Sustained Intra-Articular Release and Biocompatibility of Tacrolimus (FK506) Loaded Monospheres Composed of [PDLA-PEG]--[PLLA] Multi-Block Copolymers in Healthy Horse Joints.

There is an increasing interest in controlled release systems for local therapy in the treatment of human and equine joint diseases, aiming for optimal intra-articular concentrations with no systemic side effects. In this study, the intra-articular tolerability and suitability for local and sustained release of tacrolimus (FK506) from monospheres composed of [PDLA-PEG]--PLLA multiblock copolymers were investigated. Unloaded and tacrolimus-loaded (18.

In vivo pharmacokinetics of celecoxib loaded endcapped PCLA-PEG-PCLA thermogels in rats after subcutaneous administration.

Injectable thermogels based on poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) containing an acetyl- or propyl endcap and loaded with celecoxib were developed for local drug release. The aim of this study was to determine the effects of the composition of the celecoxib/PCLA-PEG-PCLA formulation on their in vivo drug release characteristics. Furthermore, we want to obtain insight into the in vitro-in vivo correlation.

Sustained intra-articular release of celecoxib from in situ forming gels made of acetyl-capped PCLA-PEG-PCLA triblock copolymers in horses.

In this study, the intra-articular tolerability and suitability for local and sustained release of an in situ forming gel composed of an acetyl-capped poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) copolymer loaded with celecoxib was investigated in horse joints. The systems were loaded with two dosages of celecoxib, 50 mg/g ('low CLB gel') and 260 mg/g ('high CLB gel'). Subsequently, they were injected into the joints of five healthy horses.

Release behavior and intra-articular biocompatibility of celecoxib-loaded acetyl-capped PCLA-PEG-PCLA thermogels.

In this study, we investigated the in vitro and in vivo properties and performance of a celecoxib-loaded hydrogel based on a fully acetyl-capped PCLA-PEG-PCLA triblock copolymer. Blends of different compositions of celocoxib, a drug used for pain management in osteoarthritis, and the acetyl-capped PCLA-PEG-PCLA triblock copolymer were mixed with buffer to yield temperature-responsive gelling systems. These systems containing up to 50 mg celecoxib/g gel, were sols at room temperature and converted into immobile gels at 37 °C.

Systems toxicology approach to understand the kinetics of benzo(a)pyrene uptake, biotransformation, and DNA adduct formation in a liver cell model.

Cell-based models are important for deriving mechanistic information about stress response pathways that have evolved to protect cells from toxic insult, such as exposure to environmental pollutants. One determinant of the stress response is the amount of chemical entering the cell and the cell's ability to detoxify and remove the chemical. If the stress response is overwhelmed, an adverse outcome will ensue.

Improved efficacy of acylfulvene in colon cancer cells when combined with a nuclear excision repair inhibitor.

The efficacy of DNA-damaging anticancer drugs is highly influenced by cellular DNA repair capacity, and by inhibiting the relevant DNA repair pathway, efficacy of alkylating agents may be increased. Therefore, combining DNA repair inhibitors with anticancer agents that selectively target tumor tissue should improve cancer treatment. The objective of this study was to test the hypothesis that cotreatment of cancer cells with acylfulvene (AF, alkylating agent) and UCN-01 (DNA repair inhibitor) would improve drug efficacy and promote the persistence of DNA adducts.

Quantification of acylfulvene- and illudin S-DNA adducts in cells with variable bioactivation capacities.

Illudin S and its semisynthetic analogue acylfulvene (AF) are structurally similar but elicit different biological responses. AF is a bioreductive alkylating anticancer agent with a favorable therapeutic index, while illudin S is in general highly toxic. AF toxicity is dependent on the reductase enzyme prostaglandin reductase 1 (PTGR1) for activation to a cytotoxic reactive intermediate.

Effects of cryoprotectant addition and washout methods on the viability of precision-cut liver slices.

Successful vitrification of organ slices is hampered by both osmotic stress and chemical toxicity of cryoprotective agents (CPAs). In the present study, we focused on the effect of osmotic stress on the viability of precision-cut liver slices (PCLS) by comparing different CPA solutions and different methods of loading and unloading the slices with the CPAs. For this purpose, we developed a gradient method to load and unload CPAs with the intention of minimizing sudden changes in osmolarity and thereby avoiding osmotic stress in the slices in comparison with the commonly used step-wise loading/unloading approach.

Comparison of biocompatibility and adsorption properties of different plastics for advanced microfluidic cell and tissue culture models.

Microfluidic technology is providing new routes toward advanced cell and tissue culture models to better understand human biology and disease. Many advanced devices have been made from poly(dimethylsiloxane) (PDMS) to enable experiments, for example, to study drug metabolism by use of precision-cut liver slices, that are not possible with conventional systems. However, PDMS, a silicone rubber material, is very hydrophobic and tends to exhibit significant adsorption and absorption of hydrophobic drugs and their metabolites.

Microfluidics enables small-scale tissue-based drug metabolism studies with scarce human tissue.

Early information on the metabolism and toxicity properties of new drug candidates is crucial for selecting the right candidates for further development. Preclinical trials rely on cell-based in vitro tests and animal studies to characterize the in vivo behavior of drug candidates, although neither are ideal predictors of drug behavior in humans. Improving in vitro systems for preclinical studies both from a technological and biological model standpoint thus remains a major challenge.

Microfluidic devices for in vitro studies on liver drug metabolism and toxicity.

Microfluidic technologies enable the fabrication of advanced in vitro systems incorporating liver tissue or cells to perform metabolism and toxicity studies for drugs and other xenobiotics. The use of microfluidics provides the possibility to utilize a flow of medium, thereby creating a well-controlled microenvironment. The general goals of most in vitro systems in drug research are to optimally mimic the in vivo situation, and to minimize the number of animals required for preclinical studies.

Hydrogel embedding of precision-cut liver slices in a microfluidic device improves drug metabolic activity.

A microfluidic-based biochip made of poly-(dimethylsiloxane) was recently reported for the first time by us for the incubation of precision-cut liver slices (PCLS). In this system, PCLS are continuously exposed to flow, to keep the incubation environment stable over time. Slice behavior in the biochip was compared with that of slices incubated in well plates, and verified for 24 h.

On-line HPLC analysis system for metabolism and inhibition studies in precision-cut liver slices.

A novel approach for on-line monitoring of drug metabolism in continuously perifused, precision-cut liver slices (PCLS) in a microfluidic system has been developed using high-performance liquid chromatography with UV detection (HPLC-UV). In this approach, PCLS are incubated in a microfluidic device made of poly(dimethylsiloxane) (PDMS) by continuous, single-pass perifusion with fresh medium. Two syringe pumps are incorporated into the system to infuse substrates or inhibitors at varying concentrations into the perfusion medium just before the chip entrance.

A microfluidic approach for in vitro assessment of interorgan interactions in drug metabolism using intestinal and liver slices.

Over the past two decades, it has become increasingly clear that the intestine, in addition to the liver, plays an important role in the metabolism of xenobiotics. Previously, we developed a microfluidic-based in vitro system for the perifusion of precision-cut liver slices for metabolism studies. In the present study, the applicability of this system for the perifusion of precision-cut intestinal slices, and for the sequential perifusion of intestinal and liver slices, all from rat, was tested to mimic the in vivo first pass situation.

Microfluidic biochip for the perifusion of precision-cut rat liver slices for metabolism and toxicology studies.

Early detection of kinetic, metabolic, and toxicity (ADME-Tox) profiles for new drug candidates is of crucial importance during drug development. This article describes a novel in vitro system for the incubation of precision-cut liver slices (PCLS) under flow conditions, based on a poly(dimethylsiloxane) (PDMS) device containing 25-microL microchambers for integration of the slices. The microdevice is coupled to a perifusion system, which enables a constant delivery of nutrients and oxygen and a continuous removal of waste products.

Improvement of recovery and repeatability in liquid chromatography-mass spectrometry analysis of peptides.

Poor repeatability of peak areas is a problem frequently encountered in peptide analysis with nanoLiquid Chromatography coupled on-line with Mass Spectrometry (nanoLC-MS). As a result, quantitative analysis will be seriously hampered unless the observed variability can be corrected in some way. Currently, labeling techniques or addition of internal standards are often applied for this purpose.