Comprehensive air quality assessment including non-targeted approaches in primary schools from Spain.

This work aims to establish a strategy to comprehensively assess the indoor air quality in schools including the analysis of chemical pollutants, bio-aerosols like fungi, bacteria and respiratory viruses and the identification of volatile and semi-volatile organic compounds applying non-targeted approaches. For this, a pilot study was performed in four primary schools from Spain, located in different urban and rural areas during different seasons. Common indoor pollutants, like CO NO, O, CO, particulate matter (PM, PM), ultrafine particles (UFP), total volatile organic compounds (TVOCs), and formaldehyde (HCHO), were assessed in terms of maximum recommended levels, daily variations, seasonality, and school location.

Determination of nitrofuran metabolites and nifurpirinol in animal tissues and eggs by ultra-high performance liquid chromatography-tandem mass spectrometry validated according to Regulation (EU) 2021/808.

In this work, an analytical method for the determination of eight non-allowed nitrofurans, including nifurpirinol and the metabolites of furazolidone, furaltadone, nitrofurantoin, nitrofurazone, nifursol, nitrovin, and nifuroxazide in animal tissues, including muscle (poultry, bovine, ovine, porcine, rabbit, and fish), kidney (bovine, ovine, porcine), and eggs, has been developed and validated according to Regulation (EU) 2021/808. The method was based on derivatization with 2-nitrobenzaldehyde in acid medium, followed by vortex-assisted liquid-liquid extraction and solid phase extraction for sample purification prior to ultra-high performance liquid chromatography-tandem mass spectrometry. Under selected conditions, the method was validated showing satisfactory relative matrix effects (CV ≤ 20 %), linearity (R ≥ 0.

Assessment of anthropogenic particles content in commercial beverages.

Microplastic (MPs) pollution is a current global concern that is affecting all environmental compartments and food sources. In this work, anthropogenic particles occurrence (MPs and natural and synthetic cellulosic particles), have been determined in 73 beverages packed in different containers. Overall, 1521 anthropogenic particles were found, being the lowest occurrence in water samples (7.

Analysis of microplastics in commercial vegetable edible oils from Italy and Spain.

In this work, assessment of microplastics (MPs) in commercial vegetable edible oils from Italy and Spain, including extra-virgin olive oil, olive oil, sunflower oil, and mixed seed oil, has been conducted for the first time. The method was based on sample dilution with ethanol:n-hexane (1:3, v/v), homogenization, vacuum filtration on macroporous silicon filters with 5 μm pore diameter to collect MPs, and automatic µ-FTIR spectroscopy for MPs detection and characterization. In the analysis of oil samples, a mean MPs abundance of 1140 ± 350 MPs/L was found.

Non-target screening and human risk assessment for adult and child populations of semi-volatile organic compounds in residential indoor dust in Spain.

In this work, an analytical strategy based on non-target screening of semi-volatile organic compounds and subsequent risk assessment for adult and child populations has been conducted for the first time in household indoor dust samples in Spain. The methodology was based on a microwave-assisted extraction followed by gas chromatography coupled to high resolution mass spectrometry determination, using a hybrid quadrupole-orbitrap analyzer. The procedure was applied to 19 residential indoor dust samples, collected in different Spanish regions (namely Galicia, La Rioja, Catalunya, the Balearic Islands, and the Valencian Region).

Untargeted analysis and tentative identification of unknown substances in human tears by ultra-high performance liquid chromatography-high resolution mass spectrometry: Pilot study.

In this work, a new approach for the identification of unknown compounds in human tears has been developed and validated using ultra-high performance liquid chromatography-high resolution mass spectrometry (UHPLC-HRMS) linked to an intelligent data acquisition mode (AcquireX DS-dd-MS) coupled to an automated data processing software (Compound Discoverer™ 3.2). As a pilot research study, four human tear samples from volunteers were analyzed.

Determination of 21 per- and poly-fluoroalkyl substances in paper- and cardboard-based food contact materials by ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry.

In this work, a new analytical method was developed and validated for the determination of the total content of 21 per- and poly-fluoroalkyl substances (PFASs) in paper- and cardboard-based food contact materials (FCMs). This method is based on green ultrasound-assisted lixiviation followed by ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS). The method was validated in various paper- and cardboard-based FCMs, showing good linearity ( ≥ 0.

A green analytical method for the simultaneous determination of 30 tropane and pyrrolizidine alkaloids and their N-oxides in teas and herbs for infusions by LC-Q-Orbitrap HRMS.

A green analytical method for the simultaneous determination of 30 tropane and pyrrolizidine alkaloids and their N-oxides in dried teas and herbs for infusions has been developed and validated. The proposed method is based on QuEChERS procedure followed by LC-Q-Orbitrap HRMS analysis. The method includes a first screening analysis to assess the presence of alkaloids, followed by the quantification of suspected positive samples (cut-off level, 0.

Determination of 60 Migrant Substances in Plastic Food Contact Materials by Vortex-Assisted Liquid-Liquid Extraction and GC-Q-Orbitrap HRMS.

A GC-HRMS analytical method for the determination of 60 migrant substances, including aldehydes, ketones, phthalates and other plasticizers, phenol derivatives, acrylates, and methacrylates, in plastic food contact materials (FCM) has been developed and validated. The proposed method includes migration tests, according to Commission Regulation (EU) 10/2011, using four food simulants (A, B, C, and D1), followed by vortex-assisted liquid-liquid extraction (VA-LLE) and GC-Q-Orbitrap HRMS analysis in selected ion monitoring (SIM) mode, with a resolving power of 30,000 FWHM and a mass accuracy ≤5 ppm. The method was validated, showing satisfactory linearity (R ≥ 0.

A Fast and Automated Strategy for the Identification and Risk Assessment of Unknown Substances (IAS/NIAS) in Plastic Food Contact Materials by GC-Q-Orbitrap HRMS: Recycled LDPE as a Proof-of-Concept.

A fast and automated approach has been developed for the tentative identification and risk assessment of unknown substances in plastic food contact materials (FCM) by GC-Q-Orbitrap HRMS. The proposed approach combines GC-HRMS full scan data acquisition coupled to Compound Discoverer™ 3.2 software for automated data processing and compound identification.

Liquid chromatography-Orbitrap Tribrid high-resolution mass spectrometry using data dependent-tandem mass spectrometry with triple stage fragmentation as a screening tool to perform identification and risk assessment of unknown substances in food contact epoxy resin.

A new, fast, and automatic approach has been applied for the tentative identification of unknown substances released by food contact epoxy resin after performing a migration test with food simulant. This approach combines intelligent data acquisition with AcquireX linked to liquid chromatography-Orbitrap Tribrid high-resolution mass spectrometry using data dependent-tandem mass spectrometry with triple stage fragmentation coupled to Compound Discoverer™ software for automated data processing and compound identification. The identification of the observed features was performed using a set of identification criteria, including exact mass, isotope pattern, tandem mass spectrometry spectra match, and retention time.

In vitro skin penetration of bronidox, bronopol and formaldehyde from cosmetics.

The objective was to evaluate the influence of the formulation in the in vitro transdermal absorption through pig ear skin of three preservatives, bronopol, bronidox and formaldehyde as well as the absorption of formaldehyde from bronopol and dimethyloldimethyl hydantoin (DMDM hydantoin). An aqueous solution, an O/W emulsion and a hydrogel were assayed. Bronidox and bronopol absorption depends on the formulation.

Stir bar sorptive-dispersive microextraction mediated by magnetic nanoparticles-metal organic framework composite: Determination of N-nitrosamines in cosmetic products.

A new analytical method based on the recently proposed stir bar sorptive-dispersive microextraction (SBSDME) technique has been developed to determine eight hazardous N-nitrosamines in cosmetic products. As previous step, a simple clean-up is carried out with hexane to remove those highly lipophilic compounds that disturb the SBSDME step. Subsequently, SBSDME is performed by using magnetic nanoparticles-metal organic framework composite, CoFeO/MIL-101(Fe), as sorbent to entrap the target analytes, which are later chemically desorbed and measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS).

Determination of N-nitrosamines in cosmetic products by vortex-assisted reversed-phase dispersive liquid-liquid microextraction and liquid chromatography with mass spectrometry.

A new analytical method for the simultaneous determination of trace levels of seven prohibited N-nitrosamines (N-nitrosodimethylamine, N-nitrosoethylmethylamine, N-nitrosopyrrolidine, N-nitrosodiethylamine, N-nitrosopiperidine, N-nitrosomorpholine, and N-nitrosodiethanolamine) in cosmetic products has been developed. The method is based on vortex-assisted reversed-phase dispersive liquid-liquid microextraction, which allows the extraction of highly polar compounds, followed by liquid chromatography with mass spectrometry. The variables involved in the extraction process were studied to obtain the highest enrichment factor.

Determination of free formaldehyde in cosmetics containing formaldehyde-releasing preservatives by reversed-phase dispersive liquid-liquid microextraction and liquid chromatography with post-column derivatization.

An analytical method for the determination of traces of formaldehyde in cosmetic products containing formaldehyde-releasing preservatives has been developed. The method is based on reversed-phase dispersive liquid-liquid microextraction (RP-DLLME), that allows the extraction of highly polar compounds, followed by liquid chromatography-ultraviolet/visible (LC-UV/vis) determination with post-column derivatization. The variables involved in the RP-DLLME process were studied to provide the best enrichment factors.

Determination of alternative preservatives in cosmetic products by chromophoric derivatization followed by vortex-assisted liquid-liquid semimicroextraction and liquid chromatography.

An analytical method for the simultaneous determination of phenethyl alcohol, methylpropanediol, phenylpropanol, caprylyl glycol, and ethylhexylglycerin, which are used as alternative preservatives in cosmetic products, has been developed. The method is based on liquid chromatography with UV spectrophotometric detection after chromophoric derivatization with benzoyl chloride and vortex-assisted liquid-liquid semimicroextraction. Different chromatographic parameters, derivatization conditions, and sample preparation variables were studied.

Vortex-assisted emulsification semimicroextraction for the analytical control of restricted ingredients in cosmetic products: determination of bronopol by liquid chromatography.

Vortex-assisted emulsification semimicroextraction is proposed as a one-step solution-extraction procedure for sample preparation in cosmetic products. The procedure allows rapid preparation based on dispersion of the sample in a mixture of 1 mL of n-hexane and 0.5 mL of ethanol, followed by the addition of 0.

Determination of hydroxytyrosol and tyrosol by liquid chromatography for the quality control of cosmetic products based on olive extracts.

An analytical method for the simultaneous determination of hydroxytyrosol and tyrosol in different types of olive extract raw materials and cosmetic cream samples has been developed. The determination was performed by liquid chromatography with UV spectrophotometric detection. Different chromatographic parameters, such as mobile phase pH and composition, oven temperature and different sample preparation variables were studied.