Critical Overview on Pure Chitosan-based Scaffolds for Bone Tissue Engineering: Clinical insights in Dentistry.

Bone Tissue Engineering (BTE) is a field of regenerative medicine continuously improving, thanks to the development of new biomaterials used as grafts or scaffolds for repairing bone defects. In recent years, chitosan, a natural biopolymer extracted mainly from crustacean shells, has demonstrated unique and desirable characteristics for BTE applications, such as: biocompatibility, biodegradability, and osteoconductive behavior. Additionally, the presence of numerous active amine groups in its chemical structure allows it to be easily modified.

An experimental and theoretical investigation of the N(D) + CH (benzene) reaction with implications for the photochemical models of Titan.

We report on a combined experimental and theoretical investigation of the N(D) + CH (benzene) reaction, which is of relevance in the aromatic chemistry of the atmosphere of Titan. Experimentally, the reaction was studied (i) under single-collision conditions by the crossed molecular beams (CMB) scattering method with mass spectrometric detection and time-of-flight analysis at the collision energy () of 31.8 kJ mol to determine the primary products, their branching fractions (BFs), and the reaction micromechanism, and (ii) in a continuous supersonic flow reactor to determine the rate constant as a function of temperature from 50 K to 296 K.

In vitro comparative study on the mechanical behavior of Zirconia and Polyetheretherketone in applied dental sciences.

Objective: Recently, Zirconia and polyaryletherketone (PEEK) have attracted increasing interest as reliable and safe materials in dental applications, mainly because of their good biomechanical characteristics. The aim of this study was to investigate the response to different loads by prosthetic frameworks for supported fixed partial dentures (FPDs), thus simulating osseointegrated implants.

Materials And Methods: The specimens were divided into two groups (n= 5 each).

Multilayer Graphtriyne Membranes for Separation and Storage of CO: Molecular Dynamics Simulations of Post-Combustion Model Mixtures.

The ability to remove carbon dioxide from gaseous mixtures is a necessary step toward the reduction of greenhouse gas emissions. As a contribution to this field of research, we performed a molecular dynamics study assessing the separation and adsorption properties of multi-layered graphtriyne membranes on gaseous mixtures of CO, N, and HO. These mixtures closely resemble post-combustion gaseous products and are, therefore, suitable prototypes with which to model possible technological applications in the field of CO removal methodologies.

New Strategies and Instruments for Root Canal Shaping Procedure: An Overview.

Cone-beam computed tomography-based three-dimensional analysis of root canal trajectories and shapes have clearly shown that root canals are more complex in 3D, compared to traditional 2D visualization, and consequently, these findings affect properties of the nickel-titanium (NiTi) files requiring the following factors.

Gender medicine: the impact of probiotics on male patients.

Purpose: Numerous studies in the literature confirm the importance of the use of probiotics in inflammatory states of the prostate in humans. Our pilot study aimed to test probiotics strains ability to improve urinary bacterial load in male subjects.

Methods: Twenty healthy men aged 55-65 years, with recurrent urinatory infections were enrolled and randomized into 2 groups.

The Pregnancy Outcomes Among Newly Arrived Asylum-Seekers in Italy: Implications of Public Health.

Background: Migration has a significant impact on overall health and pregnancy outcome. Despite the fact that growing volume of migration flows significantly engaging the public health system of European host countries, there is a lack of evidence concerning pregnancy outcomes of newly arrived asylum-seeking women.

Methods: Data about pregnant asylum seekers hosted in the Italian Reception Centers between the 1 st June 2016 and the 1st June 2018 were retrospectively collected and analysed in the present study.

The alteration of stress-related physiological parameters after probiotics administration in oral surgeons with different degrees of surgical experience.

Purpose: Stress is a multifactorial and complex pathway, gaining growing attention from the healthcare community. Surgeons are subjected to higher levels of stress, due to surgical procedures that are demanding and repetitive; unfortunately, high-stress levels may also cause side-effects, as surgical mistakes. This study aimed to evaluate the efficacy of specific probiotics strains formula on stress levels in oral and maxillofacial surgeons, to improve their quality of life.

Vaccination campaign strategies in recently arrived migrants: experience of an Italian reception centre.

Introduction: Control of vaccine preventable diseases, while constituting a priority of European health policies, is challenged by migrations from countries with suboptimal levels of immunization coverage. We report here two different types of vaccination campaign strategy in one of the bigger Italian asylum seekers' centres. The vaccination service staff of the local national health institute came monthly during the first three years of observation, while in the last year, the vaccinations were offered directly upon arrival of migrants in the asylum seekers' centre.

Horizontal Ridge Augmentation and Contextual Implant Placement with a Resorbable Membrane and Particulated Anorganic Bovine Bone-Derived Mineral.

Alveolar ridge deficiency is considered a major limitation for successful implant placement. Various approaches have been developed to horizontal augmentation of bone volume. This case report presents the medium-term results of one-stage guided bone augmentation using an anorganic bovine bone (70%) and autologous bone (30%), placed in layers, in association with resorbable collagen membrane for a subsequent implant placement.

An Experimental and Theoretical Investigation of 1-Butanol Pyrolysis.

Bioalcohols are a promising family of biofuels. Among them, 1-butanol has a strong potential as a substitute for petrol. In this manuscript, we report on a theoretical and experimental characterization of 1-butanol thermal decomposition, a very important process in the 1-butanol combustion at high temperatures.

Additive manufacturing and biomimetic materials in oral and maxillofacial surgery: a topical overview.

Additive manufacturing (AM) is the term used for different and complex techniques to manufacture products with complex morphology, often referred to as "custom-made". The product is made without needing to melt the material into pre-formed molds, nor to remove it from an initial mass, as happens in subtractive processes. The additive methodology gives the AM enormous potential in the widest fields of application, from aerospace to biomedical, from dental to maxillofacial.

3D software scanning, processing and archiving palatal rugae: "identity base" technology.

The palatal rugae, which are anatomically described as folds or wrinkles of the palate, are located on the anterior third of the palate on each side of the palatal raphe and behind the incisive papilla. The use of palatal rugae for personal identification was suggested several years ago, and attracted interest from different researchers which created different classifications, still used in scientific literature. The "identity base" (IB) system has as its object a complex information system and a personal identification protocol by means of three-dimensional palatal scans in digital format.

Updates in regenerative medicine applied to dental sciences.

Mesenchymal stem cells (MSCs) are found in high concentrations in several tissues, such as umbilical cord, adipose tissue and dental tissue. Dental stem cells reside in many areas of the oral cavity. Thanks to their abilities, dental stem cells could be used to treat diseases and to understand the basic mechanisms of developmental pathologies.

Digital flow in medicine and dentistry: what’s new?

The increasing requirements of standardization in medical applications have led physicians towards a deep revision of their protocols. The phenomenon of ‘digital health’ has revolutionized the way a patient accesses medical information, but it has also improved the way the doctor handles the surgical and clinical phases. In digital dentistry, the working steps are mainly reported as digital image acquisition, preparation and/or processing of data, device production and clinical application on patients; the new technologies have brought significant benefits to both the dentist and the patient.

Decellularized Hydrogels in Bone Tissue Engineering: A Topical Review.

Nowadays, autograft and allograft techniques represent the main solution to improve bone repair. Unfortunately, autograft technique is expensive, invasive and subject to infections and hematoma, frequently affecting both donor sites and surgical sites. A recent advance in tissue engineering is the fabrication of cell-laden hydrogels with custom-made geometry, depending on the clinical case.

Potential Use of Human Periapical Cyst-Mesenchymal Stem Cells (hPCy-MSCs) as a Novel Stem Cell Source for Regenerative Medicine Applications.

Mesenchymal stem cells (MSCs) are attracting growing interest by the scientific community due to their huge regenerative potential. Thus, the plasticity of MSCs strongly suggests the utilization of these cells for regenerative medicine applications. The main issue about the clinical use of MSCs is related to the complex way to obtain them from healthy tissues; this topic has encouraged scientists to search for novel and more advantageous sources of these cells in easily accessible tissues.

Age estimation by the Cameriere's normalized measurements (CNM) of the single permanent mandibular tooth on a panoramic radiograph.

In this study Cameriere's normalized measurements (CNM) of a single mandibular tooth were evaluated for age estimation on a sample of ortopantomographies (OPTs) of 2223 Italian children aged between 4 and 15years. Dental maturity was radiographically evaluated by CNM of the seven left permanent mandibular teeth (CNMi=Ai/Li, i=1,…,7); in monoradicular teeth, the distance (Ai, i=1,…,5) between the inner sides of the open apex was measured while in biradicular teeth (Ai, i=6, 7), the sum of the distances between the inner sides of the two open apices was calculated. Ai was normalized by the tooth length (Li, i=1,…,7).

Metals used in maxillofacial surgery.

The goal of maxillofacial surgery is to restore the shape and functionality of maxillofacial region. In the past years, there has been a tremendous progress in this field because of significant advances in biotechnology that provided innovative biomaterials to efficiently reconstruct the maxillofacial injured region. By using appropriate selection of the implant biomaterial, it is possible to reconstruct the native tissue, both in form and function.

Retrospective Analysis of the Correlation Between the Facial Biotype and the Inclination of the Upper Canine Cusp Axis to the Occlusal Plane.

Permanent maxillary canines are the second most frequently impacted teeth and the prevalence of this clinical condition is estimated to be 1-2% in the general population. The diagnosis of maxillary canine impaction should be based on both clinical and radiographic examinations. The aim of this study was to evaluate the presence of a correlation between the facial biotype and the inclination of the upper cusp axis.