Cyclic Voltammetry Study of Noble Metals and Their Alloys for Use in Implantable Electrodes.

Innovation in the application and miniaturization of implantable electrodes has caused a spike in new electrode material research; however, few robust studies are available that compare different metal electrodes in biologically relevant media. Herein, cyclic voltammetry has been employed to compare platinum, palladium, and gold-based electrodes' potentiometric scans and their corresponding charge storage capacities (CSCs). Ten different noble metals and alloys in these families were tested under pseudophysiological conditions in phosphate-buffered saline (pH 7.

Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation.

It is still an open challenge to find a biodegradable metallic material exhibiting sufficient mechanical properties and degradation behavior to serve as an arterial stent. In this study, Zn-Mg alloys of 0.002 (Zn-002Mg), 0.

Biocompatible curcumin loaded PMMA-PEG/ZnO nanocomposite induce apoptosis and cytotoxicity in human gastric cancer cells.

Although curcumin is efficient in killing cancer cells, its poor water solubility and assocaited inadequate bioavailability remain major limitations to its therapeutic application. The formulation of curcumin micellar nanoparticles (NPs) encapsulated with a biodegradable polymer promises to significantly improve curcumin's solubility, stability, and bioavailability. The past decade has witnessed the development of nanoscale curcumin delivery systems: curcumin-loaded liposomes or nanoparticles, self-microemulsifying drug delivery systems (SMEDDS), cyclodextrin inclusions, solid dispersions, nanodisks, and nanotubes.

Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys.

Metallic stents are used to promote revascularization and maintain patency of plaqued or damaged arteries following balloon angioplasty. To mitigate the long-term side effects associated with corrosion-resistant stents (i.e.

Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices.

The opportunity for substantial efficiency enhancements of thin film hydrogenated amorphous silicon (a-Si:H) solar photovoltaic (PV) cells using plasmonic absorbers requires ultra-thin transparent conducting oxide top electrodes with low resistivity and high transmittances in the visible range of the electromagnetic spectrum. Fabricating ultra-thin indium tin oxide (ITO) films (sub-50 nm) using conventional methods has presented a number of challenges; however, a novel method involving chemical shaving of thicker (greater than 80 nm) RF sputter deposited high-quality ITO films has been demonstrated. This study investigates the effect of oxygen concentration on the etch rates of RF sputter deposited ITO films to provide a detailed understanding of the interaction of all critical experimental parameters to help create even thinner layers to allow for more finely tune plasmonic resonances.

FIB-TEM Study of Magnesium Corrosion Products after 14 Days in the Murine Artery.

After a decade of intensive research on magnesium biodegradation, the composition and structure of corrosion products formed during in vivo corrosion are still not precisely known. Focused ion beam (FIB) micromilling and transmission electron microscopy (TEM) were used to elucidate the nanostructure and crystallography of the corrosion products that form at or near the interface between the corrosion products and metallic magnesium. This study built upon previously reported scanning electron microscopy, infrared spectroscopy, and energy dispersive X-ray spectroscopy data.

Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents.

Although corrosion resistant bare metal stents are considered generally effective, their permanent presence in a diseased artery is an increasingly recognized limitation due to the potential for long-term complications. We previously reported that metallic zinc exhibited an ideal biocorrosion rate within murine aortas, thus raising the possibility of zinc as a candidate base material for endovascular stenting applications. This study was undertaken to further assess the arterial biocompatibility of metallic zinc.

Fabrication and Short-Term in Vivo Performance of a Natural Elastic Lamina-Polymeric Hybrid Vascular Graft.

Although significant advances have been made in the development of artificial vascular grafts, small-diameter grafts still suffer from excessive platelet activation, thrombus formation, smooth muscle cell intimal hyperplasia, and high occurrences of restenosis. Recent discoveries demonstrating the excellent blood-contacting properties of the natural elastic lamina have raised the possibility that an acellular elastic lamina could effectively serve as a patent blood-contacting surface in engineered vascular grafts. However, the elastic lamina alone lacks the requisite mechanical properties to function as a viable vascular graft.

Rates of in vivo (arterial) and in vitro biocorrosion for pure magnesium.

The development of magnesium-based materials for bioabsorbable stents relies heavily on corrosion testing by immersion in pseudophysiological solutions, where magnesium degrades faster than it does in vivo. The quantitative difference in corrosion kinetics in vitro and in vivo is largely unknown, but, if determined, would help reduce dependence on animal models. In order to create a quantitative in vitro-in vivo correlation based on an accepted measure of corrosion (penetration rate), commercially pure magnesium wires were corroded in vivo in the abdominal aortas of rats for 5-32 days, and in vitro for up to 14 days using Dulbecco's modified eagle medium.

Magnesium in the murine artery: probing the products of corrosion.

Many publications are available on the physiological and pseudophysiological corrosion of magnesium and its alloys for bioabsorbable implant application, yet few focus on the characterization of explanted materials. In this work, commercially pure magnesium wires were corroded in the arteries of rats for up to 1 month, removed, and both bulk and surface products characterized. Surface characterization using infrared spectroscopy revealed a duplex structure comprising heavily magnesium-substituted hydroxyapatite that later transformed into an A-type (carbonate-substituted) hydroxyapatite.

A new in vitro-in vivo correlation for bioabsorbable magnesium stents from mechanical behavior.

Correlating the in vitro and in vivo degradation of candidate materials for bioabsorbable implants is a subject of interest in the development of next-generation metallic stents. In this study, pure magnesium wire samples were corroded both in the murine artery (in vivo) and in static cell culture media (in vitro), after which they were subjected to mechanical analysis by tensile testing. Wires corroded in vivo showed reductions in strength, elongation, and the work of fracture, with additional qualitative changes between tensile profiles.

Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents.

Zinc is proposed as an exciting new biomaterial for use in bioabsorbable cardiac stents. Not only is zinc a physiologically relevant metal with behavior that promotes healthy vessels, but it combines the best behaviors of both current bioabsorbable stent materials: iron and magnesium. Shown here is a composite image of zinc degradation in a murine (rat) artery.

Tensile testing as a novel method for quantitatively evaluating bioabsorbable material degradation.

Bioabsorbable metallic materials have become a topic of interest in the field of interventional cardiology because of their potential application in stents. A well-defined, quantitative method for evaluating the degradation rate of candidate materials is currently needed in this area. In this study, biodegradation of 0.