Critical evaluations on the crystallographic properties of translucent dental zirconia ceramics stabilized with 3-6 mol% yttria.

Objectives: This study aimed to determine the crystalline phase composition of 3-6 mol% yttria-stabilized zirconia (3-6YSZ), specifically investigating the presence of tetragonal (t), cubic (c), and/or additional yttria-rich tetragonal (t') phase.

Methods: Laboratory-fabricated specimens comprising 3-5YSZ, resembling translucent dental zirconia ceramics (TZ specimens), and a blend of 3YSZ and 8YSZ, representing a c-phase reference, were prepared. Additionally, 25 dental zirconia products stabilized with 3-6 mol% yttria were analyzed.

Shear bond strength of the ceramic veneer to additively manufactured titanium.

Objectives: The objective of this in vitro study was to evaluate the shear bond strength between the ceramic veneer and additively manufactured titanium with different surface treatments, and to compare with milled titanium. Also, to characterize the surface and the presence of an α-case layer of additively manufactured and milled titanium.

Material And Methods: Sixty additively manufactured titanium grade 23, and 20 milled titanium grade 4 cylindrical specimens were divided into four groups based on surface treatments, air-particle abrasion and grinding.

Residual stress associated with crystalline phase transformation of 3-6 mol% yttria-stabilized zirconia ceramics induced by mechanical surface treatments.

Monolithic dental prostheses made of 3-6 mol% yttria-stabilized zirconia (3-6YSZ) have gained popularity owing to their improved material properties and semi-automated fabrication processes. In this study, we aimed to evaluate the influence of mechanical surface treatments, such as polishing, grinding, and sandblasting, on the residual stress of 3-6YSZ used for monolithic prostheses in association with crystalline phase transformation. Plate specimens were prepared from five dental zirconia blocks: Aadva Zirconia ST (3YSZ), Aadva Zirconia NT (6YSZ), Katana HT (4YSZ), Katana STML (5YSZ), and Katana UTML (6YSZ).

Evaluation of fit and accuracy of single crowns fabricated from self-glazed zirconia compared with milled zirconia.

Statement Of Problem: Self-glazed zirconia is a novel dental material fabricated with a combination of subtractive and additive manufacturing techniques. However, how the marginal and internal fit of these restorations compare with conventionally fabricated zirconia is unclear.

Purpose: The purpose of this in vitro study was to evaluate the marginal and internal fit and internal accuracy of single crowns made from self-glazed zirconia compared with those made from milled zirconia.

Comparison of porcelain veneer fracture in implant-supported fixed full-arch prostheses with a framework of either titanium, cobalt-chromium, or zirconia: An in vitro study.

Objectives: The aim of this study was to compare porcelain veneer strength on screw-retained implant-supported fixed full-arch prostheses with a framework of either milled titanium (Ti), cobalt-chromium (CoCr), and yttria-stabilized zirconia (Y-TZP) in an in vitro loading model.

Materials And Methods: Fifteen screw-retained maxillary implant-supported full-arch prostheses (FDP), five each of Ti, CoCr, and Y-TZP frameworks with porcelain veneers were included. All FDPs were subjected to thermocycling before loading until fracture of the veneer.