell culture and manipulation platforms, biosensors, and pathogen detection systems to point-of-care diagnostic devices, high-throughput combinatorial drug screening platforms, schemes for targeted drug delivery and advanced therapeutics, and novel biomaterials synthesis for tissue engineering. The developments associated with these technological advances along with their respective applications to date are reviewed from a broad perspective and possible future directions that could arise from the current state of the art are discussed.

The role of stiffness of gelatin-hydroxyphenylpropionic acid hydrogels formed by enzyme-mediated crosslinking on the differentiation of human mesenchymal stem cell.

We report the stimulation of neurogenesis and myogenesis of human mesenchymal stem cells (hMSCs) on the surfaces of biodegradable hydrogels with different stiffness. The hydrogels were composed of gelatin-hydroxyphenylpropionic acid (Gtn-HPA) conjugate were formed using the oxidative coupling of phenol moieties catalyzed by hydrogen peroxide (H(2)O(2)) and horseradish peroxidase (HRP). The storage modulus of the hydrogels was readily tuned from 600 to 12800 Pa.

Injectable biodegradable hydrogels with tunable mechanical properties for the stimulation of neurogenesic differentiation of human mesenchymal stem cells in 3D culture.

We report an injectable hydrogel scaffold system with tunable stiffness for controlling the proliferation rate and differentiation of human mesenchymal stem cells (hMSCs) in a three-dimensional (3D) context in normal growth media. The hydrogels composed of gelatin-hydroxyphenylpropionic acid (Gtn-HPA) conjugate were formed using the oxidative coupling of HPA moieties catalyzed by hydrogen peroxide (H(2)O(2)) and horseradish peroxidase (HRP). The stiffness of the hydrogels was readily tuned by varying the H(2)O(2) concentration without changing the concentration of polymer precursor.

In vitro cytotoxicity evaluation of biomedical nanoparticles and their extracts.

The present study presents a new approach for evaluating in vitro cytotoxicity of nanoparticles. The approach is based on American National Standard ISO 10993-5. Hepatoma HepG2 and fibroblast NIH3T3 cell lines were incubated with nanoparticles, and their associated extracts were derived at 70 and 121 degrees C.

Gait analysis of low-cost flexible-shank transtibial prostheses.

The latest lower-limb prosthetic designs have been incorporated with dynamic elastic response (DER) components to enhance prosthesis flexibility, which are suggested to be beneficial to gait. Although DER prosthetic. feet are preferred by most transtibial amputees and their benefits to gait are supported by some biomechanical studies, many are still utilizing the simple conventional solid ankle cushioned heel (SACH) designs because of the lower cost.