High-Performance Polymer Blends: Manufacturing of Polyetherimide (PEI)-Polycarbonate (PC)-Based Filaments for 3D Printing.

The demand for high-performance polymers in 3D printing continues to grow due to their ability to produce intricate and complex structures. However, commercially available high-temperature 3D printing materials often exhibit limitations such as brittleness, warping, thermal sensitivity, and high costs, highlighting the need for advanced filament development. This study investigates the fabrication of polyetherimide (PEI) and polycarbonate (PC) blends via melt extrusion to enhance material properties for stable additive manufacturing.

Thermochemical and rheological characterization of highly reactive thermoset resins for liquid moulding.

Highly reactive thermosets are currently expanding the processability of high-performance structures for transportation industry. The short polymerization time makes it a suitable process to replace metallic structures with polymer matrix-based composite materials. The resin characterization is a fundamental step to obtain the properties and the associated constitutive models, which are required to design and optimize the manufacturing process parameters of composite materials.

Dry Synthesis of Binder-Free Ruthenium Nitride-Coated Carbon Nanotubes as a Flexible Supercapacitor Electrode.

Ruthenium nitride was successfully deposited on a multiwalled carbon nanotube (MWCNT) forest grown on a stainless-steel mesh substrate by radiofrequency plasma-assisted pulsed laser deposition. This novel dry fabrication method for flexible supercapacitor electrodes eliminates toxic byproducts and the need for any binder component. Experimental results show a successful thin film coating of the individual MWCNTs with RuN under various synthesis conditions.

β-Myrcene/isobornyl methacrylate SG1 nitroxide-mediated controlled radical polymerization: synthesis and characterization of gradient, diblock and triblock copolymers.

β-Myrcene (My), a natural 1,3-diene, and isobornyl methacrylate (IBOMA), from partially bio-based raw materials sources, were copolymerized by nitroxide-mediated polymerization (NMP) in bulk using the SG1-based BlocBuilder™ alkoxyamine functionalized with an -succinimidyl ester group, NHS-BlocBuilder, at = 100 °C with initial IBOMA molar feed compositions = 0.10-0.90.

Piezoresistance in polymer nanocomposites with high aspect ratio particles.

In this paper, we address the problem of positive piezoresistance in high aspect ratio particle based polymer nanocomposites, a hybrid system at the center of research on flexible piezoresistive materials. We introduce a percolation theory based model relating the variation in electrical resistance to compressive strain and show that it gives accurate theoretical fits to experimental data presented in this paper, as well as to much of the available data in the literature. In contrast to existing theories, the model captures the characteristics of the particle network through experimentally definable parameters and does not rely on assumptions regarding the nature of the particles and/or the configuration of the network.

Influence of the reaction stoichiometry on the mechanical and thermal properties of SWCNT-modified epoxy composites.

Previous studies suggest that carbon nanotubes (CNTs) have a considerable influence on the curing behavior and crosslink density of epoxy resins. This invariably has an important effect on different thermal and mechanical properties of the epoxy network. This work focuses on the important role of the epoxy/hardener mixing ratio on the mechanical and thermal properties of a high temperature aerospace-grade epoxy (MY0510 Araldite as an epoxy and 4,4'-diaminodiphenylsulfone as an aromatic hardener) modified with single-walled carbon nanotubes (SWCNTs).

Quantitative dispersion analysis of inclusions in polymer composites.

The state of dispersion plays an important role on the performance of polymer nanocomposites. Dispersion is usually assessed based on the qualitative evaluation of microscopy micrographs. In this paper, a quantitative algorithm is introduced for analyzing the dispersion of inclusions in polymer composites using image analysis.

Dispersion stability in carbon nanotube modified polymers and its effect on the fracture toughness.

In this paper, the dispersion stability of multiwall carbon nanotubes (MWNTs) mixed with an epoxy resin is studied. An instrumented optical microscope with a hot stage was used to study the evolution of the carbon nanotubes (CNTs) dispersion during the cure of the resin. A new image processing approach is then introduced to quantify dispersion and identify the source of dispersion degradation during the cure.

An interaction stress analysis of nanoscale elastic asperity contacts.

A new contact mechanics model is presented and experimentally examined at the nanoscale. The current work addresses the well-established field of contact mechanics, but at the nanoscale where interaction stresses seem to be effective. The new model combines the classic Hertz theory with the new interaction stress concept to provide the stress field in contact bodies with adhesion.

Interaction stresses in carbon nanotube-polymer nanocomposites.

A new technique of atomic force microscopy interaction measurement is used to obtain the three-dimensional stress field in nanocomposites made of single-walled carbon nanotubes (SWNT) and poly(methyl methacrylate) (PMMA) matrix. This original approach expands the current capability of AFM from imaging and force mapping to three-dimensional stress field measurements. Latest developments in the field have been limited to three-dimensional imaging at the surface only, and one value (adhesion) force mapping.

Toughening of epoxy matrices with reduced single-walled carbon nanotubes.

Reduced single-walled carbon nanotubes (r-SWCNT) are shown to react readily at room temperature under inert atmosphere conditions with epoxide moieties, such as those in triglycidyl p-amino phenol (TGAP), to produce a soft covalently bonded interface around the SWCNT. The soft interface is compatible with the SWCNT-free cross-linked cured matrix and acts as a toughener for the composite. Incorporation of 0.