Investigations into the characterization, degradation, and applications of biodegradable polymers by mass spectrometry.

Biodegradable polymers have been getting more and more attention because of their contribution to the plastic pollution environmental issues and to move towards a circular economy. Nevertheless, biodegradable materials still exhibit various disadvantages restraining a widespread use in the market. Therefore, additional research efforts are required to improve their performance.

Matrix-Assisted Laser Desorption and Electrospray Ionization Tandem Mass Spectrometry of Microbial and Synthetic Biodegradable Polymers.

The in-depth structural and compositional investigation of biodegradable polymeric materials, neat or partly degraded, is crucial for their successful applications. Obviously, an exhaustive structural analysis of all synthetic macromolecules is essential in polymer chemistry to confirm the accomplishment of a preparation procedure, identify degradation products originating from side reactions, and monitor chemical-physical properties. Advanced mass spectrometry (MS) techniques have been increasingly applied in biodegradable polymer studies with a relevant role in their further development, valuation, and extension of application fields.

Calix[4]arene Derivative for Iodine Capture and Effect on Leaching of Iodine through Packaging.

A hydrophobic calix[4]arene derivative was investigated for its iodine (I) capture efficiency from gaseous and liquid phase. The iodine uptake was followed by UV-vis spectroscopy. Additionally, the influence of the calix[4]arene derivative-polyolefin system on the leaching of iodine through packaging from a povidone-iodine-based (PVP-I) formulation was evaluated.

Synthesis, Characterization, and Soil Burial Degradation of Biobased Polyurethanes.

There is an urgent need for developing degradable polymeric systems based on bio-derived and sustainable materials. In recent years, polyurethanes derived from castor oil have emerged due to the large availability and sustainable characteristics of castor oil. However, these polymers are normally prepared through tedious and/or energy-intensive procedures or using high volatile and/or toxic reagents such as volatile isocyanates or epoxides.

Influence of Calcium Carbonate Nanoparticles on the Soil Burial Degradation of Polybutyleneadipate-Co-Butylenetherephthalate Films.

A polybutyleneadipate-co-butylenetherephthalate (PBAT) sample, commercially known as Ecoflex, was processed via melt extrusion with CaCO nanoparticles coated with a hydrophobic coating. Blown films of PBAT and two composites with nanofiller (2% and 5%wt) were prepared and degradation tests in soil at 30 °C up to 180 days were carried out with weight loss measurements. Furthermore, biodegradation test according to ISO 14851 was carried out at 30 °C.

Sequencing Biodegradable and Potentially Biobased Polyesteramide of Sebacic Acid and 3-Amino-1-propanol by MALDI TOF-TOF Tandem Mass Spectrometry.

Biodegradable and potentially biobased polyesteramide oligomers (PEA-Pro), obtained from melt condensation of sebacic acid and 3-amino-1-propanol, were characterized by nuclear magnetic resonance (NMR), matrix assisted laser desorption/ionization-time of flight/time of flight-mass spectrometry/mass spectrometry (MALDI-TOF/TOF-MS/MS), thermogravimetric analysis (TGA), and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). NMR analysis showed the presence of hydroxyl and amino terminal groups as well as carboxylic groups of the sebacate moiety. Hydroxyl and carboxyl termination had the same abundance, while the amine termination was 2.

Compostable Polylactide and Cellulose Based Packaging for Fresh-Cut Cherry Tomatoes: Performance Evaluation and Influence of Sterilization Treatment.

For food packaging, plastic materials display large appeal, mostly due to their versatility, mechanical, optical and barrier properties. However, they play an important role in environmental concerns and waste management issue. Compostable bioplastics represent alternative materials designed for a lower environmental impact.

Comparative Investigation on the Soil Burial Degradation Behaviour of Polymer Films for Agriculture before and after Photo-Oxidation.

Polymer films based on biodegradable polymers, polyethylene (PE) and modified PE with oxo-degradable additive were prepared by film blowing. Carbon black (1%) was added to all the films. Commercial biodegradable Ecovio and Mater-Bi samples were used.

Mass spectrometry in bioresorbable polymer development, degradation and drug-release tracking.

A detailed characterization of polymeric matrices and appropriate degradation monitoring techniques are required to sustain the development of new materials as well as to enlarge the applications of the old ones. In fact, polymer analysis is essential for the clarification of the intrinsic relationship between structure and properties that ascertains the industrial applications in diverse fields. In bioresorbable and biodegradable polymers, the role of analytical methods is dual since it is pointed both at the polymeric matrices and at degradation tracking.

Photo-Oxidative and Soil Burial Degradation of Irrigation Tubes Based on Biodegradable Polymer Blends.

Irrigation tubes based on biodegradable polymers were prepared via an extrusion-drawing process by Irritec and compared to conventional pipes made of high-density polyethylene (HDPE). A commercial polylactide/poly (butyleneadipate--butyleneterephthalate) (PLA/PBAT) blend (Bio-Flex) and Mater-Bi were used. The polymers were characterized from rheological and mechanical points of view.

Modern mass spectrometry in the characterization and degradation of biodegradable polymers.

In the last decades, the solid-waste management related to the extensively growing production of plastic materials, in concert with their durability, have stimulated increasing interest in biodegradable polymers. At present, a variety of biodegradable polymers has already been introduced onto the market and can now be competitive with non biodegradable thermoplastics in different fields (packaging, biomedical, textile, etc.).

Matrix-assisted laser desorption ionization time-of-flight/time-of-flight tandem mass spectra of biodegradable polybutylenesuccinate.

Rationale: Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight/Time-Of-Flight Tandem Mass Spectrometry (MALDI-TOF MS/MS) was employed to analyze five poly(butylene succinate) (PBSu) oligomers and to investigate their fragmentation pathways.

Methods: MALDI-TOF MS/MS analysis was performed on cyclic and linear oligomers terminated by dicarboxyl groups, carboxyl and hydroxyl groups, hydroxyl and olefin groups, and dihydroxyl groups. The sodium adduct ions of these oligomers were selected as precursor ions.

Direct electrospray ionization mass spectrometry quantitative analysis of sebacic and terephthalic acids in biodegradable polymers.

A direct, rapid, and easy electrospray ionization mass spectrometry (ESI-MS) method to determine concentrations of sebacic acid (SA) and terephthalic acid (TA) residues in biodegradable copolymers was developed. Copolyester samples were synthesized from 1,4-butanediol and sebacic and terephthalic acids by melt polymerization. Extraction of monomers was performed in methanol.

Structural characterization of synthetic poly(ester amide) from sebacic acid and 4-amino-1-butanol by matrix-assisted laser desorption ionization time-of-flight/time-of-flight tandem mass spectrometry.

Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry (MALDI-TOF/TOF-MS/MS) was employed to analyze a poly(ester amide) sample (PEA-Bu) from the melt condensation of sebacic acid and 4-amino-1-butanol. In particular, we investigated the fragmentation pathways, the ester/amide bond sequences and the structure of species derived from side reactions during the synthesis. MALDI-TOF/TOF-MS/MS analysis was performed on cyclic species and linear oligomers terminated by dicarboxyl groups, carboxyl and hydroxyl groups and diamino alcohol groups.

Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectra of poly(butylene adipate).

Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry (MALDI-TOF/TOF-MS/MS) was employed to analyze four poly(butylene adipate) (PBAd) oligomers and to investigate their fragmentation pathways as a continuation of our work on the MALDI-TOF/TOF-MS/MS study of synthetic polymers. MALDI-TOF/TOF-MS/MS analysis was performed on oligomers terminated by carboxyl and hydroxyl groups, methyl adipate and hydroxyl groups, dihydroxyl groups, and dicarboxyl groups. The sodium adducts of these oligomers were selected as precursor ions.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry with size-exclusion chromatographic fractionation for structural characterization of synthetic aliphatic copolyesters.

We report matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and off-line coupling of size-exclusion chromatography with MALDI-TOFMS analysis (SEC/MALDI-TOFMS) methods for the detailed characterization of poly[(R,S)-3-hydroxybutyrate-co-L-lactic acid], P[(R,S)-3HB-co-LA], and poly[(R,S)-3-hydroxybutyrate-co-epsilon-caprolactone], P[(R,S)-3HB-co-CL], copolymer samples which are expected to be used in special medical application as scaffolds for cartilage and soft tissue engineering. The novel copolyesters contained randomly distributed (R,S)-3-hydroxybutyrate structural units, were synthesized by transesterification of the corresponding homopolymers, i.e.

Sequence determination in aliphatic poly(ester amide)s by matrix-assisted laser desorption/ionization time-of-flight and time-of-flight/time-of-flight tandem mass spectrometry.

Poly(ester amide)s from dimethyl sebacate or sebacic acid and 2-aminoethanol or 4-amino-1-butanol were characterized by post-source decay matrix-assisted laser desorption/ionization time-of-flight (PSD-MALDI-TOF) and time-of-flight/time-of-flight tandem mass spectrometry (MALDI-TOF/TOF-MS/MS). Sodiated oligomers were selected as precursor ions for dissociation studies. PSD analysis was performed on dimethyl sebacate, dicarboxylic, carboxylic and amino alcohol, and diamino alcohol terminated oligomers.

Evidence for selective hydrolysis of aliphatic copolyesters induced by lipase catalysis.

High molar mass random poly(butylene succinate-co-butylene sebacate), P(BS-co-BSe), and poly(butylene succinate-co-butylene adipate), P(BS-co-BA), with different composition, were synthesized and subjected to enzymatic hydrolysis by Lipase from Mucor miehei or from Rhizopus arrhizus. The enzymatic hydrolysis of P(BS-co-BSe)s and P(BS-co-BA)s films produced a mixture of water-soluble monomers and co-oligomers that were separated and identified by on-line high performance liquid chromatography/electrospray ionization mass spectrometry (HPLC/ESI-MS). Optimization of the HPLC analysis allowed the separation of isobar co-oligomers, differing only for the co-monomers sequence.