Using artificial intelligence to predict the final color of leucite-reinforced ceramic restorations.

Objectives: The aim of this study was to evaluate the accuracy of machine learning regression models in predicting the final color of leucite-reinforced glass CAD/CAM ceramic veneer restorations based on substrate shade, ceramic shade, thickness and translucency.

Methods: Leucite-reinforced glass ceramics in four different shades were sectioned in thicknesses of 0.3, 0.

Microshear bond strength of resin cement to glass-ceramics after intaglio surface staining.

Statement Of Problem: Applying stains to the intaglio surface of computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic ceramic restorations has been proposed as an option to help mask darkened substrates. However, little is known about the effects of this procedure on the adhesion between the resin cement and the ceramic.

Purpose: The purpose of this in vitro study was to evaluate the effect of intaglio surface staining on the microshear bond strength between 2 CAD-CAM ceramics and a resin cement.

Progression of non-carious cervical lesions: 3D morphological analysis.

Objectives: This longitudinal study aimed to investigate morphologically and quantitatively the progression of non-carious cervical lesions (NCCLs) using a confocal laser scanning microscope (CLSM) and replica models.

Materials And Methods: The samples examined comprised sets of replicas annually obtained from 83 lesions in 16 participants over 3 to 5 years. All lesions were visually categorized as wedge-shaped, saucer-shaped, or mixed-shaped lesions.

Moist vs over-dried etched dentin: FE-SEM/TEM and bond strength evaluation of resin-dentin interfaces produced by universal adhesives.

Objective: To evaluate the influence of the degree of dentin moisture on interfacial ultramorphology and bond strength (μTBS) of universal adhesives.

Materials And Methods: Futurabond U (FBU), Scotchbond Universal (SBU), Adhese Universal (ADU), and Prime&Bond active (PBA) were used. After acid-etching, moist or over-dried dentin surfaces were tested.

Dentin bond strength and nanoleakage of the adhesive interface after intracoronal bleaching.

This study evaluated dentin bond strength (BS) and nanoleakage of non- and pre-etched dentin immediately (T ,), 7 days (T ), and 14 days (T ) after bleaching. Bovine incisors (150) were selected and half of them submitted to intrapulpal dentin etching (e). Non- and pre-etched dentin were subjected to the following (n = 15): no bleaching/control (C); 35% carbamide peroxide (CP); 35% hydrogen peroxide (35% HP); 25% hydrogen peroxide (25% HP); and sodium perborate (SP).

Comparative bonding ability to dentin of a universal adhesive system and monomer conversion as functions of extended light curing times and storage.

Objectives: The purpose of this in vitro study was to evaluate the bonding ability and monomer conversion of a universal adhesive system applied to dentin as functions of different curing times and storage. The results were compared among a variety of commercial adhesives.

Materials And Methods: Flat superficial dentin surfaces were exposed on human molars and assigned into one of the following adhesives (n = 15): total-etch Adper Single Bond 2 (SB) and Optibond Solo Plus (OS), self-etch Optibond All in One (OA) and Clearfil SE Bond (CSE), and Scotchbond Universal Adhesive in self-etch mode (SU).

Effects of the application techniques of self-adhesive resin cements on the interfacial integrity and bond strength of fiber posts to dentin.

Objective:: To evaluate the influence of an application technique of a glass-fiber post using self-adhesive resin cements on the push-out bond strength and the presence of bubbles in the root thirds. The cements were either applied according to the manufacturer's instruction or using a commercial delivering system (Centrix), at which the cement pastes were collected and applied after manipulation.

Material And Methods:: Self-adhesive resin cements (RelyX U200/3M ESPE-U200; Maxcem Elite/Kerr-MAX; Clearfil SA Cement/Kuraray-CSA) and a conventional cement (RelyX ARC/3M ESPE-ARC) were used to cement a post and applied either based on the manufacturer's instructions or using a Centrix syringe to deliver the cements directly onto the post of choice, or directly into canal.

Cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time.

This in vitro study evaluated in fibroblast cultures the direct cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Paper discs were impregnated with adhesives and light-cured (10, 20 or 40 s). The discs were then immersed in culture medium to obtain the eluates for the experimental groups (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal).

The influence of hemostatic agents on dentin and enamel surfaces and dental bonding: a systematic review.

Background: Hemostatic agents have been used clinically in dentistry for many years to control bleeding. The authors reviewed scientific publications in which researchers investigated the effects of hemostatic agents on dentin and enamel surfaces and on bonding of adhesive systems and resin cements.

Types Of Studies Reviewed: The authors screened PubMed and Scopus databases for studies in English published from 1980 to 2013.

One-year water sorption and solubility of "all-in-one" adhesives.

The aim of this study was to evaluate the water sorption and solubility of different adhesives. Adper Easy Bond, Adper Single Bond Plus, Bond Force, Clearfil SE Bond (bonding resin only), and Xeno IV were the materials evaluated. Ten disks of each adhesive were made in Teflon molds and evaporation of any volatile components was allowed.

Effect of dentin biomodification using naturally derived collagen cross-linkers: one-year bond strength study.

Purpose. This study investigated the long-term resin-dentin bond strength of dentin biomodified by proanthocyanidin-rich (PA) agents. Materials and Methods.

Two-year bond strengths of "all-in-one" adhesives to dentine.

Objectives: To test the long-term in vitro bonding performance of "all-in-one" self-etch adhesives to dentine.

Methods: Adper Prompt (3M ESPE), Bond Force (Tokuyama), Brush & Bond (Parkell), iBond Self Etch (Heraeus Kulzer), OptiBond All-In-One (Kerr), and Xeno IV (Dentsply Caulk) were tested. The two-step self-etch adhesive Clearfil SE Bond (Kuraray) served as the control.

Spotlight on bond strength testing--unraveling the complexities.

The variability in methods and outcomes of bond strength testing reports is well documented in the dental literature. Many studies lack important information, which impairs the ability to reproduce them as well as to compare them to other studies in the literature. In order to critically discuss the important issues around bond strength testing methods, and to move closer to at least standardizing the reporting of such studies, the Academy of Dental Materials held a conference in 2009 entitled Adhesion in Dentistry-Analyzing Bond Strength Testing Methods, Variables, and Outcomes.

Long-term stability of dentin matrix following treatment with various natural collagen cross-linkers.

Objectives: Collagen disorganization is one of the main degradation patterns found in unsuccessful adhesive restorations. The hypothesis of this study was that pretreatment using natural collagen cross-linking agents rich in proanthocyanidin (PA) would improve mechanical properties and stability over time of the dentin collagen and, thus, confer a more resistant and lasting substrate for adhesive restorations.

Methods: PA-based extracts, from grape seed (GSE), cocoa seed (CSE), cranberry (CRE), cinnamon (CNE) and açaí berry (ACE) were applied over the demineralized dentin.

Effects of water-storage on the physical and ultramorphological features of adhesives and primer/adhesive mixtures.

The aims of this study were to evaluate the ultimate tensile strength (UTS) and elastic modulus (E) of adhesives, and primer/adhesive mixtures after aging for 6 months in water or oil; and to compare silver uptake patterns under the TEM. A one-step self-etching adhesive (One-up Bond F: OB), two two-step self-etching primers (SE Bond: SE and Protect Bond: CP), and two etch-and-rinse systems (Single Bond: SB and Prime&Bond NT: PB) were used. Bonding and primer solutions of self-etching systems were also mixed (SE+P and CP+P).

Solubility study of phytochemical cross-linking agents on dentin stiffness.

Objectives: The effects of interactions between cross-linking proanthocyanidins (PA) in polar solvents and type-I collagen of demineralized dentin were investigated.

Methods: Three PA-rich extracts, two from grape seed (GSEP and GSES) and one from cocoa (COE), were dissolved (water, ethanol:water and acetone:water) and analyzed for their ability to increase the modulus of elasticity of demineralized dentin. Sound dentin beams (0.

Fluoride-containing adhesive: durability on dentin bonding.

Objectives: To evaluate (1) the influence of fluoride-containing adhesive on microtensile bond strength (microTBS) and (2) in vitro secondary caries inhibition at the resin-dentin interface after 24 h and 3 months water-storage and (3) the degree of conversion of different adhesives after 24h 1 month.

Methods: Flat surfaces of human teeth were ground and randomly assigned to six groups: (SBMP-24) Scotchbond Multi-Purpose control [SBMP], 24 h; (SE-24) SBMP etch and primer+Clearfil SE Bond adhesive [SE], 24h; (PB-24) SBMP etch and primer+Clearfil Protect Bond adhesive [PB], 24h; (SBMP-3) SBMP, 3 months; (SE-3) SBMP+SE, 3 months; and (PB-3) SBMP+PB, 3 months. To evaluate the effect of the adhesive resin alone, all teeth were etched with 35% phosphoric acid and primed with SBMP primer prior to applying the adhesive resin.

Effects of surface texture and etching time on roughness and bond strength to ground enamel.

Aim: The aim of this study was to assess the influence of surface texture and etching technique on surface roughness (Ra) and bond strength (BS) to enamel and to determine if a correlation exists between them.

Methods And Materials: Fifty enamel blocks were either roughened with 600-grit SiC paper or polished with diamond pastes. After establishing ten test groups (n=5), the initial Ra measurements, rough (R) and smooth (S) enamel surfaces were etched according to the following protocols: Group 1(R)/Group 2(S)- 35% phosphoric acid gel (H3PO4) for 15 seconds; Group 3(R)/Group 4(S)- 35% H3PO4 for 60 seconds; Group 5(R)/Group 6(S)- Clearfil SE Bond primer for 20 seconds; Group 7(R)/Group 8(S)- self-etching primer (SEP) for 60 seconds; Group 9(R)/Group 10(S)- 35% H3PO4 for 15 seconds + SEP for 20 seconds.

Effect of propionaldehyde or 2,3-butanedione additives on the mechanical properties of Bis-GMA analog-based composites.

Objectives: The purpose of this study was to evaluate the effect of two additives, propionaldehyde/aldehyde or 2,3-butanedione/diketone, on mechanical properties of Bis-GMA-based composites containing TEGDMA, propoxylated Bis-GMA (CH(3)Bis-GMA) or propoxylated fluorinated Bis-GMA (CF(3)Bis-GMA).

Methods: Three control composites, Bis-GMA/diluent monomer (25/75 mol%), and six test composites, Bis-GMA/diluent monomer/aldehyde or diketone (17/51/32 mol%) were prepared. All composites contained hybrid treated filler (barium aluminosilicate glass/pyrogenic silica; 60 wt%), and 0.

Long-term bond strengths to dentin treated with different re-wetting solutions.

Purpose: To evaluate the microtensile bond strengths (microTBS) of two etch-and-rinse one-bottle adhesive systems to air-dried dentin re-wet with different agents.

Methods: 48 bovine teeth were ground flat to 600-grit and were assigned for treatment with either Single Bond or One-Step adhesives. Each group had three subgroups of re-wetting agents: water, Gluma Desensitizer and Aqua-Prep F.

Effect of resin adhesive systems on root caries formation in vitro.

Objective: To evaluate the capability of different adhesive systems to inhibit in vitro caries formation.

Method And Materials: Four materials were tested: Gluma Comfort Bond (GL; Heraeus Kulzer), Gluma Comfort Bond + Desensitizer (GL+; Heraeus Kulzer), iBond (iB; Heraeus Kulzer), and One-up Bond F (OUB; Tokuyama). Bovine roots were ground to obtain flat mesial and distal dentin surfaces.