An examination of auxetic componentry for applications in human-centred biomedical product design settings.

This paper explores how the examination of additively manufactured auxetic componentry can be applied in human-centred design settings with particular focus on biomedical products. Firstly, the design applications of auxetics are detailed followed by a review of the key problems facing practical researchers in the field with the treatment of boundary conditions identified as a key issue. The testing setup that is then introduced utilises a novel method of part mounting and facilitates optical analysis and real-time force-displacement measurements.

High Power Pulsed LED Driver for Vibration Measurements.

Vibration measurements pose specific experimental challenges to be faced. In particular, optical methods can be used to obtain full-field vibration information. In this scenario, stereo-camera systems can be developed to obtain 3D displacement measurements.

Integrated Approach of Life Cycle Assessment and Experimental Design in the Study of a Model Organic Reaction: New Perspectives in Renewable Vanillin-Derived Chemicals.

This work is focused on performing a quantitative assessment of the environmental impacts associated with an organic synthesis reaction, optimized using an experimental design approach. A nucleophilic substitution reaction was selected, employing vanillin as the substrate, a phenolic compound widely used in the food industry and of pharmaceutical interest, considering its antioxidant and antitumoral potential. To carry out the reaction, three different solvents have been chosen, namely acetonitrile (ACN), acetone (Ace), and dimethylformamide (DMF).

Automatic Multiview Alignment of RGB-D Range Maps of Upper Limb Anatomy.

Digital representations of anatomical parts are crucial for various biomedical applications. This paper presents an automatic alignment procedure for creating accurate 3D models of upper limb anatomy using a low-cost handheld 3D scanner. The goal is to overcome the challenges associated with forearm 3D scanning, such as needing multiple views, stability requirements, and optical undercuts.

Innovative Bioplasticizers from Residual L. Biomass-Derived Levulinic Acid and Their Environmental Impact Assessment by LCA Methodology.

This work is focused on the application of Life Cycle Assessment (LCA) methodology for the quantification of the potential environmental impacts associated with the obtainment of levulinic acid from residual L. biomass and its subsequent valorization in innovative bioplasticizers for tuning the properties as well as the processability of biopolymers. This potentially allows the production of fully biobased and biodegradable bioplastic formulations, thus addressing the issues related to the fossil origin and nonbiodegradability of conventional additives, such as phthalates.

Life Cycle Impact Assessment of Solution Combustion Synthesis of Titanium Dioxide Nanoparticles and Its Comparison with More Conventional Strategies.

This paper represents the first attempt to quantitatively and reliably assess the environmental sustainability of solution combustion synthesis (SCS) with respect to other soft chemistry strategies, which are more conventionally employed in the preparation of engineered oxide nanomaterials, namely hydrolytic and non-hydrolytic sol-gel syntheses (i. e., HSGS and NHSGS).

Management of Asbestos Containing Materials: A Detailed LCA Comparison of Different Scenarios Comprising First Time Asbestos Characterization Factor Proposal.

This work addresses the complex issue of asbestos containing materials (ACMs) management, by focusing on the scenario of six municipalities comprised in the Reggio Emilia province of Emilia Romagna Italian region. Particularly, the life cycle assessment (LCA) methodology was applied in order to assess in a quantitative and reliable manner the human toxicity as well as the ecotoxicity impacts associated with all of the different phases of ACMs management. The latter comprises mapping of ACMs, creation of a risk map for defining priority of intervention, encapsulation and removal of ACMs, as well as the as obtained asbestos containing waste (ACW) end of life.

Geographic and taxonomic notes, addenda and corrigenda on the subtribe Bembidiina Stephens, 1827 of the 2017 'Catalogue of Palaearctic Coleoptera' (Coleoptera, Carabidae, Bembidiina).

Some corrections to the section of subtribe Bembidiina of the Catalogue of Palaearctic Coleoptera, Vol. 1, together with geographic, systematic, and synonymic updates are reported and commented upon. The following five new synonymies are proposed (with junior synonym listed first): Bembidion (Peryphanes) dostali Kirschenhofer, 1984 = Bembidion (Peryphanes) sanatum Bates, 1883 ; Bembidion (Terminophanes) pseudoconsumatum Kirschenhofer, 1984 = Bembidion (Terminophanes) sjoelanderi Jedlička, 1965 ; Bembidion (Asioperyphus) sapporense Jedlička, 1951 = Bembidion (Politophanes) chloreum Bates, 1873 ; Bembidion (Peryphus) torosiense Jedlička, 1961 = Bembidion (Peryphus) subcostatum vau Netolitzky, 1913 ; Sinechostictus (Sinechostictus) multisulcatus cariniger Korge, 1971 = Sinechostictus (Sinechostictus) multisulcatus (Reitter, 1890) .

() sp. nov. from Iran (Coleoptera, Carabidae, Bembidiina).

Bembidion (Ocydromus) terryerwini from Central Iran (Kerman and Yazd Provinces), described here, belongs to the species group (Ocydromus Clairville, 1806). The new species is compared with the other taxa of this species group occurring in Iran and neighboring regions (Georgia, Armenia, Azerbaijan, Turkey, Iraq, Iran, South Pakistan, Afghanistan, and Turkmenistan).

Automatic Calibration of a Two-Axis Rotary Table for 3D Scanning Purposes.

Rotary tables are often used to speed up the acquisition time during the 3D scanning of complex geometries. In order to avoid manual registration of the point clouds acquired with different orientations, automatic algorithms to compensate the rotation were developed. Alternatively, a proper calibration of the rotary axis with respect to the camera system is needed.

Sensor Architectures and Technologies for Upper Limb 3D Surface Reconstruction: A Review.

3D digital models of the upper limb anatomy represent the starting point for the design process of bespoke devices, such as orthoses and prostheses, which can be modeled on the actual patient's anatomy by using CAD (Computer Aided Design) tools. The ongoing research on optical scanning methodologies has allowed the development of technologies that allow the surface reconstruction of the upper limb anatomy through procedures characterized by minimum discomfort for the patient. However, the 3D optical scanning of upper limbs is a complex task that requires solving problematic aspects, such as the difficulty of keeping the hand in a stable position and the presence of artefacts due to involuntary movements.

Semi-Automatic Tool for Vitiligo Detection and Analysis.

Vitiligo vulgaris is an autoimmune disease which causes a strong reduction of the cells producing melanin, which is the main skin pigment. This results in the growth of white patches on patients' skin, which are more or less visible, depending on the skin phototype. Precise, objective and fast detection of vitiligo patches would be crucial to produce statistically relevant data on huge populations, thus giving an insight on the disease.

An Omnidirectional Vision Sensor Based on a Spherical Mirror Catadioptric System.

The combination of mirrors and lenses, which defines a catadioptric sensor, is widely used in the computer vision field. The definition of a catadioptric sensors is based on three main features: hardware setup, projection modelling and calibration process. In this paper, a complete description of these aspects is given for an omnidirectional sensor based on a spherical mirror.

Design and manufacturing of patient-specific orthodontic appliances by computer-aided engineering techniques.

Orthodontic treatments are usually performed using fixed brackets or removable oral appliances, which are traditionally made from alginate impressions and wax registrations. Among removable devices, eruption guidance appliances are used for early orthodontic treatments in order to intercept and prevent malocclusion problems. Commercially available eruption guidance appliances, however, are symmetric devices produced using a few standard sizes.

Environmental and human health assessment of life cycle of nanoTiO functionalized porcelain stoneware tile.

Recently, there has been a rise in the interest in nanotechnology due to its enormous potential for the development of new products and applications with higher performance and new functionalities. However, while nanotechnology might revolutionize a number of industrial and consumer sectors, there are uncertainties and knowledge gaps regarding toxicological effects of this emerging science. The goal of this research concerns the implementation into Life Cycle Assessment (LCA) of preliminary frameworks developed to evaluate human toxicity and exposure factors related to the potential nanoparticle releases that could occur during the life cycle steps of a functionalized building material.

Stable peptide inhibitors prevent binding of lethal and oedema factors to protective antigen and neutralize anthrax toxin in vivo.

The lethal and oedema toxins produced by Bacillus anthracis, the aetiological agent of anthrax, are made by association of protective antigen with lethal and oedema factors and play a major role in the pathogenesis of anthrax. In the present paper, we describe the production of peptide-based specific inhibitors in branched form which inhibit the interaction of protective antigen with lethal and oedema factors and neutralize anthrax toxins in vitro and in vivo. Anti-protective antigen peptides were selected from a phage library by competitive panning with lethal factor.

Selective occlusion of tumor blood vessels by targeted delivery of an antibody-photosensitizer conjugate.

The irregular vasculature and high interstitial pressure of solid tumors hinder the delivery of cytotoxic agents to cancer cells. As a consequence, the doses of chemotherapy necessary to achieve complete tumor eradication are associated with unacceptably high toxicities. The selective thrombosis of tumor blood vessels has been postulated as an alternative avenue for combating cancer, depriving tumors of nutrients and oxygen and causing an avalanche of tumor cell deaths.

Antimicrobial activity of novel dendrimeric peptides obtained by phage display selection and rational modification.

A large 10-mer phage peptide library was panned against whole Escherichia coli cells, and an antimicrobial peptide (QEKIRVRLSA) was selected. The peptide was synthesized in monomeric and dendrimeric tetrabranched form (multiple antigen peptide [MAP]), which generally allows a dramatic increase of peptide stability to peptidases and proteases. The antibacterial activity of the dendrimeric peptide against E.

NMR and MD studies on the interaction between ligand peptides and alpha-bungarotoxin.

The interaction between alpha-bungarotoxin and linear synthetic peptides, mimotope of the nicotinic acetylcholine receptor binding site, has been characterised extensively by several methods and a wealth of functional, kinetic and structural data are available. Hence, this system represents a suitable model to explore in detail the dynamics of a peptide-protein interaction. Here, the solution structure of a new complex of the protein toxin with a tridecapeptide ligand exhibiting high affinity has been determined by NMR.

Therapeutic activity of an engineered synthetic killer antiidiotypic antibody fragment against experimental mucosal and systemic candidiasis.

Peptides derived from the sequence of a single-chain, recombinant, antiidiotypic antibody (IdAb; KT-scFv) acting as a functional internal image of a microbicidal, wide-spectrum yeast killer toxin (KT) were synthesized and studied for their antimicrobial activity by using the KT-susceptible Candida albicans as model organism. A decapeptide containing the first three amino acids (SAS) of the light chain CDR1 was selected and optimized by alanine replacement of a single residue. This peptide exerted a strong candidacidal activity in vitro, with a 50% inhibitory concentration of 0.

Interaction of angiotensin II with the C-terminal 300-320 fragment of the rat angiotensin II receptor AT1a monitored by NMR.

Interaction between angiotensin II (Ang II) and the fragment peptide 300-320 (fCT300-320) of the rat angiotensin II receptor AT1a was demonstrated by relaxation measurements, NOE effects, chemical shift variations, and CD measurements. The correlation times modulating dipolar interactions for the bound and free forms of Ang II were estimated by the ratio of the nonselective and single-selective longitudinal relaxation rates. The intermolecular NOEs observed in NOESY spectra between HN protons of 9Lys(fCT) and 6His(ang), 10Phe(fCT) and 8Phe(ang), HN proton of 3Tyr(fCT) and Halpha of 4Tyr(ang), 5Phe(fCT)Hdelta and Halpha of 4Tyr(ang) indicated that Ang II aromatic residues are directly involved in the interaction, as also verified by relaxation data.

Synthetic peptides in the form of dendrimers become resistant to protease activity.

In previous papers, we observed that dendrimers of peptide mimotopes of the nicotinic receptor ligand site are strong antidotes against the lethality of the nicotinic receptor ligand alpha-bungarotoxin. Although their in vitro activity is identical to that of dendrimers, the corresponding monomeric peptide mimotopes are not effective in vivo. Because the higher in vivo efficiency of dendrimers could not in this case be related to polyvalent interaction, the stability to blood protease activity of monomeric versus tetrabranched dendrimeric mimotope peptides was compared here by incubating three different mimotopes with human plasma and serum.

Involvement of oxidative stress in apoptosis induced by a mixture of isothiazolinones in normal human keratinocytes.

A 3:1 combination of 5-chloro-2-methyl-4-isothiazolin-3-one (CMI) and 2-methyl-4-isothiazolin-3-one (MI) is widely used to preserve cosmetic products. We show here that CMI/MI induced apoptosis in normal human keratinocytes (NHK) as at low concentrations (0.001-0.

Rational design and molecular diversity for the construction of anti-alpha-bungarotoxin antidotes with high affinity and in vivo efficiency.

The structure of peptide p6.7, a mimotope of the nicotinic receptor ligand site that binds alpha-bungarotoxin and neutralizes its toxicity, was compared to that of the acetylcholine binding protein. The central loop of p6.

Biochemical filtering of a protein-protein docking simulation identifies the structure of a complex between a recombinant antibody fragment and alpha-bungarotoxin.

The structural characterization of a complex of alpha-bungarotoxin with a recombinant antibody fragment that mimics the acetylcholine receptor was achieved using docking simulation procedures. To drive the computer simulation towards a limited set of solutions with biological significance, a filter, incorporating general considerations of antigen-antibody interactions, specificity of the selected antibody fragment and results from alpha-bungarotoxin epitope mapping, was adopted. Two similar structures were obtained for the complex, both of them stabilized by cation-pi and hydrophobic interactions due to tyrosilyl residues of the antibody fragment.