Interplay between Point and Extended Defects and Their Effects on Jerky Domain-Wall Motion in Ferroelectric Thin Films.

Defects have a significant influence on the polarization and electromechanical properties of ferroelectric materials. Statistically, they can be seen as random pinning centers acting on an elastic manifold, slowing domain-wall propagation and raising the energy required to switch polarization. Here we show that the "dressing" of defects can lead to unprecedented control of domain-wall dynamics.

Identifying and analyzing power-law scaling in two-dimensional image datasets.

Power-law distributions provide a general description of diverse natural phenomena in which events with a logarithmically increasing size occur with logarithmically decreasing probability. However, experimentally derived correlated two-dimensional information is often difficult to cleanly interpret as discrete events of defined size. Moreover, physical limitation of techniques such as those based on scanning probe microscopy, which can ideally be used to observe power-law behavior, reduce event number and thus render straightforward power-law fits even more challenging.

Switchable tribology of ferroelectrics.

Switchable tribological properties of ferroelectrics offer an alternative route to visualize and control ferroelectric domains. Here, we observe the switchable friction and wear behavior of ferroelectrics using a nanoscale scanning probe-down domains have lower friction coefficients and show slower wear rates than up domains and can be used as smart masks. This asymmetry is enabled by flexoelectrically coupled polarization in the up and down domains under a sufficiently high contact force.

The Effect of Chemical Environment and Temperature on the Domain Structure of Free-Standing BaTiO via In Situ STEM.

Ferroelectrics, due to their polar nature and reversible switching, can be used to dynamically control surface chemistry for catalysis, chemical switching, and other applications such as water splitting. However, this is a complex phenomenon where ferroelectric domain orientation and switching are intimately linked to surface charges. In this work, the temperature-induced domain behavior of ferroelectric-ferroelastic domains in free-standing BaTiO films under different gas environments, including vacuum and oxygen-rich, is studied by in situ scanning transmission electron microscopy (STEM).

Flat Γ Moiré Bands in Twisted Bilayer WSe_{2}.

The recent observation of correlated phases in transition metal dichalcogenide moiré systems at integer and fractional filling promises new insight into metal-insulator transitions and the unusual states of matter that can emerge near such transitions. Here, we combine real- and momentum-space mapping techniques to study moiré superlattice effects in 57.4° twisted WSe_{2} (tWSe_{2}).

Smooth velocity fields for tracking climate change.

Describing the spatial velocity of climate change is essential to assessing the challenge of natural and human systems to follow its pace by adapting or migrating sufficiently fast. We propose a fully-determined approach, "MATCH", to calculate a realistic and continuous velocity field of any climate parameter, without the need for ad hoc assumptions. We apply this approach to the displacement of isotherms predicted by global and regional climate models between 1950 and 2100 under the IPCC-AR5 RCP 8.

Correlative imaging of ferroelectric domain walls.

The wealth of properties in functional materials at the nanoscale has attracted tremendous interest over the last decades, spurring the development of ever more precise and ingenious characterization techniques. In ferroelectrics, for instance, scanning probe microscopy based techniques have been used in conjunction with advanced optical methods to probe the structure and properties of nanoscale domain walls, revealing complex behaviours such as chirality, electronic conduction or localised modulation of mechanical response. However, due to the different nature of the characterization methods, only limited and indirect correlation has been achieved between them, even when the same spatial areas were probed.

Hystorian: A processing tool for scanning probe microscopy and other n-dimensional datasets.

Research in materials science increasingly depends on the correlation of information from multiple characterisation techniques, acquired in ever larger datasets. Efficient methods of processing and storing these complex datasets are therefore crucial. Reliably keeping track of data processing is also essential to conform with the goals of open science.

A numerical study of the statistics of roughness parameters for fluctuating interfaces.

Self-affine rough interfaces are ubiquitous in experimental systems, and display characteristic scaling properties as a signature of the nature of disorder in their supporting medium, i.e. of the statistical features of its heterogeneities.

Roughness and dynamics of proliferating cell fronts as a probe of cell-cell interactions.

Juxtacellular interactions play an essential but still not fully understood role in both normal tissue development and tumour invasion. Using proliferating cell fronts as a model system, we explore the effects of cell-cell interactions on the geometry and dynamics of these one-dimensional biological interfaces. We observe two distinct scaling regimes of the steady state roughness of in-vitro propagating Rat1 fibroblast cell fronts, suggesting different hierarchies of interactions at sub-cell lengthscales and at a lengthscale of 2-10 cells.

Local Probe Comparison of Ferroelectric Switching Event Statistics in the Creep and Depinning Regimes in Pb(Zr_{0.2}Ti_{0.8})O_{3} Thin Films.

Ferroelectric materials provide a useful model system to explore the jerky, highly nonlinear dynamics of elastic interfaces in disordered media. The distribution of nanoscale switching event sizes is studied in two Pb(Zr_{0.2}Ti_{0.

Surface charged species and electrochemistry of ferroelectric thin films.

The combination of scanning probe microscopy and ambient pressure X-ray photoelectron spectroscopy opens up new perspectives for the study of combined surface chemical, electrochemical and electromechanical properties at the nanoscale, providing both nanoscale resolution of physical information and the chemical sensitivity required to identify surface species and bulk ionic composition. In this work, we determine the nature and evolution over time of surface chemical species obtained after water-mediated redox reactions on Pb(Zr0.2,Ti0.

Non-Ising and chiral ferroelectric domain walls revealed by nonlinear optical microscopy.

The properties of ferroelectric domain walls can significantly differ from those of their parent material. Elucidating their internal structure is essential for the design of advanced devices exploiting nanoscale ferroicity and such localized functional properties. Here, we probe the internal structure of 180° ferroelectric domain walls in lead zirconate titanate (PZT) thin films and lithium tantalate bulk crystals by means of second-harmonic generation microscopy.

Computer vision distortion correction of scanning probe microscopy images.

Since its inception, scanning probe microscopy (SPM) has established itself as the tool of choice for probing surfaces and functionalities at the nanoscale. Although recent developments in the instrumentation have greatly improved the metrological aspects of SPM, it is still plagued by the drifts and nonlinearities of the piezoelectric actuators underlying the precise nanoscale motion. In this work, we present an innovative computer-vision-based distortion correction algorithm for offline processing of functional SPM measurements, allowing two images to be directly overlaid with minimal error - thus correlating position with time evolution and local functionality.

Low-noise humidity controller for imaging water mediated processes in atomic force microscopy.

We demonstrate the construction of a novel low-noise continuous flow humidity controller and its integration with a commercial variable-temperature atomic force microscope fluid cell, allowing precise control of humidity and temperature at the sample during nanoscale measurements. Based on wet and dry gas mixing, the design allows a high mechanical stability to be achieved by means of an ultrasonic atomiser for the generation of water-saturated gas, improving upon previous bubbler-based architectures. Water content in the flow is measured both at the inflow and outflow of the fluid cell, enabling the monitoring of water condensation and icing, and allowing controlled variation of the sample temperature independently of the humidity.

A single probe for imaging photons, electrons and physical forces.

The combination of complementary measurement techniques has become a frequent approach to improve scientific knowledge. Pairing of the high lateral resolution scanning force microscopy (SFM) with the spectroscopic information accessible through scanning transmission soft x-ray microscopy (STXM) permits assessing physical and chemical material properties with high spatial resolution. We present progress from the NanoXAS instrument towards using an SFM probe as an x-ray detector for STXM measurements.

Domain wall roughness in stripe phase BiFeO3 thin films.

Using the model system of ferroelectric domain walls, we explore the effects of long-range dipolar interactions and periodic ordering on the behavior of pinned elastic interfaces. In piezoresponse force microscopy studies of the characteristic roughening of intrinsic 71° stripe domains in BiFeO3 thin films, we find unexpectedly high values of the roughness exponent ζ=0.74±0.

Identification of a strong contamination source for graphene in vacuum systems.

To minimize parasitic doping effects caused by uncontrolled material adsorption, graphene is often investigated under vacuum. Here we report an entirely unexpected phenomenon occurring in vacuum systems, namely strong n-doping of graphene due to chemical species generated by common ion high-vacuum gauges. The effect-reversible upon exposing graphene to air-is significant, as doping rates can largely exceed 10(12) cm(-2) h(-1), depending on pressure and the relative position of the gauge and the graphene device.

Ultrahigh currents in dielectric-coated carbon nanotube probes.

Carbon nanotubes used as conductive atomic force microscopy probes are expected to withstand extremely high currents. However, in existing prototypes, significant self-heating results in rapid degradation of the nanotube probe. Here, we investigate an alternative probe design, fabricated by dielectric encapsulation of multiwalled carbon nanotubes, which can support unexpectedly high currents with extreme stability.

Optimal ferromagnetically-coated carbon nanotube tips for ultra-high resolution magnetic force microscopy.

Using single-walled carbon nanotubes homogeneously coated with ferromagnetic metal as ultra-high resolution magnetic force microscopy probes, we investigate the key image formation parameters and their dependence on coating thickness. The crucial step of introducing molecular beam epitaxy for deposition of the magnetic coating allows highly controlled fabrication of tips with small magnetic volume, while retaining high magnetic anisotropy and prolonged lifetime characteristics. Calculating the interaction between the tips and a magnetic sample, including hitherto neglected thermal noise effects, we show that optimal imaging is achieved for a finite, intermediate-thickness magnetic coating, in excellent agreement with experimental observations.

Multiscaling analysis of ferroelectric domain wall roughness.

Using multiscaling analysis, we compare the characteristic roughening of ferroelectric domain walls in Pb(Zr0.2Ti0.8)O3 thin films with numerical simulations of weakly pinned one-dimensional interfaces.

Conduction at domain walls in insulating Pb(Zr0.2 Ti0.8)O3 thin films.

Domain wall conduction in insulating Pb(Zr(0.2) Ti(0.8))O(3) thin films is demonstrated.

Nanoscale polarization switching mechanisms in multiferroic BiFeO₃ thin films.

Ferroelectric switching in BiFeO₃ multiferroic thin films was studied by piezoresponse force microscopy, as a function of the tip voltage and sweep direction, for samples with two different intrinsic domain structures. In all films, the switched polarization direction follows the in-plane and out-of-plane components of the highly inhomogeneous electric field applied by the microscope tip. In films with 'bubble-like' intrinsic domains, we observed in-plane switching assisted by out-of-plane switching for lower voltage values, and independent in-plane and out-of-plane switching for higher voltages, in both cases allowing full control of the ferroelectric polarization depending on the tip voltage polarity and sweep direction.