Investigations by AFM of Ageing Mechanisms in PLA-Flax Fibre Composites during Garden Composting.

PLA-flax non-woven composites are promising materials, coupling high performance and possible degradation at their end of life. To explore their ageing mechanisms during garden composting, microstructural investigations were carried out through scanning electron microscopy (SEM) and atomic force microscopy (AFM). We observe that flax fibres preferentially degrade 'inwards' from the edge to the core of the composite.

A Review of Permeability and Flow Simulation for Liquid Composite Moulding of Plant Fibre Composites.

Liquid composite moulding (LCM) of plant fibre composites has gained much attention for the development of structural biobased composites. To produce quality composites, better understanding of the resin impregnation process and flow behaviour in plant fibre reinforcements is vital. By reviewing the literature, we aim to identify key plant fibre reinforcement-specific factors that influence, if not govern, the mould filling stage during LCM of plant fibre composites.

Cordon-Bleu uses WH2 domains as multifunctional dynamizers of actin filament assembly.

Cordon-Bleu is, like Spire, a member of the growing family of WH2 repeat proteins, which emerge as versatile regulators of actin dynamics. They are expressed in morphogenetic and patterning processes and nucleate actin assembly in vitro. Here, we show that Cordon-Bleu works as a dynamizer of actin assembly by combining many properties of profilin with weak filament nucleating and powerful filament severing activities and sequestration of ADP-actin, which altogether generate oscillatory polymerization kinetics.

How ATP hydrolysis controls filament assembly from profilin-actin: implication for formin processivity.

Formins catalyze rapid filament growth from profilin-actin, by remaining processively bound to the elongating barbed end. The sequence of elementary reactions that describe filament assembly from profilin-actin at either free or formin-bound barbed ends is not fully understood. Specifically, the identity of the transitory complexes between profilin and actin terminal subunits is not known; and whether ATP hydrolysis is directly or indirectly coupled to profilin-actin assembly is not clear.

Mammalian twinfilin sequesters ADP-G-actin and caps filament barbed ends: implications in motility.

Twinfilins are conserved actin-binding proteins composed of two actin depolymerizing factor homology (ADF-H) domains. Twinfilins are involved in diverse morphological and motile processes, but their mechanism of action has not been elucidated. Here, we show that mammalian twinfilin both sequesters ADP-G-actin and caps filament barbed ends with preferential affinity for ADP-bound ends.

Formin is a processive motor that requires profilin to accelerate actin assembly and associated ATP hydrolysis.

Motile and morphogenetic cellular processes are driven by site-directed assembly of actin filaments. Formins, proteins characterized by formin homology domains FH1 and FH2, are initiators of actin assembly. How formins simply bind to filament barbed ends in rapid equilibrium or find free energy to become a processive motor of filament assembly remains enigmatic.

How VASP enhances actin-based motility.

The function of vasodilator-stimulated phosphoprotein (VASP) in motility is analyzed using a biomimetic motility assay in which ActA-coated microspheres propel themselves in a medium containing actin, the Arp2/3 complex, and three regulatory proteins in the absence or presence of VASP. Propulsion is linked to cycles of filament barbed end attachment-branching-detachment-growth in which the ActA-activated Arp2/3 complex incorporates at the junctions of branched filaments. VASP increases the velocity of beads.

Actin-based motility as a self-organized system: mechanism and reconstitution in vitro.

Site-directed actin polymerisation in response to signalling is responsible for the formation of cell protrusions. These elementary 'actin-based motility processes' are involved in cell locomotion, cell metastasis, organ morphogenesis and microbial pathogenesis. We have reconstituted actin-based propulsive movement of particles of various sizes and geometries (rods, microspheres) in a minimum motility medium containing five pure proteins.

ATP hydrolysis on actin-related protein 2/3 complex causes debranching of dendritic actin arrays.

Extension of lamellipodia, an important dissipative process in cell motility, is driven by the turnover of a polarized dendritic array of actin filaments. Motility is driven by catalytic cycles of filament attachment to Wiskott-Aldrich syndrome protein (WASP)-activated actin-related protein (Arp)2/3 complex at the leading edge, branch formation, and detachment, allowing subsequent growth of branched filaments. The morphology, mechanical strength, and lifetime of the array are determined by the processes of filament branching, debranching, and treadmilling.

Actin-based motility: from molecules to movement.

Extensive progress has been made recently in understanding the mechanism by which cells move and extend protrusions using site-directed polymerization of actin in response to signalling. Insights into the molecular mechanism of production of force and movement by actin polymerization have been provided by a crosstalk between several disciplines, including biochemistry, biomimetic approaches and computational studies. This review focuses on the biochemical properties of the proteins involved in actin-based motility and shows how these properties are used to generate models of force production, how the predictions of different theoretical models are tested using a biochemically controlled reconstituted motility assay and how the changes in motility resulting from changes to the concentrations of components of the assay can help understand diverse aspects of the motile behavior of living cells.

A biomimetic motility assay provides insight into the mechanism of actin-based motility.

Abiomimetic motility assay is used to analyze the mechanism of force production by site-directed polymerization of actin. Polystyrene microspheres, functionalized in a controlled fashion by the N-WASP protein, the ubiquitous activator of Arp2/3 complex, undergo actin-based propulsion in a medium that consists of five pure proteins. We have analyzed the dependence of velocity on N-WASP surface density, on the concentration of capping protein, and on external force.

The effect of stathmin phosphorylation on microtubule assembly depends on tubulin critical concentration.

Stathmin is a phosphorylation-regulated tubulin-binding protein. In vitro and in vivo studies using nonphosphorylatable and pseudophosphorylated mutants of stathmin have questioned the view that stathmin might act only as a tubulin-sequestering factor. Stathmin was proposed to effectively regulate microtubule dynamic instability by increasing the frequency of catastrophe (the transition from steady growth to rapid depolymerization), without interacting with tubulin.

Activation of Arp2/3 complex by Wiskott-Aldrich Syndrome protein is linked to enhanced binding of ATP to Arp2.

In response to signaling, the Arp2/3 complex (actin-related proteins 2 and 3 complex) is activated by binding the C-terminal (WA) domain of proteins of the Wiskott-Aldrich Syndrome family to promote the formation of a branched actin filament array, responsible for cell protrusion. The Arp2/3 complex exists in different structural/functional states: the inactive Arp2/3, the activated WA.Arp2/3 complex, the ternary G-actin.

Mechanism of actin-based motility.

Spatially controlled polymerization of actin is at the origin of cell motility and is responsible for the formation of cellular protrusions like lamellipodia. The pathogens Listeria monocytogenes and Shigella flexneri, which undergo actin-based propulsion, are acknowledged models of the leading edge of lamellipodia. Actin-based motility of the bacteria or of functionalized microspheres can be reconstituted in vitro from only five pure proteins.

Stathmin slows down guanosine diphosphate dissociation from tubulin in a phosphorylation-controlled fashion.

Stathmin is an important protein that interacts with tubulin and regulates microtubule dynamics in a phosphorylation-controlled fashion. Here we show that the dissociation of guanosine 5'-diphosphate (GDP) from beta-tubulin is slowed 20-fold in the (tubulin)(2)-stathmin ternary complex (T(2)S). The kinetics of GDP or guanosine 5'-triphosphate (GTP) dissociation from tubulin have been monitored by the change in tryptophan fluorescence of tubulin upon exchanging 2-amino-6-mercapto-9-beta-ribofuranosylpurine 5'-diphosphate (S6-GDP) for tubulin-bound guanine nucleotide.

The Arp2/3 complex branches filament barbed ends: functional antagonism with capping proteins.

The Arp2/3 complex is an essential regulator of actin polymerization in response to signalling and generates a dendritic array of filaments in lamellipodia. Here we show that the activated Arp2/3 complex interacts with the barbed ends of filaments to initiate barbed-end branching. Barbed-end branching by Arp2/3 quantitatively accounts for polymerization kinetics and for the length correlation of the branches of filaments observed by electron microscopy.

GRB2 links signaling to actin assembly by enhancing interaction of neural Wiskott-Aldrich syndrome protein (N-WASp) with actin-related protein (ARP2/3) complex.

Proteins of the Wiskott-Aldrich Syndrome protein (WASp) family connect signaling pathways to the actin polymerization-driven cell motility. The ubiquitous homolog of WASp, N-WASp, is a multidomain protein that interacts with the Arp2/3 complex and G-actin via its C-terminal WA domain to stimulate actin polymerization. The activity of N-WASp is enhanced by the binding of effectors like Cdc42-guanosine 5'-3-O-(thio)triphosphate, phosphatidylinositol bisphosphate, or the Shigella IcsA protein.

Monomeric gamma -tubulin nucleates microtubules.

gamma-Tubulin is required for nucleation and polarized organization of microtubules in vivo. The mechanism of microtubule nucleation by gamma-tubulin and the role of associated proteins is not understood. Here we show that in vitro translated monomeric gamma-tubulin nucleates microtubules by lowering the size of the nucleus from seven to three tubulin subunits.

Reconstitution of actin-based motility of Listeria and Shigella using pure proteins.

Actin polymerization is essential for cell locomotion and is thought to generate the force responsible for cellular protrusions. The Arp2/3 complex is required to stimulate actin assembly at the leading edge in response to signalling. The bacteria Listeria and Shigella bypass the signalling pathway and harness the Arp2/3 complex to induce actin assembly and to propel themselves in living cells.

Activation of the CDC42 effector N-WASP by the Shigella flexneri IcsA protein promotes actin nucleation by Arp2/3 complex and bacterial actin-based motility.

To propel itself in infected cells, the pathogen Shigella flexneri subverts the Cdc42-controlled machinery responsible for actin assembly during filopodia formation. Using a combination of bacterial motility assays in platelet extracts with Escherichia coli expressing the Shigella IcsA protein and in vitro analysis of reconstituted systems from purified proteins, we show here that the bacterial protein IcsA binds N-WASP and activates it in a Cdc42-like fashion. Dramatic stimulation of actin assembly is linked to the formation of a ternary IcsA-N-WASP-Arp2/3 complex, which nucleates actin polymerization.