Photobiomodulation, Transmucosal Laser Irradiation of Blood, or B complex as alternatives to treat Covid-19 Related Long-Term Taste Impairment: double-blind randomized clinical trial.

COVID-19 Related Long-Term Taste Impairment (CRLTTI) is a condition that can be expressed after COVID-19 contagion, lasting for months or even years, affecting the routine and quality of life of individuals. Participants expressing CRLTTI, with a minimum of 2 months, attested by PCR-RT test were assessed for taste and smell, and underwent experimental treatments in 6 distinct groups: Photobiomodulation (PBM) in tongue dorsum and lateral (660 nm, 808 nm, association of 660 and 808 nm), Transmucosal Laser Irradiation of Blood (TLIB)-ventral surface of tongue (660 nm), B complex supplementation, and Sham laser. No intergroup statistical differences were observed at the final evaluation, despite the tendencies of better results with PBM and TLIB observed.

Photobiomodulation Therapy on the Palliative Care of Temporomandibular Disorder and Orofacial/Cervical Skull Pain: Preliminary Results from a Randomized Controlled Clinical Trial.

The main symptoms of temporomandibular disorders (TMDs) are pain from musculoskeletal and/or joint-in the head and neck region-and complaints of difficulty in mandibular movements. The photobiomodulation therapy (PBMT) has been reported as a promising treatment in the management of these symptoms. The objective of this research was to assess the effect of PBMT immediately after irradiation on TMDs symptoms under a prospective clinical trial, randomized, triple-blinded, placebo-controlled, and with two parallel arms.

In vitro effectiveness of different dental bleaching protocols using violet LED.

Purpose: There has been growing demand for dental bleaching worldwide, however, despite being effective, hydrogen peroxide (HP) can negatively affect the dental structure. Thus, new techniques, such as violet LED light have emerged and need to be studied. The aim of this study was to analyze and compare the effectiveness of violet LED light alone or combined with 35% HP gel.

Influence of Er:YAG laser irradiation settings on dentin-adhesive interfacial ultramorphology and dentin bond strength.

This study evaluated the effects of Erbium-doped yttrium aluminium garnet (Er:YAG) laser settings and dentin bonding agents on ultramorphological characteristics of resin-laser-irradiated dentin interfaces and dentin bond strength (BS) of these adhesive systems. Additionally, dentin depth affected by Er:YAG laser irradiations was measured. The experiments were performed on occlusal dentin surfaces of third molars that were flattened with 600-grit SiC sandpaper.

The Influence of Different Bleaching Protocols on Dentinal Enzymatic Activity: An In Vitro Study.

This study aimed to investigate matrix metalloproteinase (MMP) activity in human dentin using in-situ and gelatin zymography, after at-home and in-office bleaching, related to their clinical exposure times. Dentin specimens ( = 5) were treated with 35% hydrogen peroxide (50 min per session/4 sessions), 10% carbamide peroxide (180 min/21 sessions), or no treatment. All were subjected to in-situ zymography.

Blinded, parallel and randomized clinical evaluation of in-office dental bleaching with violet LED (405-410nm).

This clinical study evaluated the effect of bleaching performed with violet LED light (405-410 nm), either combined with hydrogen peroxide (HP) gel, or not, on color change, dental sensitivity, participants' satisfaction and impact on their quality of life. A hundred participants were divided into one of the groups (n = 25): G1 - 35% HP (4 sessions, 1x/week); G2 - violet LED (4 sessions, 1x/week); G3 - violet LED (4 sessions, 2x/week); G4 - hybrid technique (violet LED + 35% HP; 4 sessions, 1x/week). Color evaluation was performed with colorimetric tests (objective and subjective), before, 14 days and 3 months after completion.

Effectiveness of Laser Therapy and Laser Acupuncture on Treating Paraesthesia After Extraction of Lower Third Molars.

This randomized clinical trial evaluated the sensitive return of the lower alveolar nerve (LAN) using two photobiomodulation therapy (PBMT) techniques, after the extraction of lower third molars or implant surgery. Sixty participants with sensory impairment of LAN were randomly divided into three groups ( = 20): group C-systemic medication (control-ETNA, 01 capsule, 8/8 h, 30 days); group laser therapy (LT) (808 nm, 100 mW, 40 sec/point, 4 J/point, intra/extraoral, irradiation following nerve path); group laser acupuncture (LA) (same parameters as the LT group, applied at six acupuncture points on the affected side (ST 4 [Dicang], M-HN-18 [Jiachengjiang], CV 24 [Chengjiang], ST 5 [Daying], ST 6 [Jiache], and point A1 [YNSA]). The following evaluations were performed, at predetermined times: general perception of paresthesia, thermal perception, vibratory mechanical perception, two-point discrimination, pain perception, and tactile perception.

In situ Effect of CO2 Laser (9.3 μm) Irradiation Combined with AmF/NaF/SnCl2 Solution in Prevention and Control of Erosive Tooth Wear in Human Enamel.

Objectives: This single-blind, controlled crossover in situ study aimed to evaluate the effect of CO2 laser (9.3 µm) irradiation combined with AmF/NaF/SnCl2 solution on prevention and control of erosive tooth wear (ETW) in human enamel.

Materials And Methods: Two trial conditions were analyzed, condition 1 as ETW prevention (sound tooth surface) and condition 2 as ETW control (in vitro initial erosive lesion).

Influence of 35% hydrogen peroxide gel renewal on color change during in-office dental photobleaching with violet LED: A split-mouth randomized controlled clinical trial.

Background: To clinically evaluate the effect of 35% hydrogen peroxide gel renewal in association with violet LED (405-410nm) through a split-mouth randomized controlled clinical trial.

Methods: The treatment consisted in 3 bleaching sessions of 15 min each, with an interval of 7 days between them, using 35% hydrogen peroxide combined to violet LED irradiation. Selected patients had two experimental segments for the split-mouth design: No change of the bleaching gel during each session (NBGR) and 3 changes of the bleaching gel every 5 min for each session (BGR).

In-office bleaching protocols using violet LED: A split mouth case report.

A new LED wavelength, violet LED (VL) with a wavelength between 405 - 410 nm was recently introduced to be used for in-office dental bleaching. In comparison to the blue LED system (440 to 485 nm), the shorter wavelength has more energy carried in its photons and also corresponds to the absorption peak of the stained particles, which lead to whitening utilizing a physical process. Considering the need to suggest and develop new protocols with this new technology, this article reports 2 different dental bleaching protocols developed in a split-mouth model using VL.

Effect of TiF varnish after pre-treatment with proanthocyanidin or chlorhexidine on the progression of erosive dentin loss in the presence or absence of the demineralized organic matrix.

This study evaluated the protective effect of TiF varnish, after pre-treatment with proantocyanidin or chlorhexidine, on the progression of erosive dentin loss (EDL), under the presence or absence of the demineralized organic matrix (DOM). Bovine root dentin samples were eroded for 30 min (0.1% citric acid, pH 2.

Influence of Er:YAG laser surface treatment on flexural and bond strengths to glass-infiltrated zirconia-reinforced ceramic.

To evaluate the effect of Er:YAG laser conditioning of a glass-infiltrated alumina-based zirconia-reinforced ceramic on its flexural strength and on bonding to a resin cement. Sixteen blocks (5 × 5 × 4 mm) and 50 discs (Ø 12 mm, 1 mm thickness) of In-Ceram Zirconia (ICZ) obtained from CAD-CAM blocks were infiltrated with glass. For the microtensile bond strength (μTBS) test, all blocks were treated with aluminum oxide (AOX) and divided into 4 groups (n = 4): G1 (AOX), no combined surface treatment; G2 (ROC), tribochemical silica-coating; G3 (EY200), Er:YAG laser 200 mJ/15 Hz; and G4 (EY250), Er:YAG laser 250 mJ/10 Hz.

Monitoring enamel caries on resin-treated occlusal surfaces using quantitative light-induced fluorescence: an in vitro study.

The aim of this study is to evaluate the ability of quantitative light-induced fluorescence (QLF) to monitor enamel caries lesions of different severity stages located on the occlusal surfaces of permanent teeth before and after treatment with resin infiltrant. Sixty extracted permanent teeth had one occlusal site selected and were categorized according to the International Caries Detection and Assessment System (ICDAS) criteria. The teeth were divided into three groups (n = 20): ICDAS 1, ICDAS 2, and ICDAS 3.

Influence of biosafety materials of the laser output power.

Biosafety materials used in the correct handling of low power laser equipment may interfere on the power delivered at the target tissue and, possibly, on the effects on biological tissues. The aim of this study was to evaluate the interference of the use of polyvinyl chloride (PVC) and polyethylene (PEAD) protection materials on the output power of low power lasers. Two low power diode laser devices with different wavelengths (red and infrared) were used.

Effect of gel replacement during in-office dental bleaching: a case report.

In-office dental bleaching allows the dentist to have greater control of the procedure and prevents patients from ingesting chemicals. To obtain optimum results, in-office bleaching usually requires a longer period of application as well as changes of the bleaching agent applied to the tooth surfaces at each appointment. The objective of this case report was to assess, by means of a split-mouth design in a single patient, the final tooth color and tooth sensitivity resulting from 2 different bleaching protocols: 1 application of 35% hydrogen peroxide for 45 minutes and 3 applications of 35% hydrogen peroxide for 15 minutes each.

Photobiomodulation with Low-Level Laser in the Treatment of Trismus After Radiotherapy: A Case Report.

Radiotherapy is one of the treatments for cancer, which leads to many oral side effects that affect the quality of life of the patient; among them, trismus is considered. Considering the various therapies to treat this collateral effect of radiotherapy, photobiomodulation (PBM) with low-level laser is a contemporary alternative. In this article, an all-clinical case report is presented in which the patient was given trismus after radiotherapy and PBM with low-level laser.

Associative Protocol for Dentin Hypersensitivity Using Nd:YAG Laser and Desensitizing Agent in Teeth with Molar-Incisor Hypomineralization.

The aim of this article was to describe and discuss a clinical case in which the Nd:YAG laser and a desensitizing agent were associated in a protocol for dentin hypersensitivity (DH) in teeth with molar-incisor hypomineralization (MIH). DH is a common condition among the population, being one of the main reasons for patients to seek for a dental treatment. MIH can be considered a condition that induces DH.

Photobiomodulation therapy on the palliative care of temporomandibular disorder and orofacial/cervical skull pain: study protocol for a randomized controlled clinical trial.

Background: Temporomandibular disorder (TMD) is the most common cause of orofacial and cervical skull pain and is considered to be a public health problem, affecting 5% to 12% of the world population. TMD is multifactorial and there are several types of treatment, with the conservative types being indicated more often as they are less aggressive and reversible. The main aim of these treatments is to relieve symptoms, reduce of pain, and restore orofacial and cervical skull functions.

Influence of Er:YAG laser pulse duration on the long-term stability of organic matrix and resin-dentin interface.

The purpose of this study was to explore the influence of Er:YAG laser irradiation with different pulse durations on the organic matrix, micromorphology of the hybrid layer (HL), and bond strength over time. Sixty caries-free human molars were cut to obtain flat dentin surfaces which were randomly divided into 4 groups: control (not irradiated-G1) and laser groups (80 mJ/2 Hz) with pulse duration ranging between 50 (G2), 300 (G3), and 600 μs (G4). A self-etch adhesive system (Universal 3M ESPE) was applied on pre-treated dentin surfaces and cylinders of resin composite were built up and stressed in a universal testing machine (μSBS) at 24 h and after12 months (n = 12).

Photobiomodulation in the Postoperative of Bichectomy Surgeries: Case Series.

Background: Several photobiomodulation (PBM) protocols with low-power lasers have been reported for pain control and tissue repair in the postoperative period of oral surgeries. However, there are still no reports of a protocol for bichectomy surgeries' postoperative period.

Objective: This article presents six reports of clinical cases in which bichectomy surgery was performed.

Is photobiomodulation (PBM) effective for the treatment of dentin hypersensitivity? A systematic review.

The present study aims to evaluate the current scientific data regarding the effectiveness of photobiomodulation (PBM) in the treatment of dentin hypersensitivity (DH) as an alternative method for pain control. A systematic review was conducted to assess the effectiveness of PBM as treatment for DH. A complete literature search was performed up to October 2016.

Antimicrobial photodynamic therapy (aPDT) and photobiomodulation (PBM - 660nm) in a dog with chronic gingivostomatitis.

Chronic gingivostomatitis in dogs is an inflammatory syndrome of the oral cavity, which treatment and control of concomitant periodontitis allow healing in most of the cases. In the presence of recurrent lesions, invasive methods are necessary to treat lesions and pain. As a conservative adjuvant method, photobiomodulation (PBM) with low power laser is able to promote reduction of tissue pain and tissue inflammation besides increasing vascularization and healing, restoring the normal function of the irradiated organ in a shorter time.

Influence of Electroacupuncture and Laser-Acupuncture on Treating Paresthesia in Patients Submitted to Combined Orthognathic Surgery and Genioplasty.

The goal of this research was to observe the influence of electroacupuncture (EA) and laser-acupuncture on the return of tactile/pain sensitivity in patients who underwent orthognathic surgery. Thirty volunteers subjected to orthognathic surgery were evaluated and randomly divided into 2 groups, in which 3 treatments were evaluated: control ( = 30) (G0, medication + placebo laser treatment) and 2 experimental treatments ( = 15) (G1, medication + EA) or G2 (medication + laser-acupuncture). The control group had  = 30 because for each experimental treatment conducted on a volunteer's hemi-face, there was a control treatment on the other hemi-face.

Frequency of Application of AmF/NaF/SnCl2 Solution and Its Potential in Inhibiting the Progression of Erosion in Human Dental Enamel - An In Vitro Study.

Purpose: To evaluate whether increasing the frequency of its use can enhance the protective effect of AmF/NaF/SnCl2 solution against dental erosion.

Materials And Methods: Sixty human enamel samples were obtained from sound human third molars, and after the formation of incipient erosive lesions (1% citric acid, pH 4.0, for 3 min), they were divided into five treatment groups (n = 12): G1 - deionised water (negative control); G2 - NaF solution (positive control) once a day; G3 - NaF solution (positive control) twice a day; G4 - AmF/NaF/SnCl2 solution once a day; G5 - AmF/NaF/SnCl2 solution twice a day.