Tailoring DNA Surface Interactions on Single-Layer Graphene: Comparative Analysis of Pyrene, Acridine, and Fluorenyl Methyl Linkers.

This study investigates the effect of different linkers and solvents on the immobilization of DNA probes on graphene surfaces, which are crucial for developing high-performance biosensors. Quartz crystal microbalance with dissipation (QCM-D) measurements were used to characterize in situ and real-time the immobilization of ssDNA and hybridization efficiency on model graphene surfaces. The DNA probes immobilization kinetics and thermodynamics were systematically investigated for all the pairings between three bifunctional linkers─1-pyrenebutyric acid succinimidyl ester (PBSE), Fluorenylmethylsuccinimidyl carbonate (FSC), and Acridine Orange (AO) succinimidyl ester─and three organic solvents (DMF, DMSO, and 10% DMF/ethanol).

DNA Hybridization Kinetics Observed at the Single-Molecule Level Using Graphene Near-Field Effects.

We present the development of an advanced sensing platform using a monolayer of graphene functionalized with fluorophore-labeled DNA hairpins to detect the kinetics of single hairpins during the hybridization reaction. The near-field photonic effects of graphene induce a distance-dependent quenching effect on the attached fluorescent labels, resulting in distinct optical signals in response to axial displacements resulting from DNA hybridization. Employing a wide-field Total Internal Reflection Fluorescence (TIRF) optical setup coupled with a sensitive Electron-Multiplying Charge-Coupled Device (EM-CCD) camera, we successfully detected fluorescent signals of individual or a low number of individual DNA hairpins within a low-concentration environment DNA target (tDNA).

Bipolar Resistive Switching in 2D MoSe Grown by Atmospheric Pressure Chemical Vapor Deposition.

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) are highly promising nanomaterials for various electronic devices such as field-effect transistors, junction diodes, tunneling devices, and, more recently, memristors. 2D MoSe stands out for having high electrical conductivity, charge carrier mobility, and melting point. While these features make it particularly appropriate as a switching layer in memristive devices, reliable and scalable production of large-area 2D MoSe still represents a challenge.

Solution-Processed Functionalized Graphene Film Prepared by Vacuum Filtration for Flexible NO Sensors.

Large-scale production of graphene nanosheets (GNSs) has led to the availability of solution-processable GNSs on the commercial scale. The controlled vacuum filtration method is a scalable process for the preparation of wafer-scale films of GNSs, which can be used for gas sensing applications. Here, we demonstrate the use of this deposition method to produce functional gas sensors, using a chemiresistor structure from GNS solution-based techniques.

Extraction of Graphene's RF Impedance through Thru-Reflect-Line Calibration.

Graphene has unique properties that can be exploited for radiofrequency applications. Its characterization is key for the development of new graphene devices, circuits, and systems. Due to the two-dimensional nature of graphene, there are challenges in the methodology to extract relevant characteristics that are necessary for device design.

Integrated Approach from Sample-to-Answer for Grapevine Varietal Identification on a Portable Graphene Sensor Chip.

Identifying grape varieties in wine, related products, and raw materials is of great interest for enology and to ensure its authenticity. However, these matrices' complexity and low DNA content make this analysis particularly challenging. Integrating DNA analysis with 2D materials, such as graphene, offers an advantageous pathway toward ultrasensitive DNA detection.

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film.

Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method.

Attomolar detection of hepatitis C virus core protein powered by molecular antenna-like effect in a graphene field-effect aptasensor.

Biosensors based on graphene field-effect transistors have become a promising tool for detecting a broad range of analytes. However, their performance is substantially affected by the functionalization protocol. In this work, we use a controlled in-vacuum physical method for the covalent functionalization of graphene to construct ultrasensitive aptamer-based biosensors (aptasensors) able to detect hepatitis C virus core protein.

Ultrasensitive dopamine detection with graphene aptasensor multitransistor arrays.

Detecting physiological levels of neurotransmitters in biological samples can advance our understanding of brain disorders and lead to improved diagnostics and therapeutics. However, neurotransmitter sensors for real-world applications must reliably detect low concentrations of target analytes from small volume working samples. Herein, a platform for robust and ultrasensitive detection of dopamine, an essential neurotransmitter that underlies several brain disorders, based on graphene multitransistor arrays (gMTAs) functionalized with a selective DNA aptamer is presented.

Optimizing PMMA solutions to suppress contamination in the transfer of CVD graphene for batch production.

Mass production and commercial adoption of graphene-based devices are held back by a few crucial technical challenges related to quality control. In the case of graphene produced by chemical vapor deposition, the transfer process represents a delicate step that can compromise device performance and reliability, thus hindering industrial production. In this context, the impact of poly(methyl methacrylate) (PMMA), the most common support material for transferring graphene from the Cu substrate to any target surface, can be decisive in obtaining reproducible sample batches.

Spectral-temporal luminescence properties of Colloidal CdSe/ZnS Quantum Dots in relevant polymer matrices for integration in low turn-on voltage AC-driven LEDs.

This work employs spectral and spectral-temporal Photoluminescence (PL) spectroscopy techniques to study the radiative mechanisms in colloidal CdSe/ZnS Quantum Dot (QD) thin films without and with 1% PMMA polymer matrix embedding (QD). The observed bimodal transient-spectral PL distributions reveal bandgap transitions and radiative recombinations after interdot electron transfer. The PMMA polymer embedding protects the QDs during the plasma-sputtering of inorganic layers electroluminescent (EL) devices, with minimal impact on the charge transfer properties.

Seedless Cu Electroplating on Co-W Thin Films in Low pH Electrolyte: Early Stages of Formation.

The use of Ta/TaN barrier bilayer systems in electronic applications has been ubiquitous over the last decade. Alternative materials such as Co-W or Ru-W alloys have gathered interest as possible replacements due to their conjugation of favourable electrical properties and barrier layer efficiency at reduced thicknesses while enabling seedless Cu electroplating. The microstructure, morphology, and electrical properties of Cu films directly electrodeposited onto Co-W or Ru-W are important to assess, concomitant with their ability to withstand the electroplating baths/conditions.

Efficient ReSe Photodetectors with CVD Single-Crystal Graphene Contacts.

Rhenium-based 2D transition metal dichalcogenides such as ReSe are suitable candidates as photoactive materials for optoelectronic devices. Here, photodetectors based on mechanically exfoliated ReSe crystals were fabricated using chemical vapor deposited (CVD) graphene single-crystal (GSC) as lateral contacts. A "pick & place" method was adopted to transfer the desired crystals to the intended position, easing the device fabrication while reducing potential contaminations.

Interactions Between 2D Materials and Living Matter: A Review on Graphene and Hexagonal Boron Nitride Coatings.

Two-dimensional material (2DM) coatings exhibit complex and controversial interactions with biological matter, having shown in different contexts to induce bacterial cell death and contribute to mammalian cell growth and proliferation and tissue differentiation . Although several reports indicate that the morphologic and electronic properties of the coating, as well as its surface features (e.g.

Influence of the Electrolyte Salt Concentration on DNA Detection with Graphene Transistors.

Liquid-gated Graphene Field-Effect Transistors (GFET) are ultrasensitive bio-detection platforms carrying out the graphene's exceptional intrinsic functionalities. Buffer and dilution factor are prevalent strategies towards the optimum performance of the GFETs. However, beyond the Debye length (λD), the role of the graphene-electrolytes' ionic species interactions on the DNA behavior at the nanoscale interface is complicated.

Clean-Room Lithographical Processes for the Fabrication of Graphene Biosensors.

This work is on developing clean-room processes for the fabrication of electrolyte-gate graphene field-effect transistors at the wafer scale for biosensing applications. Our fabrication process overcomes two main issues: removing surface residues after graphene patterning and the dielectric passivation of metallic contacts. A graphene residue-free transfer process is achieved by using a pre-transfer, sacrificial metallic mask that protects the entire wafer except the areas around the channel, source, and drain, onto which the graphene film is transferred and later patterned.

Non-invasive molecular assessment of human embryo development and implantation potential.

In vitro fertilization (IVF) is the most common assisted reproductive technology used to treat infertility. Embryo selection for transfer in IVF cycles relies on the morphological evaluation by embryologists, either by conventional microscopic assessment or more recently by time-lapse imaging systems. Despite the introduction of time-lapse imaging improvements in IVF success rates have failed to materialize, therefore alternative approaches are needed.

Attomolar Label-Free Detection of DNA Hybridization with Electrolyte-Gated Graphene Field-Effect Transistors.

In this work, we develop a field-effect transistor with a two-dimensional channel made of a single graphene layer to achieve label-free detection of DNA hybridization down to attomolar concentration, while being able to discriminate a single nucleotide polymorphism (SNP). The SNP-level target specificity is achieved by immobilization of probe DNA on the graphene surface through a pyrene-derivative heterobifunctional linker. Biorecognition events result in a positive gate voltage shift of the graphene charge neutrality point.

Atomic-layer-deposited ultrafine MoS nanocrystals on cobalt foam for efficient and stable electrochemical oxygen evolution.

Ultrafine molybdenum sulfide (MoS) nanocrystals are grown on a porous cobalt (Co) foam current collector by atomic layer deposition (ALD) using molybdenum hexacarbonyl and hydrogen sulfide as precursors. When used to catalyze the oxygen evolution reaction (OER), the optimal Co@MoS electrode, even with a MoS loading as small as 0.06 mg cm, exhibits a large cathodic shift of ca.

Silicon nanowire arrays coupled with cobalt phosphide spheres as low-cost photocathodes for efficient solar hydrogen evolution.

We demonstrate the first example of silicon nanowire array photocathodes coupled with hollow spheres of the emerging earth-abundant cobalt phosphide catalysts. Compared to bare silicon nanowire arrays, the hybrid electrodes exhibit significantly improved photoelectrochemical performance toward the solar-driven H2 evolution reaction.

Cohesive strength of nanocrystalline ZnO:Ga thin films deposited at room temperature.

In this study, transparent conducting nanocrystalline ZnO:Ga (GZO) films were deposited by dc magnetron sputtering at room temperature on polymers (and glass for comparison). Electrical resistivities of 8.8 × 10-4 and 2.