Synthesis and application of AuNi@AC nano adsorbents for the removal of Maxilon Blue 5G azo dye from aquatic mediums.

In this research, gold-nicel supported on activated carbon (AC) nanoadsorbent (AuNi@AC) synthesized by following a series of physicochemical procedures was prepared for the removal of Maxilon Blue 5G (MB) which is a cationic textile dye. Experimental studies based on parameters specifically pH, contact time, nano catalytic adsorbent particle, initial MB dye concentration and temperature effect were conducted in aqueous solutions in a batch system. AuNi@AC nanoadsorbents (NAs) reached the equilibrium in 30 min under optimum conditions in adsorption of the dye.

Fabrication of activated carbon supported modified with bimetallic-platin ruthenium nano sorbent for removal of azo dye from aqueous media using enhanced ultrasonic wave.

Herein, activated carbon supported modified with bimetallic-platin ruthenium nano sorbent (PtRu@AC) was synthesized by a thermal decomposition process and used in the removal of methylene blue (MB) from aqueous solutions. The synthesized nano sorbents were characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS) spectroscopic techniques. The data obtained from characterization studies showed that PtRu@AC nano sorbent was highly crystalline and in a form of PtRu alloy with a monodispersed composition.

Magnetic nanocomposites decorated on multiwalled carbon nanotube for removal of Maxilon Blue 5G using the sono-Fenton method.

Herein, multiwalled carbon nanotube-based FeO nano-adsorbents (FeO@MWCNT) were synthesized by ultrasonic reduction method. The synthesized nano-adsorbent (FeO@MWCNT) exhibited efficient sonocatalytic activity to remove Maxilon Blue 5G, a textile dye, and present in a cationic form, in aqueous solution under ultrasonic irradiation. The magnetic nano-adsorbent particles were characterized by high-resolution transmission electron microscopy (HR-TEM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray diffraction (XRD).

Removal of copper ions from aqueous solutions by kaolinite and batch design.

The removal of copper ions from aqueous solutions by kaolinite was investigated by using a batch-type method. Effects of factors such as pH, ionic strength, temperature, acid-activation and calcination on copper adsorption were investigated. The uptake of copper was determined from changes in concentration as measured by atomic absorption spectrometry.

Removal of copper ions from aqueous solutions by hazelnut shell.

There is a great potential of woody hazelnut shell to use in some applications. Sorption studies are one of these. For this reason in this paper, batch adsorption of Cu(2+) ions onto hazelnut shells was studied.

Electrokinetic and adsorption properties of sepiolite modified by 3-aminopropyltriethoxysilane.

Surface modification of clay minerals has become increasingly important for improving the practical applications of clays such as fillers and adsorbents. An investigation was carried out on the surface modification of sepiolite with aminopropylsilyl groups in 3-aminopropyltriethoxysilane (3-APT). The zeta potential of the modified sepiolite suspensions was measured as a function of initial electrolyte concentration and equilibrium pH using a Zeta Meter 3.

Adsorption of cationic polyacrylamide onto sepiolite.

The adsorption of PAM onto sepiolite from aqueous solutions has been investigated systematically as a function of some parameters such as calcination temperature of sepiolite, pH, ionic strength and temperature. The adsorption of cationic polyacrylamide (PAM) increases with pH from 5.50 to 11.

Adsorption of polyvinylimidazole onto kaolinite.

The adsorption of polyvinylimidazole (PVI) onto kaolinite from aqueous solutions has been investigated systematically as a function of parameters such as calcination temperature of kaolinite, pH, ionic strength, and temperature. According to the experimental results, the adsorption of PVI increases with pH from 8.50 to 11.

Adsorption of CTAB onto perlite samples from aqueous solutions.

In this study, the adsorption properties of unexpanded and expanded perlite samples in aqueous cetyltrimethylammonium bromide (CTAB) solutions were investigated as a function of ionic strength, pH, and temperature. It was found that the amount of cetyltrimethylammonium bromide adsorbed onto unexpanded perlite was greater than that onto expanded perlite. For both perlite samples, the sorption capacity increased with increasing ionic strength and pH and decreasing temperature.

Electrokinetic properties of sepiolite suspensions in different electrolyte media.

The present paper deals with the electrokinetic characterization of sepiolite. A series of systematic zeta potential measurements have been carried out to determine the isoelectric point (iep) and potential-determining ions (pdi), and the effect of mono-, di-, and trivalent electrolytes such as NaCl, KCl, LiCl, NaNO(3), NaCH(3)COO, MgCl(2), CaCl(2), BaCl(2), CoCl(2), CuCl(2), Pb(NO(3))(2), Na(2)CO(3), Na(2)SO(4), AlCl(3), FeCl(3), and Na(3)PO(4) on the zeta potential of sepiolite. Zeta potential has been calculated with the aid of Smoluchowski's equation.

Sorption of acid red 57 from aqueous solution onto sepiolite.

Sepiolite, a highly porous mineral, is becoming widely used as an alternative material in areas where sorptive, catalytic and rheological applications are required. High ion exchange capacity and high surface area and more importantly its relatively cheap price make it an attractive adsorbent. In this study, the adsorption of acid red 57 by natural mesoporous sepiolite has been examined in order to measure the ability of this mineral to remove coloured textile dyes from wastewater.