Hydrophobization of Cold Plasma Activated Glass Surfaces by Hexamethyldisilazane Treatment.

The objective of this study was to investigate the modification of glass surfaces by the synergistic combination of cold plasma and chemical surface modification techniques. Glass surface hydrophobicity was obtained as a result of various plasma and deposition operational conditions. The mechanisms governing the hydrophobization process were also studied.

Hemostatic dressings based on poly(vinyl formal) sponges.

The development of novel hemostatic agents is related to the fact that severe blood loss due to hemorrhage continues to be the leading cause of preventable death of patients with military trauma and the second leading cause of death of civilian patients with injuries. Herein we assessed the hemostatic properties of porous sponges based on biocompatible hydrophilic polymer, poly(vinyl formal) (PVF), which meets the main requirements for the development of hemostatic materials. A series of composite hemostatic materials based on PVF sponges with different porosities and fillers were synthesized by acetalization of poly(vinyl alcohol) with formaldehyde.

Nanostructured Amorphous Silicas Hydrophobized by Various Pathways.

Various nanostructured amorphous silicas [fumed silicas such as crude (A-300), hydro-compacted (cA-300, TS 100), and precipitated silica Syloid 244] were modified by different polydimethylsiloxanes such as PDMS5, PDMS100, PDMS200, PDMS1000, and PDMS12500 (the label numbers show the viscosity (η) values) using dimethyl carbonate (DMC) as a siloxane-bond-breaking reagent. In addition, hexamethyldisilazane was used to modify fumed silica cA-300. The nanocomposites were characterized using microscopy, infrared spectroscopy, thermodesorption, nitrogen adsorption-desorption, solid-state NMR spectroscopy, small-angle X-ray scattering, and zeta-potential methods.

Nanostructured Polymethylsiloxane/Fumed Silica Blends.

Polymethylsiloxane (PMS) and fumed silica, alone and in a blended form (1:1 w/w), differently pretreated, hydrated, and treated again, were studied using TEM and SEM, nitrogen adsorption-desorption, H MAS and Si CP/MAS NMR spectroscopy, infrared spectroscopy, and methods of quantum chemistry. Analysis of the effects of adding water (0-0.5 g of water per gram of solids) to the blends while they are undergoing different mechanical treatment (stirring with weak (~1-2 kg/cm) and strong (~20 kg/cm) loading) show that both dry and wetted PMS (as a soft material) can be grafted onto a silica surface, even with weak mechanical loading, and enhanced mechanical loading leads to enhanced homogenization of the blends.

Polymethylsiloxane alone and in composition with nanosilica under various conditions.

Disperse polymethylsiloxane (PMS) alone and in a mixture with highly disperse nanosilica A-300 was studied as a dry powder and a hydrogel located in various dispersion media (air, chloroform alone and with addition of trifluoroacetic acid) using low-temperature H NMR spectroscopy, cryoporometry, thermogravimetry, nitrogen adsorption, microscopy, infrared spectroscopy, and quantum chemistry. The powders of dried PMS and PMS/A-300 can be easily rehydrated upon strong stirring with added water. The slurry properties depend on mechanical treatment features due to stronger compaction of the secondary structures with increasing mechanical loading.

Water Interactions with Hydrophobic versus Hydrophilic Nanosilica.

It is well-known that interaction of hydrophobic powders with water is weak, and upon mixing, they typically form separated phases. Preparation of hydrophobic nanosilica AM1 with a relatively large content of bound water with no formation of separated phases was the aim of this study. Unmodified nanosilica A-300 and initial AM1 (A-300 completely hydrophobized by dimethyldichlorosilane), compacted A-300 (cA-300), and compacted AM1 (cAM1) containing 50-58 wt % of bound water were studied using low-temperature H NMR spectroscopy, thermogravimetry, infrared spectroscopy, microscopy, small-angle X-ray scattering, nitrogen adsorption, and theoretical modeling.

Nanosilica modified by polydimethylsiloxane depolymerized and chemically bound to nanoparticles or physically bound to unmodified or modified surfaces: Structure and interfacial phenomena.

Three polydimethylsiloxanes (PDMS200, PDMS1000, and PDMS12500 with numbers showing the viscosity values dependent on the molecular weight) were used for adsorption (14-95 wt% PDMS) onto unmodified and PDMS-modified (16.7 wt% PDMS using dimethyl carbonate (DMC) as a siloxane bond breaking reagent) nanosilica A-300. The materials were studied using microscopy, infrared spectroscopy, thermodesorption, calorimetry, ethanol and water/ethanol evaporation, nitrogen adsorption-desorption, and quantum chemical methods.

A New Route for Preparation of Hydrophobic Silica Nanoparticles Using a Mixture of Poly(dimethylsiloxane) and Diethyl Carbonate.

Organosilicon layers chemically anchored on silica surfaces show high carbon content, good thermal and chemical stability and find numerous applications as fillers in polymer systems, thickeners in dispersing media, and as the stationary phases and carriers in chromatography. Methyl-terminated poly(dimethylsiloxanes) (PDMSs) are typically considered to be inert and not suitable for surface modification because of the absence of readily hydrolyzable groups. Therefore, in this paper, we report a new approach for surface modification of silica (SiO₂) nanoparticles with poly(dimethylsiloxanes) with different lengths of polymer chains (PDMS-20, PDMS-50, PDMS-100) in the presence of diethyl carbonate (DEC) as initiator of siloxane bond splitting.

Synthesis and Examination of Nanocomposites Based on Poly(2-hydroxyethyl methacrylate) for Medicinal Use.

Preparation of poly(2-hydroxyethyl methacrylate) (PHEMA) based nanocomposites using different approaches such as synthesis with water as the porogen, filling of polymer matrix by silica and formation of interpenetrating polymer networks with polyurethane was demonstrated. Incorporation of various biologically active compounds (BAC) such as metronidazole, decamethoxin, zinc sulphate, silver nitrate or amino acids glycine and tryptophan into nanocomposites was achieved. BAC were introduced into the polymer matrix either (1) directly, or (2) with a solution of colloidal silica, or (3) through immobilization on silica (sol-densil).

Interfacial phenomena at a surface of individual and complex fumed nanooxides.

Investigations of interfacial and temperature behaviors of nonpolar and polar adsorbates interacting with individual and complex fumed metal or metalloid oxides (FMO), initial and subjected to various treatments or chemical functionalization and compared to such porous adsorbents as silica gels, precipitated silica, mesoporous ordered silicas, filled polymeric composites, were analyzed. Complex nanooxides include core-shell nanoparticles, CSNP (50-200nm in size) with titania or alumina cores and silica or alumina shells in contrast to simple and smaller nanoparticles of individual FMO. CSNP could be destroyed under high-pressure cryogelation (HPCG) or mechanochemical activation (MCA).

Interfacial phenomena at a surface of partially silylated nanosilica.

Unmodified pyrogenic silica PS300 and partially silylated nanosilica samples at a degree of substitution of surface silanols by trimethylsilyl (TMS) groups Θ(TMS)=27.2% and 37.2% were studied to elucidate features of the interfacial behavior of water adsorbed alone, or co-adsorbed with methane, hydrogen, or trifluoroacetic acid (TFAA).

Well-defined oxide core-polymer shell nanoparticles: interfacial interactions, peculiar dynamics, and transitions in polymer nanolayers.

Interfacial interactions, chain dynamics, and glass and melting transitions were studied in well-defined core-shell nanoparticles with amorphous silica or crystalline alumina cores and noncrystallizable poly(vinyl pyrrolidone) (PVP) or crystallizable poly(ethylene glycol) (PEG) shells. Varying particle composition caused regular changes in the shell thickness from 1 to 2 nm (monomolecular layer) up to 90 nm. Far- and mid-IR spectroscopy allowed us to register hydrogen bonding and, tentatively, Lewis/Brønsted (LB) interfacial interactions as well as changes in the dynamics and conformational state of the polymer chains as a function of the nanoshell thickness.

Structural and adsorption characteristics and catalytic activity of titania and titania-containing nanomaterials.

Morphological, structural, adsorption, and catalytic properties of highly disperse titania prepared using sulfate and pyrogenic methods, and fumed titania-containing mixed oxides, were studied using XRD, TG/DTA, nitrogen adsorption, (1)H NMR, FTIR, microcalorimetry on immersion of oxides in water and decane, thermally stimulated depolarization current (TSDC) and catalytic photodecomposition of methylene blue (MB). Phase composition and aggregation characteristics of nanoparticles (pore size distribution) of sulfate and pyrogenically prepared titania are very different; temperature dependent structural properties are thus very different. Catalytic activity for the photodecomposition of MB is greatest (per gram of TiO(2) for the pure oxide materials) for non-treated ultrafine titania PC-500, which has the largest S(BET) value and smallest particle size of the materials studied.

Morphology and surface properties of fumed silicas.

Several series of fumed silicas and mixed fumed oxides produced and treated under different conditions were studied in gaseous and liquid media using nitrogen and water adsorption-desorption, mass spectrometry, FTIR, NMR, thermally stimulated depolarization current (TSDC), photon correlation spectroscopy (PCS), zeta potential, potentiometric titration, and Auger electron spectroscopy methods. Aggregation of primary particles and adsorption capacity (Vp) decrease and hysteresis loops of nitrogen adsorption-desorption isotherms becomes shorter with decreasing specific surface area (S(BET)). However, the shape of nitrogen adsorption-desorption isotherms can be assigned to the same type independent of S(BET) value.

Structured water in partially dehydrated yeast cells and at partially hydrophobized fumed silica surface.

Nonfreezable water structured due to interaction with endocellular objects in yeast cells (endocellular water) or with partially hydrophobic fumed silica (interfacial water) was studied by means of (1)H NMR spectroscopy with layer-by-layer freezing-out of bulk water and quantum chemical methods applied to water clusters in the gas and liquid (chloroform and cyclohexene) phases and adsorbed on silylated silica. Variation in cell hydration as well as in amount of water adsorbed on modified fumed silica leads to changes in the ratio between contributions of two water states characterized by NMR chemical shifts at delta(H)=1.1-1.

Interaction of poly(ethylene oxide) with fumed silica.

Interaction of poly(ethylene oxide) (PEO, 600 kDa) with fumed silica A-300 (SBET = 316 m2/g) was investigated under different conditions using adsorption, infrared (IR), thermal analysis (TG-DTA), AFM, and quantum chemical methods. The studied dried silica/PEO samples were also carbonized in a flow reactor at 773 K. The structural characteristics of fumed silica, PEO/silica, and pyrocarbon/fumed silica were investigated using nitrogen adsorption-desorption at 77.

Characterization of Fumed Alumina/Silica/Titania in the Gas Phase and in Aqueous Suspension.

Fumed oxide alumina/silica/titania was studied in comparison with fumed alumina, silica, titania, alumina/silica, and titania/silica by means of XRD, (1)H NMR, IR, optical, dielectric relaxation, and photon correlation spectroscopies, electrophoresis, and quantum chemical methods. The explored Al(2)O(3)/SiO(2)/TiO(2) consists of amorphous alumina ( approximately 22 wt%), amorphous silica ( approximately 28 wt%), and crystalline titania ( approximately 50 wt%, with a blend of anatase (88%) and rutile (12%)) and has a wide assortment of Brønsted and Lewis acid sites, which provide a greater acidity than that of individual fumed alumina, silica, or titania and an acidity close to that of fumed alumina/silica or titania/silica. The changes in the Gibbs free energy (DeltaG) of interfacial water in an aqueous suspension of Al(2)O(3)/SiO(2)/TiO(2) are close to the DeltaG values of the dispersions of pure rutile but markedly lower than those of alumina, anatase, or rutile covered by alumina and silica.

Structure of Chemical Vapor Deposition Titania/Silica Gel.

The structure of porous silica gel/titania synthesized using chemical vapor deposition (CVD) of titania via repeated reactions of TiCl(4) with the surface and subsequent hydrolysis of residual Ti-Cl bonds at different temperatures was investigated by means of low-temperature nitrogen adsorption-desorption, X-ray diffraction (XRD), IR spectroscopy, and theoretical methods. A globular model of porous solids with corpuscular structure was applied to estimate the porosity parameters of titania/silica gel adsorbents. The utilization of this model is useful, for example, to predict conditions for synthesis of titania/silica with a specified structure.