Effectiveness of Toothpaste Containing REFIX Technology against Dentin Hypersensitivity: A Randomized Clinical Study.

Aim: This clinical study aimed to evaluate the efficacy of a toothpaste containing a proprietary REFIX technology (Regenerador + Sensitive DentalClean, Rabbit Corp) against dentin hypersensitivity.

Materials And Methods: Fifty-three volunteers who fulfilled the inclusion criteria and signed the consent form were included. They were examined for dentin hypersensitivity.

Effect of two processing techniques used to manufacture lithium disilicate ceramics on the degree of conversion and microshear bond strength of resin cement.

The aim of the current study was to compare the effect of two lithium disilicate ceramic processing techniques (pressing and CAD/CAM) on the degree of conversion of resin cement when it is photoactivated and the microshear bond strength of resin cement to ceramics. Two ceramic discs were manufactured: one by the Press technique and another by CAD/CAM technique. Five Variolink Veneer resin cement samples were photoactivated through each ceramic disc and subjected to attenuated total reflectance Fourier transform infrared spectroscopy to evaluate their degree of conversion.

Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B.

Objective: This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system.

Material And Methods: The adhesives Adper Scotchbond Multi-Purpose (MP) and Clearfil SE Bond (SE) were mixed with 0.1 mg/mL of RB.

Effects of age condition on the distribution and integrity of inorganic fillers in dental resin composites.

Objectives: The aim of this study is to evaluate the distribution of the filler size along with the zeta potential, and the integrity of silane-bonded filler surface in different types of restorative dental composites as a function of the material age condition.

Materials And Methods: Filtek P60 (hybrid composite), Filtek Z250 (small-particle filled composite), Filtek Z350XT (nanofilled composite), and Filtek Silorane (silorane composite) (3M ESPE) were tested at different stage condition (i.e.

Polymerization kinetics and polymerization stress in resin composites after accelerated aging as a function of the expiration date.

Objectives: To determine the effect of material condition (new, aged, and expired) on the polymerization kinetics and polymerization stress of different classifications of dental composites.

Materials And Methods: Specimens were obtained according to the following factors: Composites: (3M ESPE) Filtek P60, Filtek Z250, Filtek Z350XT, and Filtek Silorane; and Material conditions: new, aged, and expired. The syringe composites underwent an accelerated aging protocol (Arrhenius model) representing approximately 9 months of aging.

The effect of polymerization mode on monomer conversion, free radical entrapment, and interaction with hydroxyapatite of commercial self-adhesive cements.

Objectives: This study evaluated the degree of conversion, the free radical entrapment, and the chemical interaction of self-adhesive resin cements mixed with pure hydroxyapatite, as a function of the polymerization activation mode among a variety of commercial self-adhesive cements.

Materials And Methods: Four cements (Embrace WetBond, MaxCem Elite, Bifix SE, and RelyX U200) were mixed, combined with hydroxyapatite, dispensed into molds, and distributed into three groups, according to polymerization protocols: IP (photoactivation for 40s); DP (delayed photoactivation, 10 min self-curing plus 40s light-activated); and CA (chemical activation, no light exposure). Infrared (IR) spectra were obtained and monomer conversion (%) was calculated by comparing the aliphatic-to-aromatic IR absorption peak ratio before and after polymerization (n=10).

Effects of solvent evaporation on water sorption/solubility and nanoleakage of adhesive systems.

Objective: To evaluate the influence of solvent evaporation in the kinetics of water diffusion (water sorption-WS, solubility-SL, and net water uptake) and nanoleakage of adhesive systems.

Material And Methods: Disk-shaped specimens (5.0 mm in diameter x 0.

Mechanical properties of composites as functions of the syringe storage temperature and energy dose.

Objective: To investigate the mechanical properties of different classifications of composites indicated for posterior application as functions of the storage condition and of the energy dose.

Material And Methods: Specimens (8 x 2 x 2 mm) were obtained according to the factors: I) Composites (3M ESPE): Filtek P60, Filtek Z350XT, and Filtek Silorane; II) Syringe storage conditions: room temperature, aged, oven, refrigerator, and freezer; and III) Energy dose: 24 J/cm(2) and 48 J/cm(2). After photoactivation, the specimens were stored at 37 ºC for 24 h.

Micro-sized erosions in a nanofilled composite after repeated acidic beverage exposures: consequences of clusters dislodgments.

Objective: To evaluate the hardness (KHN), color stability (DE), and superficial micromorphology of two categories of composites after immersion in either distilled water or grape juice for up to 45 days.

Material And Methods: Cylindrical specimens (6 mm diameter x 2 mm thick) were obtained according to the factors: composite [Opallis (FGM) and Filtek Z350XT (3M ESPE)]; immersion solution (distilled water and grape juice); and evaluation time: 24 h and 7, 14, 21, 28, and 45 days. After photoactivation, the specimens were stored at 37 ºC for 24 h.

Free radical entrapment and crystallinity of resin composites after accelerated aging as a function of the expiration date.

This study evaluated the spin concentration and the crystallinity in different classifications of dental composites as a function of the material condition (new, aged and expired). Specimens were obtained according to the factors: composites: Filtek P60, Filtek Z250, Filtek Z350XT, and Filtek Silorane; and material conditions: new, aged, and expired. The syringe composites underwent an accelerated aging protocol (Arrhenius model).

Resin composite characterizations following a simplified protocol of accelerated aging as a function of the expiration date.

This study evaluated the mechanical, thermal, and morphological characteristics of different classifications of dental composites as a function of the material condition (new, aged and expired). Specimens were obtained according to these factors: Composites: Filtek P60, Filtek Z250, Filtek Z350XT, and Filtek Silorane; and Material conditions: new, aged, and expired. The syringe composites underwent an accelerated aging protocol (Arrhenius model).

Compatibility between silorane adhesive and simplified methacrylate-based adhesive systems.

The purpose of this study was to evaluate the impact of replacing P90 primer with simplified adhesive systems (with a conventional, two-step adhesive or a self-etching, one-step adhesive) on bond strength to dentin in Class I restorations. The interfaces were also analyzed using confocal microscopy by adding a fluorophore to the adhesive components and SEM using silver nitrate for nanoleakage investigation. X-ray diffraction (XRD) characterized the chemical interaction of the adhesives.

Thermo-mechanical degradation of composite restoration photoactivated by modulated methods-a SEM study of marginal and internal gap formation.

Objective: To evaluate the influence of thermal-mechanical degradation on superficial and internal gap formation of composite restorations photoactivated using modulated methods.

Materials And Methods: An experimental composite was prepared using a resin matrix containing 65wt% Bis-GMA and 35wt% TEGDMA. Camphorquinone (0.

Hydrolytic degradation of silorane- and methacrylate-based composite restorations: Evaluation of push-out strength and marginal adaptation.

This study compared the hydrolytic degradation of composite restorations based on methacrylate and silorane systems regarding bond strength and marginal adaptation. Materials and methods. Sixty bovine incisors were ground flat to obtain a 2-mm thick slice in which conical preparations were made.

Effects of curing protocols on fluid kinetics and hardness of resin cements.

The effects of polymerization protocols on water sorption/solubility, the diffusion coefficient (D), the flux (J), and the hardness (KH) of two resin cements were evaluated. The materials were manipulated and divided into three groups (n=6) according to the curing protocol: PA=photoactivation (40 s); DP=delayed photoactivation (10 min self-curing plus 40 s photoactivated); CA=chemical activation. After desiccation, the specimens were weighed, stored in water (37ºC), evaluated over 28-days, and hardness recorded.

Esthetic and functional rehabilitation of crowded mandibular anterior teeth using ceramic veneers: a case report.

The use of ceramic veneers to restore crowded teeth in the maxilla has been widely discussed in the literature. However, the use of this technique in the mandible has received little attention. Therefore, this case report describes the treatment of crowded mandibular anterior teeth using ceramic veneers.

Bonding to dentin as a function of air-stream temperatures for solvent evaporation.

This study evaluated the influence of solvent evaporation conditions of acid-etching adhesives. The medium dentin of thirty extracted human third molars was exposed and bonded to different types of etch-and-rinse adhesives: 1) Scotchbond Multi-Purpose (SBMP) ; water-based; 2) Adper Single Bond 2 (SB) ; ethanol/water-based, and 3) Prime & Bond 2.1 (PB) ; acetone-based.

Interfacial integrity of bonded restorations with self-etching adhesives: Water storage and thermo-mechanical cycling.

Objective: To evaluate the effect of thermo-mechanical cycling (TMC) on the microleakage (μL) and axial gap width (AG) of Class V bonded restorations in premolars using self-etching adhesive systems. The bond strength of composite restorations to dentin (μTBS) using the same adhesives was also evaluated in third molars after water storage: 24 h and 6 months. The research hypotheses were tested for the results of two self-etching adhesives in comparison when a conventional two-step adhesive was used: (1) the μL and AG would be lower, regardless of TMC; (2) the μTBS of self-etching adhesives would be higher, irrespective of evaluation times.

Hardness, polymerization depth, and internal adaptation of Class II silorane composite restorations as a function of polymerization protocol.

Objectives: To evaluate the influence of various photoactivation techniques on the internal gap, Knoop-hardness, and polymerization depth of silorane- and methacrylate-based composites in Class II restorations.

Methods: Preparations were made in third molars (n = 10), according to composites (Filtek P60: methacrylate; Filtek P90: silorane) and photoactivation techniques (OC: occlusal photoactivation (control); OBL: occlusal+buccal+lingual photoactivation; and BLO: buccal+lingual+occlusal photoactivation (transdental)). Composites were inserted in two increments, both individually photoactivated for 20s.

Effectiveness of immediate bonding of etch-and-rinse adhesives to simplified ethanol-saturated dentin.

This study examined the immediate bond strength of etch-and-rinse adhesives to demineralized dentin saturated with either water or absolute ethanol. The research hypothesis was that there would be no difference in bond strength to dentin between water or ethanol wet-bonding techniques. The medium dentin of 20 third molars was exposed (n = 5).

Fracture resistance of teeth restored with different resin-based restorative systems.

The aim of the present study was to evaluate the fracture resistance of teeth restored with resin composite. Forty-eight maxillary premolar teeth were chosen and randomly divided to six groups: G1 (control): sound teeth; G2: MOD preparation, unrestored; G3: MOD + Adper Single Bond 2/P60; G4: MOD + Adper Easy One/P60; G5: MOD + P90 restorative system; G6: MOD + Adper Easy One/P90 Bond/P90. Specimens were subjected to compressive axial loading (0.

Prevalence of enamel defects in permanent teeth of patients with complete cleft lip and palate.

Objective : To evaluate the prevalence, types, location, and characteristics of enamel defects in anterior permanent teeth of patients with complete unilateral and bilateral cleft lip and palate, as well as the relation with the cleft. Setting : Hospital for Rehabilitation of Craniofacial Anomalies, Bauru, São Paulo, Brazil. Participants : Eighty patients of both genders, 12 years and older, with unilateral or bilateral cleft lip and palate.

Bond strength and interfacial micromorphology of etch-and-rinse and self-adhesive resin cements to dentin.

Purpose: To evaluate the microtensile bond strength and interfacial micromorphology of indirect composite restorations to dentin using three commercial resin cements after 24 hours and 30 days of water storage.

Materials And Methods: The medium dentin of third human molars was exposed (N = 30, n = 10 per group). Three commercial resin cements were used to cement indirect resin composite restorations to dentin: the auto-cured C&B Cement/All Bond 2, the dual-cured RelyX ARC/Adper Single Bond 2, and the self-adhesive dual-cured RelyX Unicem.