Correction: Pakhomova et al. High-Entropy Diborides-Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. , , 718.

In the original publication [...

High-Entropy Diborides-Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study.

The reactive spark plasma sintering (R-SPS) method was compared in this work with the two-step SHS-SPS route, based on the combination of the self-propagating high-temperature synthesis (SHS) with the SPS process, for the fabrication of dense (HfMoTiTaNb)B-SiC and (HfMoTiTaZr)B-SiC ceramics. A multiphase and inhomogeneous product, containing various borides, was obtained at 2000 °C/20 min by R-SPS from transition metals, BC, and Si. In contrast, if the same precursors were first reacted by SHS and then processed by SPS under the optimized condition of 1800 °C/20 min, the desired ceramics were successfully attained.

Assessment of Metallurgical and Mechanical Properties of Welded Joints via Numerical Simulation and Experiments.

Welding has been the most important joining technique applied to metallic materials since the early twentieth century when arc welding was introduced [...

Rapid Calculation of Residual Stresses in Dissimilar S355-AA6082 Butt Welds.

An analytical model is proposed to rapidly capture the thermal and residual stresses values induced by the hybrid metal extrusion and bonding (HYB) process on dissimilar-metal butt-welded joints. The power input for two welding velocities is first assessed using a thermal-mechanical model solved by a heat generation routine written in MATLAB code. Subsequently, the obtained temperature history is used as input to solve the equilibrium and compatibility equations formulated to calculate the thermal and residual stresses.

Residual Notch Stress Intensity Factors in Welded Joints Evaluated by 3D Numerical Simulations of Arc Welding Processes.

Approaches based on calculating Residual Notch Stress Intensity Factors (R-NSIFs) assume the weld toe to be a sharp V-notch that gives rise to a residual singular stress distribution close to the weld toe. Once R-NSIFs are determined, they might be included in local fatigue criteria for the structural strength assessment of welded joints based on NSIFs due to external cyclic loading. However, the numerical calculation of R-NSIFs through finite element (FE) simulations of the welding process requires extremely refined meshes to properly capture the residual stress singularity.

A Semi-Analytical Model for the Heat Generation during Hybrid Metal Extrusion and Bonding (HYB).

Hybrid Metal Extrusion and Bonding (HYB) is a novel solid-state welding method for metals and alloys that utilises continuous extrusion as a technique to enable aluminium filler metal additions. In the present study, a new semi-analytical model for the heat generation during aluminium butt welding is presented. As a starting point, the classical Rosenthal thin plate solution for the pseudo-steady-state temperature distribution around a fully penetrating line source is invoked.

The effect of Equal Channel Angular Pressing on the stress corrosion cracking susceptibility of AZ31 alloy in simulated body fluid.

Despite the great potential of Mg and its alloys as material for biodegradable implants, their low resistance to the simultaneous action of corrosion and mechanical stresses in the human body have hampered their use. Stress Corrosion Cracking has been reported as one of the most critical failure modes to overcome to allow such materials to be clinically applied. Thus, in this paper we investigate the effect of Equal Channel Angular Pressing (ECAP) on the Stress Corrosion Cracking (SCC) susceptibility of the AZ31 Mg alloy.

Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping.

The fatigue behavior and fracture mechanisms of additively manufactured Ti-6Al-4V specimens are investigated in this study. Three sets of testing samples were fabricated for the assessment of fatigue life. The first batch of samples was built by using Laser-Engineered Net Shaping (LENS) technology, a Direct Energy Deposition (DED) method.

Strain Evolution in Cold-Warm Forged Steel Components Studied by Means of EBSD Technique.

Electron BackScatter Diffraction (EBSD) in conjunction with Field-Emission Environmental Scanning Electron Microscopy (FEG-ESEM) has been used to evaluate the microstructural and local plastic strain evolution in different alloys (AISI 1005, AISI 304L and Duplex 2205) deformed by a single-stage cold and warm forging process. The present work is aimed to describe the different behavior of the austenite and ferrite during plastic deformation as a function of different forging temperatures. Several topological EBSD maps have been measured on the deformed and undeformed states.

Immunomodulation of TGF-beta 1 in mdx mouse inhibits connective tissue proliferation in diaphragm but increases inflammatory response: implications for antifibrotic therapy.

Irreversible connective tissue proliferation in muscle is a pathological hallmark of Duchenne muscular dystrophy (DMD), a genetic degenerative muscle disease due to lack of the sarcolemmal protein dystrophin. Focal release of transforming growth factor-beta1 (TGF-beta1) is involved in fibrosis development. Murine muscular dystrophy (mdx) is genetically homologous to DMD and histopathological alterations comparable to those in DMD muscles occur in diaphragm of older mdx mice.

First evaluation of the potential effectiveness in muscular dystrophy of a novel chimeric compound, BN 82270, acting as calpain-inhibitor and anti-oxidant.

BN 82270 is a membrane-permeable prodrug of a chimeric compound (BN 82204) dually acting as calpain inhibitor and anti-oxidant. Acute in vivo injection of dystrophic mdx mice (30 mg/kg, s.c.