Biomimetic and protective effects of bioactive toothpastes on eroded enamel surfaces.

This study aimed to evaluate the effectiveness of bioactive toothpastes in remineralizing eroded enamel surfaces in vitro. Bovine enamel blocks (n = 48) were obtained and classified into untreated, demineralized, and treated areas. Specimens were randomly classified into six groups (n = 8 each): fluoride-free toothpaste (NCT), Colgate Total 12 (PCT), Sensodyne Repair and Protect (SRP), Sensodyne Pronamel (SPE), Regenerador + Sensitive (RGS), and RGS/calcium booster (RCB).

Regenerative and Protective Effects on Dental Tissues of a Fluoride-Silicon-Rich Toothpaste Associated with a Calcium Booster: An Study.

Calcium boosters have been used as a supplement for fluoride toothpastes to repair the dental tissues and reduce dentin permeability. This in vitro study aimed to characterize the regenerative and protective effects of the treatment of dental tissues with a fluoride-silicon-rich toothpaste associated with a calcium booster. Bovine enamel and dentin blocks ( = 5) were obtained (4 × 4 × 6 mm).

Evaluating changes in the color and luminosity of dental enamel after orthodontic treatment: A clinical study.

The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC.

Effectiveness of fluoride-containing toothpastes associated with different technologies to remineralize enamel after pH cycling: an in vitro study.

Background: To evaluate the efficacy of fluoride-containing toothpastes with different technologies to remineralize artificial caries lesions in enamel.

Methods: Bovine enamel blocks were divided into three thirds: intact (untreated), demineralized (artificial caries lesion), and treated (caries lesion, pH cycling with dentifrices). Enamel blocks were randomly distributed into five groups (n = 12): Fluoride-free toothpaste, Colgate Oral Care (NC); Arginine-containing toothpaste, Colgate Total Daily Repair (PC); Silicate-based fluoride toothpaste: REFIX technology, regenerador + sensitive (RDC), NR-5 technology, Regenerate Enamel Science (RES), and NOVAMIN technology, Sensodyne Repair and Protect (SRP).

Effectiveness of Experimental Whitening Toothpastes Containing Colorants on the Optical Properties of Enamel.

Objective: This in vitro study investigated the whitening potential of experimental toothpastes containing optical colorants in their formulations in comparison with commercial products. The chemical and physical characteristics of the toothpastes, the morphology, and elemental analysis of the enamel surface after treatment were also analyzed.

Materials And Methods: One hundred twenty-five bovine incisor teeth were randomly divided into five groups according to the treatment: (i) experimental PHTALOX dental gel (PHT); (ii) experimental blue silica dental gel (SDG); (iii) Sensodyne Whitening Repair & Protect (WRP); (iv) Sensodyne True White (STW); (v) Snow White Toothpaste (SWS).

Modified Synthesis and Physicochemical Characterization of a Bioglass-Based Composite for Guided Bone Regeneration.

Objectives: Bioglass composites and polymers are materials of great interest for the medical and dental areas due to their properties, combining the bioactivity of ceramic materials and the mechanical properties of polymers. The purpose of the present study was to develop and to characterize the physicochemical and morphological properties an experimental bioglass-based ternary composite composed associated with sodium carboxymethylcellulose (Na-CMC) and polyvinyl alcohol (PVA). The compatibility of functional groups with bioglass was previously evaluated.

Bonding Reactions of Dental Self-Adhesive Cements with Synthetic Hydroxyapatite as a Function of the Polymerization Protocol.

Objectives: This study evaluated the influence of the cement composition and different polymerization protocols on the bonding chemical interaction of self-adhesive cements with synthetic hydroxyapatite.

Materials And Methods: Two commercial self-adhesive resin cements (RelyX U200 and Maxcem Elite) were selected, manipulated, mixed with hydroxyapatite dry powder (HAp), dispensed into molds, and distributed into three groups according to polymerization protocols: immediate photoactivation (IP); delayed photoactivation, 10 min self-curing and light-curing (DP); and chemical activation (CA, no light exposure). The detailed chemical information, at atomic scale, on the surface and deeper into the bulk of self-adhesive cement/hydroxyapatite mixtures was evaluated with X-ray photoelectron spectroscopy (XPS).

Enamel remineralization and surface roughness after treatment with herbal-containing toothpastes.

Background: Oral care products containing bioactive agents obtained from extracts of plant drugs were launched. This study investigated the effects of herbal-containing toothpastes associated or not with fluoride to remineralize the enamel after cariogenic challenge with pH cycling. The chemical and physical factors of toothpastes and the enamel surface roughness after brushing were also analyzed.

Biomimetic Mechanism of Action of Fluoridated Toothpaste Containing Proprietary REFIX Technology on the Remineralization and Repair of Demineralized Dental Tissues: An In Vitro Study.

Objectives:  This study aimed to characterize the mineral content and surface and cross-sectional morphology of enamel and dentin tissues treated with a 1450 ppm fluoride-containing toothpaste with REFIX technology.

Materials And Methods:  Bovine enamel blocks ( = 5) were obtained (4 × 4 × 6 mm), demineralized (artificial caries lesion), and treated (pH cycling and brushing with the toothpaste). During the pH cycling, which lasted for 7 days (demineralization and remineralization took 6 and 18 hours, respectively), the enamel was brushed for 5 minutes using an electric toothbrush before being immersed in a remineralizing solution.

The interaction of sodium trimetaphosphate with collagen I induces conformational change and mineralization that prevents collagenase proteolytic attack.

Objectives: This study evaluated the cell viability and expression of different major genes involved in mineralization in odontoblast-like cells exposed to sodium trimetaphosphate (STMP). It was also investigated the influence of STMP on the rate of calcium phosphate crystal growth, its anti-proteolytic action against the enzymatic degradation of type I collagen, the binding mechanism of STMP to collagen fibrils, and the potential mechanism to induce collagen stabilization.

Methods: Immortalized rat odontoblast MDPC-23 cells were cultured.

Effects of 1450-ppm Fluoride-containing Toothpastes Associated with Boosters on the Enamel Remineralization and Surface Roughness after Cariogenic Challenge.

Objectives:  This study investigated the remineralization potential of 1450 ppm, fluoride-containing toothpastes containing different active remineralization agents after cariogenic challenge with pH cycling. The enamel surface roughness after brushing and the chemical and physical characteristics of the toothpastes tested were also analyzed.

Materials And Methods:  Fifty-six bovine enamel blocks were obtained (4 × 4 × 6 mm) and divided into three thirds: intact (untreated), demineralized (artificial caries lesion), and treated (caries lesion, pH cycling, and brushing with dentifrices).

Evidence-Based Studies and Perspectives of the Use of Brazilian Green and Red Propolis in Dentistry.

This review analyzes the evidence and perspectives of dental use of the green and red propolis produced in Brazil by L. Multiple applications of propolis were found considering its antibacterial, antifungal, anti-inflammatory, immunomodulatory, antiviral, and healing properties. Its therapeutic effects are mainly due to the presence of alcohols, aldehydes, aliphatic acids, aliphatic esters, amino acids, aromatic acids, aromatic esters, flavonoids, hydrocarbyl esters, ethers, fatty acids, ketones, terpenes, steroids, and sugars.

Oxidative stress induced by self-adhesive resin cements affects gene expression, cellular proliferation and mineralization potential of the MDPC-23 odontoblast-like cells.

Objective: Clinical issues have been raised about problems related to cytotoxic effects caused when applying self-adhesive cement. It was hypothesized that byproducts eluted from self-adhesive cements modulate oxidative stress response, the gene expression of signaling pathways of inflammatory process/transcriptional activators, and the expression and activity of interstitial collagenases, and modify the phenotypic characteristics of cellular proliferation and mineral deposition in odontoblastic-like cells.

Methods: Cements (MaxCem Elite [MAX] and RelyX U200 [U200)]) were mixed, dispensed into moulds, and photoactivated according to the manufacturers' instructions.

Differential cytotoxic effects on odontoblastic cells induced by self-adhesive resin cements as a function of the activation protocol.

Objectives: To evaluate the cytotoxic effects of exposing odontoblast cells to a variety of commercial self-adhesive cements polymerized using different activation modes.

Methods: Five cements: MaxCem Elite (MAX), Bifix SE (BSE), G-Cem LinkAce (GCE), Clearfil SA Luting (CAS), and RelyX U200 (U200) were mixed, dispensed into molds, and distributed in groups, according to polymerization protocols: immediate photoactivation; delayed photoactivation (10min self-curing plus light-activation); and chemical activation (no light exposure). Immortalized rat odontoblast cells (MDPC-23) were cultured.

Caries progression in non-cavitated fissures after infiltrant application: a 3-year follow-up of a randomized controlled clinical trial.

Objectives: To evaluate the efficacy of a conservative treatment to prevent the progression of caries using an infiltrant on non-cavitated pit and fissures.

Material And Methods: This controlled clinical trial selected 23 volunteers with clinically and radiographically non-cavitated occlusal caries among patients presenting a "rather low" to "very high" caries risk. Eighty-six teeth were randomly divided into two experimental groups: teeth receiving a commercial pit-and-fissure sealant (Alpha Seal-DFL) and contralateral teeth receiving Icon infiltrant (DMG).

Comparative bonding ability to dentin of a universal adhesive system and monomer conversion as functions of extended light curing times and storage.

Objectives: The purpose of this in vitro study was to evaluate the bonding ability and monomer conversion of a universal adhesive system applied to dentin as functions of different curing times and storage. The results were compared among a variety of commercial adhesives.

Materials And Methods: Flat superficial dentin surfaces were exposed on human molars and assigned into one of the following adhesives (n = 15): total-etch Adper Single Bond 2 (SB) and Optibond Solo Plus (OS), self-etch Optibond All in One (OA) and Clearfil SE Bond (CSE), and Scotchbond Universal Adhesive in self-etch mode (SU).

Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B.

Objective: This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system.

Material And Methods: The adhesives Adper Scotchbond Multi-Purpose (MP) and Clearfil SE Bond (SE) were mixed with 0.1 mg/mL of RB.

Effects of age condition on the distribution and integrity of inorganic fillers in dental resin composites.

Objectives: The aim of this study is to evaluate the distribution of the filler size along with the zeta potential, and the integrity of silane-bonded filler surface in different types of restorative dental composites as a function of the material age condition.

Materials And Methods: Filtek P60 (hybrid composite), Filtek Z250 (small-particle filled composite), Filtek Z350XT (nanofilled composite), and Filtek Silorane (silorane composite) (3M ESPE) were tested at different stage condition (i.e.

Polymerization kinetics and polymerization stress in resin composites after accelerated aging as a function of the expiration date.

Objectives: To determine the effect of material condition (new, aged, and expired) on the polymerization kinetics and polymerization stress of different classifications of dental composites.

Materials And Methods: Specimens were obtained according to the following factors: Composites: (3M ESPE) Filtek P60, Filtek Z250, Filtek Z350XT, and Filtek Silorane; and Material conditions: new, aged, and expired. The syringe composites underwent an accelerated aging protocol (Arrhenius model) representing approximately 9 months of aging.

The effect of polymerization mode on monomer conversion, free radical entrapment, and interaction with hydroxyapatite of commercial self-adhesive cements.

Objectives: This study evaluated the degree of conversion, the free radical entrapment, and the chemical interaction of self-adhesive resin cements mixed with pure hydroxyapatite, as a function of the polymerization activation mode among a variety of commercial self-adhesive cements.

Materials And Methods: Four cements (Embrace WetBond, MaxCem Elite, Bifix SE, and RelyX U200) were mixed, combined with hydroxyapatite, dispensed into molds, and distributed into three groups, according to polymerization protocols: IP (photoactivation for 40s); DP (delayed photoactivation, 10 min self-curing plus 40s light-activated); and CA (chemical activation, no light exposure). Infrared (IR) spectra were obtained and monomer conversion (%) was calculated by comparing the aliphatic-to-aromatic IR absorption peak ratio before and after polymerization (n=10).

Effects of solvent evaporation on water sorption/solubility and nanoleakage of adhesive systems.

Objective: To evaluate the influence of solvent evaporation in the kinetics of water diffusion (water sorption-WS, solubility-SL, and net water uptake) and nanoleakage of adhesive systems.

Material And Methods: Disk-shaped specimens (5.0 mm in diameter x 0.