High-Performance n-Type Polymeric Mixed Ionic-Electronic Conductors: The Impacts of Halogen Functionalization.

Developing high-performance n-type polymer mixed ionic-electronic conductors (PMIECs) is a grand challenge, which largely determines their applications in vaious organic electronic devices, such as organic electrochemical transistors (OECTs) and organic thermoelectrics (OTEs). Herein, two halogen-functionalized PMIECs f-BTI2g-TVTF and f-BTI2g-TVTCl built from fused bithiophene imide dimer (f-BTI2) as the acceptor unit and halogenated thienylene-vinylene-thienylene (TVT) as the donor co-unit are reported. Compared to the control polymer f-BTI2g-TVT, the fluorinated f-BTI2g-TVTF shows lower-positioned lowest unoccupied molecular orbital (LUMO), improved charge transport property, and greater ion uptake capacity.

Cyano-Functionalized Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Thermoelectrics.

Doped n-type polymers usually exhibit low electrical conductivities and thermoelectric power factors (PFs), restricting the development of high-performance p-n-junction-based organic thermoelectrics (OTEs). Herein, the design and synthesis of a new cyano-functionalized fused bithiophene imide dimer (f-BTI2), CNI2, is reported, which synergistically combines the advantages of both cyano and imide functionalities, thus leading to substantially higher electron deficiency than the parent f-BTI2. On the basis of this novel building block, a series of n-type donor-acceptor and acceptor-acceptor polymers are successfully synthesized, all of which show good solubility, deep-lying frontier molecular orbital levels, and favorable polymer chain orientation.

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping.

Organic field-effect transistors (OFETs) based on 2D monolayer organic semiconductors (OSC) have demonstrated promising potentials for various applications, such as light emitting diode (LED) display drivers, logic circuits, and wearable electrocardiography (ECG) sensors. To date, the fabrications of this class of highly crystallized 2D organic semiconductors (OSC) are dominated by solution shearing. As these organic active layers are only a few molecular layers thick, their compatibilities with conventional thermal evaporated top electrodes or sophisticated photolithography patterning are very limited, which also restricts their device density.

Effectiveness of pelvic floor muscle training alone or combined with either a novel biofeedback device or conventional biofeedback for improving stress urinary incontinence: A randomized controlled pilot trial.

Purpose: To (i) compare the acceptance of a newly developed, novel biofeedback device (PelviSense) with that of conventional biofeedback (CB) using an intravaginal probe for the treatment of stress urinary incontinence (SUI) in women, (ii) examine the feasibility and safety of using the PelviSense device as a pelvic floor muscle (PFM) training (PFMT) adjunct, and (iii) compare the PFMT adherence and effectiveness of CB, the PelviSense device, with PFMT alone for women with SUI.

Methods: An assessor-blinded, three-arm, randomized controlled pilot trial was conducted among 51 women with SUI. Women were randomly allocated to one of three study groups (PelviSense-assisted PFMT, CB-assisted PFMT, or PFMT alone [control]).

Intrinsically Stretchable Organic Electrochemical Transistors with Rigid-Device-Benchmarkable Performance.

Intrinsically stretchable organic electrochemical transistors (OECTs) are being pursued as the next-generation tissue-like bioelectronic technologies to improve the interfacing with the soft human body. However, the performance of current intrinsically stretchable OECTs is far inferior to their rigid counterparts. In this work, for the first time, the authors report intrinsically stretchable OECTs with overall performance benchmarkable to conventional rigid devices.

Pushing OECTs toward Wearable: Development of a Miniaturized Analytical Control Unit for Wireless Device Characterization.

Organic electrochemical transistors (OECTs) have emerged as a next-generation biosensing technology because of their water-stability, cost-effectiveness, and ability to obtain high sensitivity at low operation voltage (mV). However, a miniaturized readout unit that can wirelessly characterize the overall performance of an OECT is still missing, which hinders the assembling of truly wearable OECT systems for continuous health-monitoring applications. In this work, we present a coin-sized analytical unit for remote and wireless OECT characterization, namely, a personalized electronic reader for electrochemical transistors (PERfECT).

Organic Field-Effect Transistor Fabricated on Internal Shrinking Substrate.

In the development of flexible organic field-effect transistors (OFET), downsizing and reduction of the operating voltage are essential for achieving a high current density with a low operating power. Although the bias voltage of the OFETs can be reduced by a high-k dielectric, achieving a threshold voltage close to zero remains a challenge. Moreover, the scaling down of OFETs demands the use of photolithography, and may lead to compatibility issues in organic semiconductors.

Mimicking associative learning using an ion-trapping non-volatile synaptic organic electrochemical transistor.

Associative learning, a critical learning principle to improve an individual's adaptability, has been emulated by few organic electrochemical devices. However, complicated bias schemes, high write voltages, as well as process irreversibility hinder the further development of associative learning circuits. Here, by adopting a poly(3,4-ethylenedioxythiophene):tosylate/Polytetrahydrofuran composite as the active channel, we present a non-volatile organic electrochemical transistor that shows a write bias less than 0.

Crystallized Monolayer Semiconductor for Ohmic Contact Resistance, High Intrinsic Gain, and High Current Density.

The contact resistance limits the downscaling and operating range of organic field-effect transistors (OFETs). Access resistance through multilayers of molecules and the nonideal metal/semiconductor interface are two major bottlenecks preventing the lowering of the contact resistance. In this work, monolayer (1L) organic crystals and nondestructive electrodes are utilized to overcome the abovementioned challenges.

Understanding molecular surface doping of large bandgap organic semiconductors and overcoming the contact/access resistance in organic field-effect transistors.

The contact resistance (Rc) and the effective carrier mobility (μeff) are considered as the important indicators of the performance of organic field-effect transistors (OFETs). Conventionally, the contact resistance is regarded as the interface effect between the metal electrodes and the organic semiconductors, while the carrier mobility is correlated to the crystallinity and π-π stacking of the organic molecules. In the staggered OFETs, Rc is actually closely correlated to μeff through the channel sheet resistance.

Field-Effect Transistors Based on 2D Organic Semiconductors Developed by a Hybrid Deposition Method.

Solution-processed 2D organic semiconductors (OSCs) have drawn considerable attention because of their novel applications from flexible optoelectronics to biosensors. However, obtaining well-oriented sheets of 2D organic materials with low defect density still poses a challenge. Here, a highly crystallized 2,9-didecyldinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (C-DNTT) monolayer crystal with large-area uniformity is obtained by an ultraslow shearing (USS) method and its growth pattern shows a kinetic Wulff's construction supported by theoretical calculations of surface energies.

Achieving Ultralow Turn-On Voltages in Organic Thin-Film Transistors: Investigating Fluoroalkylphosphonic Acid Self-Assembled Monolayer Hybrid Dielectrics.

The properties of organic thin-film transistors (TFTs) and thus their ability to address specific circuit design requirements depend greatly on the choice of the materials, particularly the organic semiconductor and the gate dielectric. For a particular organic semiconductor, the TFT performance must be reviewed for different combinations of substrates, fabrication conditions, and the choice of the gate dielectric in order to achieve the optimum TFT and circuit characteristics. We have fabricated and characterized organic TFTs based on the small-molecule organic semiconductor 2,7-diphenyl[1]benzothieno[3,2-][1]benzothiophene in combination with an ultrathin hybrid gate dielectric consisting of aluminum oxide and a self-assembled monolayer.

Solution-Phase Epitaxial Growth of Perovskite Films on 2D Material Flakes for High-Performance Solar Cells.

The quality of perovskite films is critical to the performance of perovskite solar cells. However, it is challenging to control the crystallinity and orientation of solution-processed perovskite films. Here, solution-phase van der Waals epitaxy growth of MAPbI perovskite films on MoS flakes is reported.

Small contact resistance and high-frequency operation of flexible low-voltage inverted coplanar organic transistors.

The contact resistance in organic thin-film transistors (TFTs) is the limiting factor in the development of high-frequency organic TFTs. In devices fabricated in the inverted (bottom-gate) device architecture, staggered (top-contact) organic TFTs have usually shown or are predicted to show lower contact resistance than coplanar (bottom-contact) organic TFTs. However, through comparison of organic TFTs with different gate-dielectric thicknesses based on the small-molecule organic semiconductor 2,9-diphenyl-dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene, we show the potential for bottom-contact TFTs to have lower contact resistance than top-contact TFTs, provided the gate dielectric is sufficiently thin and an interface layer such as pentafluorobenzenethiol is used to treat the surface of the source and drain contacts.

Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method.

Crystals of organic semiconductors are excellent candidates for flexible and array-based electronics. Large-scale synthesis of organic crystals in a controllable way while maintaining homogeneous single-crystal property has been a great challenge. The existence of grain boundaries and small crystal domains, however, restrict the device performance and limit the access to commercially viable organic electronics in the industry.

Smart Surgical Catheter for C-Reactive Protein Sensing Based on an Imperceptible Organic Transistor.

Organic field-effect transistors (OFETs)-based sensors have a great potential to be integrated with the next generation smart surgical tools for monitoring different real-time signals during surgery. However, allowing ultraflexible OFETs to have compatibility with standard medical sterilization procedures remains challenging. A novel capsule-like OFET structure is demonstrated by utilizing the fluoropolymer CYTOP to serve both encapsulation and peeling-off enhancement purposes.

Dual-Gated Transistor Platform for On-Site Detection of Lead Ions at Trace Levels.

On-site monitoring of heavy metals in drinking water has become crucial because of several high profile instances of contamination. Presently, reliable techniques for trace level heavy metal detection are mostly laboratory based, while the detection limits of contemporary field-based methods are barely meeting the exposure limits set by regulatory bodies such as the World Health Organization (WHO). Here, we show an on-site deployable, Pb sensor on a dual-gated transistor platform whose lower detection limit is 2 orders of magnitude better than the traditional sensor and 1 order of magnitude lower than the exposure limit set by WHO.

A High-Performance Optical Memory Array Based on Inhomogeneity of Organic Semiconductors.

Organic optical memory devices keep attracting intensive interests for diverse optoelectronic applications including optical sensors and memories. Here, flexible nonvolatile optical memory devices are developed based on the bis[1]benzothieno[2,3-d;2',3'-d']naphtho[2,3-b;6,7-b']dithiophene (BBTNDT) organic field-effect transistors with charge trapping centers induced by the inhomogeneity (nanosprouts) of the organic thin film. The devices exhibit average mobility as high as 7.

Investigation of interfacial thermal transport across graphene and an organic semiconductor using molecular dynamics simulations.

The interfacial thermal transport across graphene and an organic semiconductor, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT), is investigated using molecular dynamics simulations. The average thermal boundary resistance (TBR) of graphene and DNTT is 4.88 ± 0.

Phonon thermal transport in silicene-germanene superlattice: a molecular dynamics study.

Two-dimensional (2D) hybrid materials have drawn enormous attention in thermoelectric applications. In this work, we apply a molecular dynamics (MD) simulation to investigate the phonon thermal transport in silicene-germanene superlattice. A non-monotonic thermal conductivity of silicene-germanene superlattice with period length is revealed, which is due to the coherent-incoherent phonon conversion and phonon confinement mechanisms.

Highly Sensitive Glucose Sensor Based on Organic Electrochemical Transistor with Modified Gate Electrode.

An organic electrochemical transistor (OECT) with a glucose oxidase (GOx) and poly(n-vinyl-2-pyrrolidone)-capped platinum nanoparticles (Pt NPs) gate electrode was successfully integrated with a microfluidic channel to act as a highly sensitive chip-based glucose sensor. The sensing mechanism relies on the enzymatic reaction between glucose and GOx followed by electrochemical oxidation of hydrogen peroxide (HO) produced in the enzymatic reaction. This process largely increases the electrolyte potential that applies on PEDOT:PSS channel and causes more cations penetrate into PEDOT:PSS film to reduce it to semi-conducting state resulting in lower electric current between the source and the drain.

Molecular dynamics study of thermal transport in a dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) organic semiconductor.

The thermal transport in a high-mobility and air-stable small molecule organic semiconductor, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT), is simulated by using non-equilibrium molecular dynamics. We find that the thermal conductivity of DNTT has a strong dependence on crystal size and orientation directions (a*, b* and c*). The bulk thermal conductivities of DNTT along the a*, b* and c* directions are 0.

High Sensitivity, Wearable, Piezoresistive Pressure Sensors Based on Irregular Microhump Structures and Its Applications in Body Motion Sensing.

Unlabelled: A pressure sensor based on irregular microhump patterns has been proposed and developed. The devices show high sensitivity and broad operating pressure regime while comparing with regular micropattern devices. Finite element analysis (FEA) is utilized to confirm the sensing mechanism and predict the performance of the pressure sensor based on the microhump structures.

A Low-Operating-Power and Flexible Active-Matrix Organic-Transistor Temperature-Sensor Array.

An organic flexible temperature-sensor array exhibits great potential in health monitoring and other biomedical applications. The actively addressed 16 × 16 temperature sensor array reaches 100% yield rate and provides 2D temperature information of the objects placed in contact, even if the object has an irregular shape. The current device allows defect predictions of electronic devices, remote sensing of harsh environments, and e-skin applications.