Improved limited view ultrasound tomography via machine learning.

Tomographic reconstruction is used extensively in medicine, non-destructive testing and geology. In an ideal situation where measurements are taken at all angles around an object, known as full view configuration, a full reconstruction of the object can be produced. One of the major issues faced in tomographic imaging is when measurements cannot be taken freely around the object under inspection.

Simulation of ultrasound backscatter coefficient measurement using the finite element method.

Ultrasound backscatter coefficient (BSC) measurement is a method for assessing tissue morphology that can inform on pathologies such as cancer. The BSC measurement is, however, limited by the accuracy with which the investigator can normalise their results to account for frequency dependent effects of diffraction and attenuation whilst performing such measurements. We propose a simulation-based approach to investigate the potential sources of error in assessing the BSC.

Attenuation of Rayleigh waves due to three-dimensional surface roughness: A comprehensive numerical evaluation.

The phenomenon of Rayleigh wave attenuation due to surface roughness has been well studied theoretically in the literature. Three scattering regimes describing it have been identified-the Rayleigh (long wavelength), stochastic (medium wavelength), and geometric (short wavelength)-with the attenuation coefficient exhibiting a different behavior in each. Here, in an extension to our previous work, we gain further insight with regard to the existing theory, in three dimensions, using finite element (FE) modeling, under a unified approach, where the same FE modeling techniques are used regardless of the scattering regime.

Fatigue state characterisation of steel pipes using ultrasonic shear waves.

The phenomenon of the reduction in the propagation speed of an ultrasonic wave when it travels through a fatigue zone has been well studied in the literature. Additionally, it has been established that shear waves are more severely affected by the presence of such a zone, compared with longitudinal waves. Our study utilises these phenomena to develop a method able to characterise the fatigue state of steel pipes.

Short Range Pipe Guided Wave Testing Using SH0 Plane Wave Imaging for Improved Quantification Accuracy.

Detection and criticality assessment of defects appearing in inaccessible locations in pipelines pose a great challenge for many industries. Inspection methods which allow for remote defect detection and accurate characterisation are needed. Guided wave testing (GWT) is capable of screening large lengths of pipes from a single device position, however it provides very limited individual feature characterisation.