Improving stormwater infiltration and retention in compacted urban soils at impervious/pervious surface disconnections with biochar.

Urban development often results in compacted soils, impairing soil structure and reducing the infiltration and retention of stormwater runoff from impervious features. Biochar is a promising organic soil amendment to improve infiltration and retention of stormwater runoff. Soil at the disconnection between impervious and pervious surfaces represents a critical biochar application point for stormwater management from urban impervious features.

Understanding a wood-derived biochar's impact on stormwater quality, plant growth, and survivability in bioretention soil mixtures.

Bioretention systems are planted media filters used in stormwater infrastructure. Maintaining plant growth and survival is challenging because most designs require significant sand. Conventional bioretention soil media (BSM) might be augmented with biochar to make the BSM more favorable to plants, to improve nutrient removal efficiency, and enhance plant survivability during drought while replacing compost/mulch components that have been linked to excess nutrient export.

Impact of wood-derived biochar on the hydrologic performance of bioretention media: Effects on aggregation, root growth, and water retention.

Bioretention systems are one example of green stormwater infrastructure that may mitigate the hydrologic impact of stormwater runoff. To improve water retention while maintaining rapid stormwater infiltration, conventional bioretention soil media (BSM) might be augmented with biochar. Biochar may improve the BSM's structure by increasing soil aggregation, which might improve water retention and increase stormwater infiltration while also improving root growth.

Ferrocyanide enhanced evaporative flux to remediate soils contaminated with produced water brine.

Accidental releases of highly saline produced water (PW) to land can impact soil quality. The release of associated salts can clog soil pores, disperse soil clays, and inhibit plants and other soil biota. This study explores a novel remediation technique using ferrocyanide to enhance the evaporative flux of soil porewater to transport dissolved salts to the soil surface, where crystallization then occurs.

Diurnal landfill methane flux patterns across different seasons at a landfill in Southeastern US.

Diurnal patterns of methane flux are examined at a landfill in the Southeastern US. Methane fluxes are measured by an eddy covariance (EC) tower during representative one-week periods in three seasons: summer, fall, and winter. Measured methane fluxes are compared with atmospheric pressure, temporal variation of atmospheric pressure, wind shear velocity, and air temperature.

Preparing and characterizing repacked columns for experiments in biochar-amended soils.

Laboratory soil column experiments have been frequently performed for investigating various soil-related processes. In recent years, the demand for using biochar as a soil amendment for environmental and agricultural purposes has increased significantly. To assess the beneficial impacts of biochar, laboratory column experiments may be conducted using repacked biochar-amended soil before large-scale biochar application.

Predicting the impact of biochar on the saturated hydraulic conductivity of natural and engineered media.

If biochar is applied to soil or stormwater treatment media, the saturated hydraulic conductivity (K) may be altered, which is a critical property affecting media performance. While a significant number of studies document biochar's effect on a porous medium's K, predictive models are lacking. Herein models are advanced for predicting K for repacked natural soil and engineered media when amended with biochar of various particle sizes and application rates.

Spatial heterogeneity of biochar (segregation) in biochar-amended media: An overlooked phenomenon, and its impact on saturated hydraulic conductivity.

While the use of biochar as a soil amendment is gaining popularity for environmental and agricultural purposes, spatial heterogeneity of biochar (segregation) in biochar-amended media and its underlying causes have been overlooked. In this study, for the first time particle segregation in biochar-amended media and its impact on the media's saturated hydraulic conductivity (K) were investigated. Two uniformly graded media were amended with different sizes of a wood-based biochar under dry and wet conditions.

Drying of fecal sludge in 3D laminate enclosures for urban waste management.

Laminated hydrophobic membranes have been proposed as liners for container-based sanitation systems in developing countries. The laminate allows drying of fecal sludge, which might significantly reduce the frequency of container emptying, while containing liquids and solids. While previous laboratory tests demonstrated rapid drying of fecal sludge or water retained in laminates, experiments did not assess the effects of system dimension or scale on performance.

Quantifying biochar content in a field soil with varying organic matter content using a two-temperature loss on ignition method.

While the use of biochar as a soil amendment for agronomic and environmental management is gaining popularity, quantification of biochar in soil is still challenging. The objective of this work was to develop a fast, simple and inexpensive method to quantify biochar content in field soil with varying organic matter content - the two-temperature loss on ignition (LOI) method. In this approach, biochar mass fraction in a biochar-amended soil is computed by measuring the dry mass of biochar/soil mixture after heating sequentially at two temperatures: low temperature (LT), and high temperature (HT).

A pilot-scale, bi-layer bioretention system with biochar and zero-valent iron for enhanced nitrate removal from stormwater.

Nitrogen (N) removal in conventional bioretention systems is highly variable owing to the low nitrate (NO) elimination efficiency. We hypothesized that amending bioretention cells with biochar and zero-valent iron (ZVI) could improve the NO removal performance. A well-instrumented, bi-layer pilot-scale bioretention cell was developed to test the hypothesis by investigating its hydrologic performance and NO removal efficacy as affected by biochar and ZVI amendments.

Assessing clogging of laminated hydrophobic membrane during fecal sludge drying.

A new sanitation technology has been proposed in which a laminated hydrophobic membrane contains and enhances drying of fecal sludge in a toilet, with particular focus on application to urban regions of low-income countries. The proposed technology uses a laminated hydrophobic membrane liner as an integral component of container-based sanitation systems. The focus of this study is to quantitatively evaluate the laminate's clogging after repeated use, which will affect replacement interval and might limit the laminate's application in container-based toilets.

Atmospheric modeling to assess wind dependence in tracer dilution method measurements of landfill methane emissions.

The short-term temporal variability of landfill methane emissions is not well understood due to uncertainty in measurement methods. Significant variability is seen over short-term measurement campaigns with the tracer dilution method (TDM), but this variability may be due in part to measurement error rather than fluctuations in the actual landfill emissions. In this study, landfill methane emissions and TDM-measured emissions are simulated over a real landfill in Delaware, USA using the Weather Research and Forecasting model (WRF) for two emissions scenarios.

Modeling biosolids drying through a laminated hydrophobic membrane.

The adaptation of the membrane distillation process as a low-cost and sustainable approach to biosolids drying and stabilization is investigated, which may have application in container-based sanitation systems proposed in low-income urban regions. Three-layer laminated, breathable, hydrophobic membranes enclose the biosolids, facilitating drying but preventing transport of contaminants. The membranes used in this process are non-wetting with pore spaces that only allow vapor transport.

Numerical simulations to assess the tracer dilution method for measurement of landfill methane emissions.

Landfills are a significant contributor to anthropogenic methane emissions, but measuring these emissions can be challenging. This work uses numerical simulations to assess the accuracy of the tracer dilution method, which is used to estimate landfill emissions. Atmospheric dispersion simulations with the Weather Research and Forecast model (WRF) are run over Sandtown Landfill in Delaware, USA, using observation data to validate the meteorological model output.

Nutrient release and ammonium sorption by poultry litter and wood biochars in stormwater treatment.

The feasibility of using biochar as a filter medium in stormwater treatment facilities was evaluated with a focus on ammonium retention. Successive batch extractions and batch ammonium sorption experiments were conducted in both deionized (DI) water and artificial stormwater using poultry litter (PL) and hardwood (HW) biochars pyrolyzed at 400°C and 500°C. No measureable nitrogen leached from HW biochars except 0.

Short-term landfill methane emissions dependency on wind.

Short-term (2-10h) variations of whole-landfill methane emissions have been observed in recent field studies using the tracer dilution method for emissions measurement. To investigate the cause of these variations, the tracer dilution method is applied using 1-min emissions measurements at Sandtown Landfill (Delaware, USA) for a 2-h measurement period. An atmospheric dispersion model is developed for this field test site, which is the first application of such modeling to evaluate atmospheric effects on gas plume transport from landfills.

Phosphorus release behaviors of poultry litter biochar as a soil amendment.

Phosphorus (P) may be immobilized and consequently the runoff loss risks be reduced if poultry litter (PL) is converted into biochar prior to land application. Laboratory studies were conducted to examine the water extractability of P in PL biochar and its release kinetics in amended soils. Raw PL and its biochar produced through 400°C pyrolysis were extracted with deionized water under various programs and measured for water extractable P species and contents.

Assessing methods to estimate emissions of non-methane organic compounds from landfills.

The non-methane organic compound (NMOC) emission rate is used to assess compliance with landfill gas emission regulations by the United States Environmental Protection Agency (USEPA). A recent USEPA Report (EPA/600/R-11/033) employed a ratio method to estimate speciated NMOC emissions (i.e.

Model evaluation of denitrification under rapid infiltration basin systems.

Rapid Infiltration Basin Systems (RIBS) are used for disposing reclaimed wastewater into soil to achieve additional treatment before it recharges groundwater. Effluent from most new sequenced batch reactor wastewater treatment plants is completely nitrified, and denitrification (DNF) is the main reaction for N removal. To characterize effects of complex surface and subsurface flow patterns caused by non-uniform flooding on DNF, a coupled overland flow-vadose zone model is implemented in the multiphase flow and reactive transport simulator TOUGHREACT.

Photoacoustic infrared spectroscopy for conducting gas tracer tests and measuring water saturations in landfills.

Gas tracer tests can be used to determine gas flow patterns within landfills, quantify volatile contaminant residence time, and measure water within refuse. While gas chromatography (GC) has been traditionally used to analyze gas tracers in refuse, photoacoustic spectroscopy (PAS) might allow real-time measurements with reduced personnel costs and greater mobility and ease of use. Laboratory and field experiments were conducted to evaluate the efficacy of PAS for conducting gas tracer tests in landfills.

Measuring fluid flow properties of waste and assessing alternative conceptual models of pore structure.

Laboratory procedures were developed to obtain constitutive relations for fluid flow in refuse. Five different types of experiments were conducted for the same waste sample: a drainage experiment, multi step outflow experiment, total porosity measurement, saturated hydraulic conductivity test, and gas permeability tests. To investigate fundamental processes affecting water movement and moisture retention, samples consisted entirely of newspaper.

Mitigating methane emissions and air intrusion in heterogeneous landfills with a high permeability layer.

Spatially variable refuse gas permeability and landfill gas (LFG) generation rate, cracking of the soil cover, and reduced refuse gas permeability because of liquid addition can all affect CH(4) collection efficiency when intermediate landfill covers are installed. A new gas collection system that includes a near-surface high permeability layer beneath the landfill cover was evaluated for enhancing capture of LFG and mitigating CH(4) emissions. Simulations of gas transport in two-dimensional domains demonstrated that the permeable layer reduces CH(4) emissions up to a factor of 2 for particular spatially variable gas permeability fields.

Quantifying factors limiting aerobic degradation during aerobic bioreactor landfilling.

A bioreactor landfill cell at Yolo County, California was operated aerobically for six months to quantify the extent of aerobic degradation and mechanisms limiting aerobic activity during air injection and liquid addition. The portion of the solid waste degraded anaerobically was estimated and tracked through time. From an analysis of in situ aerobic respiration and gas tracer data, it was found that a large fraction of the gas-filled pore space was in immobile zones where it was difficult to maintain aerobic conditions, even at relatively moderate landfill cell-average moisture contents of 33-36%.

Assessment of methods for collecting fallout brake pad wear debris for environmental analysis.

Three methods for collecting or generating fallout brake pad wear debris for environmental analysis were assessed: collection from wheels or hubs of automobiles (natural), generation from an inexpensive sanding process (sanded), and collection of fallout debris from dynamometer tests using the Los Angeles City Traffic protocol (LACT). Brake wear debris was collected from four automobiles with semimetalic brake pads and analyzed for physicochemical properties. For automobiles where all three types of debris were collected, bulk copper mass fractions ranged from 22-23% in sanded particles and 24-27% in LACTparticles, but were reduced to 1-6% in natural debris.