Exposure to nanoparticles derived from diesel particulate filter equipped engine increases vulnerability to arrhythmia in rat hearts.

Air pollution is well recognized as a central player in cardiovascular disease. Exhaust particulate from diesel engines (DEP) is rich in nanoparticles and may contribute to the health effects of particulate matter in the environment. Moreover, diesel soot emitted by modern engines denotes defective surfaces alongside chemically-reactive sites increasing soot cytotoxicity.

Toxic metal sequential sequestration in water using new amido-aminoacid ligand as a model for the interaction with polyamidoamines.

Polyamidoamines are low cost and easily synthesized materials that may find applications in cations sequestration and water treatment. In this paper a new amido-aminoacid ligand containing methionine has been designed as a monomeric model of the corresponding polyamidoamine. The amido-aminoacid ligand has been synthesized in high yield, by reacting acrylamide and methionine via aza-Michael addition in water and mild temperature conditions.

Ag-functionalized nanocrystalline cellulose for paper preservation and strengthening.

Waste paper is an environmentally friendly source of cellulosic material. Here we propose a new treatment based on nanocrystalline cellulose (CNC) for paper preservation and consolidation. Suspensions of CNC were prepared by sulfuric acid hydrolysis using waste paper as cellulose source (CNC) and compared with CNC from cotton linter (CNC).

3D printed chitosan scaffolds: A new TiO support for the photocatalytic degradation of amoxicillin in water.

TiO-supported chitosan scaffolds (TiO/CS) are here proposed as promising material for wastewater treatment, in particular for the removal of pharmaceutical compounds. TiO/CS are tested for the amoxicillin photodegradation under UV/Vis irradiation. Amoxicillin (AMX) is an antibiotic of the beta-lactam family.

Bio-inspired consolidants derived from crystalline nanocellulose for decayed wood.

Novel bio-inspired materials derived from crystalline nanocellulose (CNC) have been tested as wood consolidants. A suspension of CNC, produced by acid hydrolysis of cellulose and used as such or mixed with lignin and/or siloxane derivatives (PDMS), was applied on rotted wood samples of Norway spruce. X-Ray diffraction analysis on CNC powder showed high crystallinity index.

Multi-scale laboratory routine in the efficacy assessment of conservative products for natural stones.

The evaluation of conservative treatments' efficacy on natural building stones are usually based on standard recommendation routines finalized to evaluate compatibility and harmfulness of products in turn of the substrate. However, the visualization and the quantification of products inside pore structure of natural stones is not immediate through standard tests, so that imaging and advanced techniques are recently proposed in material conservation field to improve knowledge on penetration depth, modification of pore-air interface at different scale and monitor dynamic absorption processes. Moreover, natural stones are usually characterized by complex structure, which changes due to conservative treatments have to be inspected at different scale (from micrometer to nanometer).

A comprehensive study of the magnetic properties of the pyroxenes series CaMgSiO-CoSiO as a function of Co content.

We report a detailed study on the magnetic properties of the pyroxene series M2M1SiO, with M2  =  Ca and M1  =  Mg, where magnesium and then calcium are progressively substituted by cobalt. For cobalt site occupancy larger than 0.7 at the M1 site, a collinear antiferromagnetic phase is detected for T  <  T   =  12 K with a monodimensional character (i.

Raman spectroscopy as a PAT for pharmaceutical blending: Advantages and disadvantages.

Raman spectroscopy has been positively evaluated as a tool for the in-line and real-time monitoring of powder blending processes and it has been proved to be effective in the determination of the endpoint of the mixing, showing its potential role as process analytical technology (PAT). The aim of this study is to show advantages and disadvantages of Raman spectroscopy with respect to the most traditional HPLC analysis. The spectroscopic results, obtained directly on raw powders, sampled from a two-axis blender in real case conditions, were compared with the chromatographic data obtained on the same samples.

Raman and NMR kinetics study of the formation of amidoamines containing N-hydroxyethyl groups and investigations on their Cu(II) complexes in water.

Three amidoamines containing the N-hydroxyethyl group (Et), namely (Et)N(CH)C(O)NH (1), [(Et)N(CH)C(O)NH]CH (2) and EtN[(CH)C(O)NH] (3) have been synthesized by reacting diethanolamine EtNH with acrylamide and N,N'-methylenebisacrylamide (respectively 1 and 2) and ethanolamine EtNH with acrylamide (3). Four other compounds corresponding to 1 and 2, but derived from sec-amines MeNH (4 and 5) and EtNH (6 and 7) have been prepared for the sake of comparison of the spectroscopic features. All compounds have been obtained by the well-known aza-Michael addition between an N-nucleophile and an activated vinyl group.

Raman Investigation of Precious Jewelry Collections Preserved in Paolo Orsi Regional Museum (Siracusa, Sicily) Using Portable Equipment.

This work is a part of a large scientific project aimed at highlighting the potential of portable Raman equipment in characterizing jewelry materials preserved in museums, carried out in collaboration with gemologists and archeologists. In detail, we report the results of a measurement campaign performed for the study of gems and jewels preserved in the well-known Medagliere section at the Paolo Orsi Regional Museum of Siracusa (Sicily). The studied materials consist of exquisite examples of engraved loose gems and really rare examples of Hellenistic-Roman jewels, mainly coming from relevant Sicilian archaeological sites.

Oxidative and pro-inflammatory effects of cobalt and titanium oxide nanoparticles on aortic and venous endothelial cells.

Ultra-fine particles have recently been included among the risk factors for the development of endothelium inflammation and atherosclerosis, and cobalt (CoNPs) and titanium oxide nanoparticles (TiNPs) have attracted attention because of their wide range of applications. We investigated their toxicity profiles in two primary endothelial cell lines derived from human aorta (HAECs) and human umbilical vein (HUVECs) by comparing cell viability, oxidative stress, the expression of adhesion molecules and the release of chemokines during NP exposure. Both NPs were very rapidly internalised, and significantly increased adhesion molecule (ICAM-1, VCAM-1, E-selectin) mRNA and protein levels and the release of monocyte chemoattractant protein-1 (MCP-1) and interleukin 8 (IL-8).

Titanium dioxide nanoparticles promote arrhythmias via a direct interaction with rat cardiac tissue.

Background: In light of recent developments in nanotechnologies, interest is growing to better comprehend the interaction of nanoparticles with body tissues, in particular within the cardiovascular system. Attention has recently focused on the link between environmental pollution and cardiovascular diseases. Nanoparticles <50 nm in size are known to pass the alveolar-pulmonary barrier, enter into bloodstream and induce inflammation, but the direct pathogenic mechanisms still need to be evaluated.

Synthesis and characterization of nanocrystalline TiO2 with application as photoactive coating on stones.

Unlabelled: Self-cleaning photocatalytic coatings for biocalcarenite stones, based on TiO2 nanoparticles obtained by sol-gel processes at different pH values and also adding gold particles, have been investigated. The selected test material is a biocalcarenite named "pietra di Lecce" (Lecce stone), outcropping in Southern Italy. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and Raman investigations were carried out to characterize the TiO2 nanoparticles and coatings.

Micro-Raman study of copper hydroxychlorides and other corrosion products of bronze samples mimicking archaeological coins.

Three bronze samples created by CNR-ISMN (National Research Council-Institute of Nanostructured Materials) to be similar to Punic and Roman coins found in Tharros (OR, Sardinia, Italy) were studied to identify the corrosion products on their surfaces and to evaluate the reliability of the reproduction process. Micro-Raman spectroscopy was chosen to investigate the corroded surfaces because it is a non-destructive technique, it has high spatial resolution, and it gives the opportunity to discriminate between polymorphs and to correlate colour and chemical composition. A significant amount of green copper hydroxychlorides (Cu(2)(OH)(3)Cl) was detected on all the coins.

Applications of Raman spectroscopy to gemology.

Being nondestructive and requiring short measurement times, a low amount of material, and no sample preparation, Raman spectroscopy is used for routine investigation in the study of gemstone inclusions and treatments and for the characterization of mounted gems. In this work, a review of the use of laboratory Raman and micro-Raman spectrometers and of portable Raman systems in the gemology field is given, focusing on gem identification and on the evaluation of the composition, provenance, and genesis of gems. Many examples are shown of the use of Raman spectroscopy as a tool for the identification of imitations, synthetic gems, and enhancement treatments in natural gemstones.

The effect of water on particle size, porosity and the rate of drug release from implanted titania reservoirs.

The implantation of controlled drug release devices represents a new strategy in the treatment of neurodegenerative disorders. Sol-gel titania implants filled with valproic acid, have been used for this purpose to treat induced epilepsy in rats. The kinetics of the drug release depend on: (a) porosity, (b) chemical interactions between valproic acid and surface hydroxyl groups of titania, (c) particle size, and (d) particle size agglomerates.

Photoinduced birefringence in nanostructured SiO2:DR1 sol-gel films.

Pump-probe photoinduced birefringence measurements were carried out in amorphous and in nanostructured sol-gel films with Disperse Red 1 (DR1) azochromophores embedded in a SiO2 matrix. X-ray diffraction (XRD) patterns determine the long-range nanostructure order of the films, exhibiting a lamellar nanostructure, with two different d-spacings, due to the presence during the sol-gel process of the Sodium Dodecyl Sulfate (SDS) or of the Cetyltrimethylammonium Bromide (CTAB) ionic surfactants. The photoinduced birefringence measurements were performed on fresh and on heat treated films as a function of the pumping time.

Micro-Raman spectroscopy as a routine tool for garnet analysis.

A rapid system to obtain molar compositions of minerals belonging to the garnet group by means of Raman spectroscopy is illustrated here. A series of standard garnets, whose composition was determined by means of Wavelength Dispersive System (WDS) electron microprobe measurements, was used to correlate the wavenumbers of the different Raman peaks with chemical composition. A simple software routine was then developed in order to obtain garnet molar composition starting from the Raman spectrum, based on the assumption that in a solid solution belonging to the garnet family the Raman wavenumbers are linear combinations of end member wavenumbers, weighted by their molar fraction.

Raman and micro-thermometric investigation of the fluid inclusions in quartz in a gold-rich formation from Lepaguare mining district (Honduras, Central America).

Fluid inclusions in the quartz crystals present in gold-rich veins from central Honduras have been studied by means of micro-thermometry and micro-Raman spectroscopy in order to provide information on the physico-chemical conditions and chemical composition of the mineralizing fluids. The use of a confocal micro-Raman apparatus allowed to obtain information on the fluid composition, in particular on the gas phase, minimizing the contributions of the host matrix to the Raman signal. The samples studied were collected from an area (Lepaguare mining district, Northern-Central Honduras) rich in ore deposits due to the Cenozoic magmatic activity, where the gold and sulphide mineralization is connected with a system of quartz veins (few decimetres thick) occurring in low-grade metamorphic rocks and produced by hydrothermal fluids.

Green pigments of the Pompeian artists' palette.

Green colored samples on wall paintings and green powder from a pigment pot found in Pompeii area are investigated by micro-Raman, FT-IR and, for one sample, SEM-EDX. To obtain the green color, green earths and malachite were used, together with mixture of Egyptian blue and yellow ochre. The mineralogical identification of the green earths has been attempted through the comparison of the vibrational features, discriminating between celadonite and glauconite spectra.

Spectroscopic study of the degradation products in the holy water fonts in Santa Maria della Steccata Church in Parma (Italy).

Two holy water fonts (dated at the beginning of the XVII century) in the Santa Maria della Steccata Church in Parma (Italy) have recently been restored. Before the intervention, a detailed investigation on their degradation products was carried out to understand the mechanisms of alteration of the materials and to suggest appropriate restoration procedures. The analyses were performed by means of powder X-ray diffraction (XRD), micro-Fourier transform infrared (FTIR) and micro-Raman spectroscopies.

Polarization holographic gratings in hybrid solgel films doped with Disperse Red 1.

Polarization holographic gratings in sp configuration are written at 488 nm in photorefractive organic-inorganic films based on SiO2. The films, prepared by a solgel technique, contain Disperse Red 1, carbazole units, and 2,4,7-trinitro-9-fluorenone. The gratings are characterized by their diffraction efficiency for a 632.

Raman microspectrometric investigation of wall paintings in S. Giovanni Evangelista Abbey in Parma: a comparison between two artists of the 16th century.

Micro-Raman spectroscopy, combined with gas chromatography and ultra-violet fluorescence photography, was used to study some wall paintings in the S. Giovanni Evangelista Abbey in Parma, Italy. The restoration of some painted chapels enabled a comparison between two painters of the 16th century: Parmigianino (Girolamo Francesco Maria Mazzola, 1503-1540) and Michelangelo Anselmi (1492?-1556?).