Surface Finishing and Coating Parameters Impact on Additively Manufactured Binder-Jetted Steel-Bronze Composites.

In this paper, electroless nickel plating is explored for the protection of binder-jetting-based additively manufactured (AM) composite materials. Electroless nickel plating was attempted on binder-jetted composites composed of stainless steel and bronze, resulting in differences in the physicochemical properties. We investigated the impact of surface finishing, plating solution chemistry, and plating parameters to attain a wide range of surface morphologies and roughness levels.

Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples.

Additively manufactured metal components often have rough and uneven surfaces, necessitating post-processing and surface polishing. Hardness is a critical characteristic that affects overall component properties, including wear. This study employed K-means unsupervised machine learning to explore the relationship between the relative surface hardness and scratch width of electroless nickel plating on additively manufactured composite components.

Magnetic molecules lose identity when connected to different combinations of magnetic metal electrodes in MTJ-based molecular spintronics devices (MTJMSD).

Understanding the magnetic molecules' interaction with different combinations of metal electrodes is vital to advancing the molecular spintronics field. This paper describes experimental and theoretical understanding showing how paramagnetic single-molecule magnet (SMM) catalyzes long-range effects on metal electrodes and, in that process, loses its basic magnetic properties. For the first time, our Monte Carlo simulations, verified for consistency with regards to experimental studies, discuss the properties of the whole device and a generic paramagnetic molecule analog (GPMA) connected to the combinations of ferromagnet-ferromagnet, ferromagnet-paramagnet, and ferromagnet-antiferromagnet metal electrodes.

Competing Easy-Axis Anisotropies Impacting Magnetic Tunnel Junction-Based Molecular Spintronics Devices (MTJMSDs).

Molecular spintronics devices (MSDs) attempt to harness molecules' quantum state, size, and configurable attributes for application in computer devices-a quest that began more than 70 years ago. In the vast number of theoretical studies and limited experimental attempts, MSDs have been found to be suitable for application in memory devices and futuristic quantum computers. MSDs have recently also exhibited intriguing spin photovoltaic-like phenomena, signaling their potential application in cost-effective and novel solar cell technologies.

Spin state of a single-molecule magnet (SMM) creating long-range ordering on ferromagnetic layers of a magnetic tunnel junction - a Monte Carlo study.

Paramagnetic single-molecule magnets (SMMs) interacting with the ferromagnetic electrodes of a magnetic tunnel junction (MTJ) produce a new system. The properties and future scope of new systems differ dramatically from the properties of isolated molecules and ferromagnets. However, it is unknown how far deep in the ferromagnetic electrode the impact of the paramagnetic molecule and ferromagnet interactions can travel for various levels of molecular spin states.

Easy axis anisotropy creating high contrast magnetic zones on magnetic tunnel junctions based molecular spintronics devices (MTJMSD).

Magnetic tunnel junction-based molecular spintronics device (MTJMSD) may enable novel magnetic metamaterials by chemically bonding magnetic molecules and ferromagnets (FM) with a vast range of magnetic anisotropy. MTJMSD have experimentally shown intriguing microscopic phenomenon such as the development of highly contrasting magnetic phases on a ferromagnetic electrode at room temperature. This paper focuses on Monte Carlo Simulations (MCS) on MTJMSD to understand the potential mechanism and explore fundamental knowledge about the impact of magnetic anisotropy.

Molecular coupling competing with defects within insulator of the magnetic tunnel junction-based molecular spintronics devices.

Nearly 70 years old dream of incorporating molecule as the device element is still challenged by competing defects in almost every experimentally tested molecular device approach. This paper focuses on the magnetic tunnel junction (MTJ) based molecular spintronics device (MTJMSD) method. An MTJMSD utilizes a tunnel barrier to ensure a robust and mass-producible physical gap between two ferromagnetic electrodes.

The prospective application of a graphene/MoS heterostructure in Si-HIT solar cells for higher efficiency.

The efficiency of a Si-HIT (heterojunction with intrinsic thin layer) solar cell based on a graphene/MoS heterostructure has been optimized by varying the various parameters of graphene (Gr) as a transparent conducting electrode (TCE) and n-type molybdenum disulfide (n-MoS) as an emitter layer. The photovoltaic performance of a graphene/n-MoS/a-Si:H/p-cSi/Au single facial HIT solar cell has been studied using AFORS-HET v2.5 simulation software.

Exploring room-temperature transport of single-molecule magnet-based molecular spintronics devices using the magnetic tunnel junction as a device platform.

A device architecture utilizing a single-molecule magnet (SMM) as a device element between two ferromagnetic electrodes may open vast opportunities to create novel molecular spintronics devices. Here, we report a method of connecting an SMM to the ferromagnetic electrodes. We utilized a nickel (Ni)-AlO -Ni magnetic tunnel junction (MTJ) with the exposed side edges as a test bed.

Molecular spintronics devices exhibiting properties of a solar cell.

Almost all the solar cells created so far have been based on electronic charge. This paper reports a photovoltaic effect based on the spin property of electrons. This spin-based photovoltaic effect was observed on magnetic tunnel junction based molecular spintronics devices (MTJMSD).

Facile Synthesis of Semiconducting Ultrathin Layer of Molybdenum Disulfide.

In this paper, we have reported a simple and efficient method for the synthesis of uniform, highly conducting single or few layer molybdenum disulfide (MoS2) on large scale. Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM) have been used for the confirmation of mono or few layered nature of the as-synthesized MoS2 sheets. X-ray Photoelectron Spectroscopy (XPS), X-Ray Diffraction (XRD) and Raman Spectroscopy have also been used to study the elemental, phase, and molecular composition of the sample.

Fe3C-filled carbon nanotubes: permanent cylindrical nanomagnets possessing exotic magnetic properties.

The present study aims to deduce the confinement effect on the magnetic properties of iron carbide (Fe3C) nanorods filled inside carbon nanotubes (CNTs), and to document any structural phase transitions that can be induced by compressive/tensile stress generated within the nanorod. Enhancement in the magnetic properties of the nanorods is attributed to tensile stress as well as to compression, present in the radial direction and along the nanotube axis, respectively. Finally, the growth of permanent cylindrical nanomagnets has been optimized by applying a field gradient.

Paramagnetic molecule induced strong antiferromagnetic exchange coupling on a magnetic tunnel junction based molecular spintronics device.

This paper reports our Monte Carlo (MC) studies aiming to explain the experimentally observed paramagnetic molecule induced antiferromagnetic coupling between ferromagnetic (FM) electrodes. Recently developed magnetic tunnel junction based molecular spintronics devices (MTJMSDs) were prepared by chemically bonding the paramagnetic molecules between the FM electrodes along the tunnel junction's perimeter. These MTJMSDs exhibited molecule-induced strong antiferromagnetic coupling.

Catalytic action of gold and copper crystals in the growth of carbon nanotubes.

Multi-wall carbon nanotubes are grown in a chemical vapor deposition process by using bulk gold and copper substrates as catalysts. Nanotube growth starts from a nanometer-sized roughness on the metal surfaces and occurs in a mechanism where the catalyst particle is either at the tip (Au) or root (Cu) of the growing nanotube. Whereas Au leads to nanotubes with good structural perfection, nanotubes grown from Cu show a higher density of defects.

Quantitative analysis of parallel nanowire array assembly by dielectrophoresis.

We describe an assembly technique useful for generating ordered arrays of nanowires (NWs) between electrodes via dielectrophoresis (DEP) and an analysis technique useful for extracting quantitative information about the local electric fields and dielectrophoretic forces from video microscopy data. By tuning the magnitude of the applied electric fields such that the attractive forces on the NWs are of the same order of magnitude as the Brownian forces, and by taking advantage of the inter-NW repulsive forces during DEP, NWs can be assembled into parallel arrays with high reproducibility. By employing a particle-tracking code and analysis of NW motion, we demonstrate a method for quantitative mapping of the dielectrophoretic torques and NW-surface interactions as a function of position on the substrate, which allows a more complete understanding of the dynamics of the assembly and the ability to control these parameters for precise assembly.

FTIR spectroscopy of multiwalled carbon nanotubes: a simple approach to study the nitrogen doping.

The nitrogen doped multiwalled carbon nanotubes (MWNTs) were synthesized by microwave plasma chemical vapor deposition (MPCVD) technique. In this paper, we report the results of FTIR, Raman, and TGA studies to confirm the presence of N-doping inside carbon nanotubes. Fourier transform infrared (FTIR) studies were carried out in the range 400-4000 cm(-1) to study the attachment of nitrogen impurities on carbon nanotubes.

Molecular electrodes at the exposed edge of metal/insulator/metal trilayer structures.

Producing reliable electrical contacts of molecular dimensions has been a critical challenge in the field of molecule-based electronics. Conventional thin film deposition and photolithography techniques have been utilized to construct novel nanometer-sized electrodes on the exposed vertical plane on the edge of a thin film multilayer structure (metal/insulator/metal). Via thiol surface attachment to metal leads, an array of paramagnetic, cyanide-bridged octametal complexes, [(pzTp)FeIII(CN)3]4[NiII(L)]4[O3SCF3]4 (1) [(pzTp) = tetra(pyrazol-1-yl)borate; L = 1-S(acetyl)tris(pyrazolyl)decane], were covalently linked onto the electrodes forming a dominant conduction pathway.

Single crystalline nickel nanorods inside carbon nanotubes: growth behavior, structure, and magnetic properties.

Nickel nanorods with diameters ranging from 5 to 10 nm, encapsulated inside the carbon nanotubes, are prepared using microwave plasma chemical vapor deposition. High-resolution transmission electron microscopy (HRTEM) studies reveal the perfect crystalline nature of the rods with d-spacing closely matching the (111) interplanar spacing of Ni. The (111) planes of the Ni nanorods are always aligned at 39.

Ni and Ni/Pt filling inside multiwalled carbon nanotubes.

Multiwalled carbon nanotubes are grown by microwave plasma chemical vapor deposition with CH4 and H2 as precursor gases. Ni and Ni/Pt electroplated layers are used as catalysts for the synthesis of the tubes. We observe that a very efficient filling of the tubes takes place with Ni.