Steam quality monitoring as a strategy to reduce wet packs and sterilization failure.

Background: Hospital articles processed by steam are widely used in the Central Sterile Supply Department (CSSD), responsible for due sterilization. Steam sterilization is discussed worldwide, aiming to protect patients. If steam is outside the specified requirements, the sterilization process may fail, resulting in the wet packs at the end of the sterilization cycle.

Analysis of water quality over non-condensable gases concentration on steam used for sterilization.

Background: Non-condensable gases (NCGs) are all gases that do not undergo liquefaction during the saturated steam sterilization process. During a sterilization cycle, the NCGs presence inside the chamber is one of the biggest threats to the sterilization process compromising process validation and product quality.

Methods: In this work, 170 testing of NCGs concentrations performed between September 2016 and August 2021 were carried out by Orionce Serviços de Metrologia Ltda (Barueri, SP, Brazil), according to EN285:2015 procedure.

Steam Sterilization Chemical Indicators Are Not Adequate for Monitoring Real Steam Sterilization Cycles.

Chemical indicators are commonly used in hospitals to monitor steam sterilization conditions, indicating that medical devices are safe to be used. The results are stored for future evidence in the event of an infection incident root cause analysis. This type of indicator is also becoming an option for cycle monitoring in pharmaceutical steam sterilizers, improving cycle control.

The Effect of Brush Motion and Rinsing When Manually Cleaning Cannulated Medical Devices.

Cleaning cannulated medical devices can be challenging for perioperative and sterile processing department personnel. We performed a laboratory experimental study to evaluate differences in cleaning effectiveness using either a back-and-forth or helical spinning brushing motion and the effect of rinsing the bristles at each reintroduction of the brush in the lumen. We also tested the lumen cleanliness after high-pressure water cleansing without brushing.

Steam sterilization chemical indicators are not adequate for monitoring real steam sterilization cycles.

Chemical indicators are commonly used in hospitals to monitor steam sterilization conditions, indicating that medical devices are safe to be used. The results are stored for future evidence in the event of an infection incident root cause analysis. This type of indicator is also becoming an option for cycle monitoring in pharmaceutical steam sterilizers, improving cycle control.

False positive results of Bowie and Dick type test used for hospital steam sterilizer with slower come-up ramps: A case study.

Objective: To determine if the standardized B&D type test for hospital steam sterilizer is correctly indicating cycle failures in slower come-up ramps cycles.

Methods: Two commercially available B&D type test were challenged in a quality control sterilizer. A common failure was simulated in triplicate cycles, using a standardized cycle configuration, and then compared to triplicate cycles of a common cycle configuration.