Microplate-based 3D-printed image box for urea determination in milk by digital image colorimetry.

In this study, we describe a rapid and high-throughput smartphone-based digital colorimetric method for determining urea in milk. A compact and cost-effective 3D-printed image box microplate-based system was designed to measure multiple samples simultaneously, using minimal sample and reagent volumes. The apparatus was applied for the quantification of urea in milk based on its reaction with -dimethylaminobenzaldehyde (DMAB).

Synthesis of ultrasmall cerium oxide nanoparticles in deep eutectic solvent and their application in an electrochemical sensor to detect dopamine in biological fluid.

A solvothermal synthesis of ultrasmall cerium oxide nanoparticles (USCeOxNPs) with an average size of 0.73 ± 0.07 nm using deep eutectic solvent (DES) as a stabilizing medium at a temperature of 90 ºC is reported.

Optimised graphite/carbon black loading of recycled PLA for the production of low-cost conductive filament and its application to the detection of β-estradiol in environmental samples.

The production, optimisation, physicochemical, and electroanalytical characterisation of a low-cost electrically conductive additive manufacturing filament made with recycled poly(lactic acid) (rPLA), castor oil, carbon black, and graphite (CB-G/PLA) is reported. Through optimising the carbon black and graphite loading, the best ratio for conductivity, low material cost, and printability was found to be 60% carbon black to 40% graphite. The maximum composition within the rPLA with 10 wt% castor oil was found to be an overall nanocarbon loading of 35 wt% which produced a price of less than £0.

Simultaneous Determination of Uric Acid and Caffeine by Flow Injection Using Multiple-Pulse Amperometry.

The present study reports the development and application of a flow injection analysis (FIA) system for the simultaneous determination of uric acid (UA) and caffeine (CAF) using cathodically pretreated boron-doped diamond electrode (CPT-BDD) and multiple-pulse amperometry (MPA). The electrochemical profiles of UA and CAF were analyzed via cyclic voltammetry in the potential range of 0.20-1.

Photoelectrochemical Determination of Cardiac Troponin I as a Biomarker of Myocardial Infarction Using a BiS Film Electrodeposited on a BiVO-Coated Fluorine-Doped Tin Oxide Electrode.

A sensitive and selective label-free photoelectrochemical (PEC) immunosensor was designed for the detection of cardiac troponin I (cTnI). The platform was based on a fluorine-doped tin oxide (FTO)-coated glass photoelectrode modified with bismuth vanadate (BiVO) and sensitized by an electrodeposited bismuth sulfide (BiS) film. The PEC response of the BiS/BiVO/FTO platform for the ascorbic acid (AA) donor molecule was approximately 1.

Using nanostructured carbon black-based electrochemical (bio)sensors for pharmaceutical and biomedical analyses: A comprehensive review.

The outstanding electronic properties of carbon black (CB) and its economic advantages have fueled its application as nanostructured electrode material for the development of new electrochemical sensors and biosensors. CB-based electrochemical sensing devices have been found to exhibit high surface area, fast charge transfer kinetics, and excellent functionalization. In the present work, we set forth a comprehensive review of the recent advances made in the development and application of CB-based electrochemical devices for pharmaceutical and biomedical analyses - from quantitative monitoring of drug formulations to clinical diagnoses - and the underlying challenges and constraints that need to be overcome.

Determination of ofloxacin in the presence of dopamine, paracetamol, and caffeine using a glassy carbon electrode based on carbon nanomaterials and gold nanoparticles.

A new electrode was prepared based on functionalized graphene and gold nanoparticles dispersed in a chitosan film. Such an electrochemical sensor determines ofloxacin in the presence of dopamine, paracetamol, and caffeine. Characterization (morphological and electrochemical) was done using scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry.

Enhancing the electrochemical sensitivity of hydroquinone using a hydrophobic deep eutectic solvent-based carbon paste electrode.

The present study reports the synthesis and characterization of hydrophobic deep eutectic solvents (HDES) based on fatty acids and tetrabutylammonium bromide (TBAB) or 1-octanol using Fourier transform infrared spectroscopy, and the analysis of the physicochemical properties (viscosity, density, electrical conductivity, and water content) of these solvents. A carbon paste electrode modified with 6.0% (m/m) decanoic acid and TBAB-based HDES was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy.

Use of carbon black based electrode as sensor for solid-state electrochemical studies and voltammetric determination of solid residues of lead.

For the first time carbon black based electrode modified with paraffin was applied as a sensor on voltammetry of immobilized microparticles (VIMP) approach for determination of lead solid residues in hair dye samples. The solid microparticles of Pb(II) (Pb(CHCOO)) immobilized into the carbon paste sensor containing carbon black and paraffin were firstly reduced at initial potentials and further reoxidized at around -0.60 V during anodic scan.

Voltammetric determination of ethinylestradiol using screen-printed electrode modified with functionalized graphene, graphene quantum dots and magnetic nanoparticles coated with molecularly imprinted polymers.

The present work reports the development of a sensitive and selective method for ethinylestradiol detection using screen-printed electrode (SPE) modified with functionalized graphene (FG), graphene quantum dots (GQDs) and magnetic nanoparticles coated with molecularly imprinted polymers (mag@MIP). The performance of the mag@MIP sensor was compared with that of a non-molecularly imprinted sensor (mag@NIP). Chemical and physical characterizations of the mag@NIP and mag@MIP sensors were performed using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and Brunauer-Emmett-Teller (BET) techniques.

Polyphenol oxidase-based electrochemical biosensors: A review.

The detection of phenolic compounds is relevant not only for their possible benefits to human health but also for their role as chemical pollutants, including as endocrine disruptors. The required monitoring of such compounds on-site or in field analysis can be performed with electrochemical biosensors made with polyphenol oxidases (PPO). In this review, we describe biosensors containing the oxidases tyrosinase and laccase, in addition to crude extracts and tissues from plants as enzyme sources.

Simultaneous determination of direct yellow 50, tryptophan, carbendazim, and caffeine in environmental and biological fluid samples using graphite pencil electrode modified with palladium nanoparticles.

The present study reports the development of graphite pencil electrode modified with palladium nanoparticles (PdNPs) and its application as an electrochemical sensor for the simultaneous detection of direct yellow 50, tryptophan, carbendazim and caffeine in river water and synthetic urine samples. The combination involving the conductive surface of the graphite pencil electrode (GPE) and the enlargement of the surface area caused by the use of palladium nanoparticles (PdNPs) led to the improvement of the analytical performance of the proposed device. The surface of the GPE-PdNPs was characterized by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).

Using BiVO/CuO-Based Photoelectrocatalyzer for 4-Nitrophenol Degradation.

The present work reports the degradation of 4-nitrophenol using BiVO/CuO hybrid material synthesized by the precipitation of BiVO in the presence of CuO. Morphological and structural characterizations were performed using X-ray diffraction and scanning electronic microscopy coupled to energy dispersive X-ray spectroscopy. Through the calculation of the Kubelka-Munk function applied to diffuse reflectance spectrophotometry data, the hybrid material presented absorption edge of 1.

Electrochemical sensor based on ionic liquid and carbon black for voltammetric determination of Allura red colorant at nanomolar levels in soft drink powders.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate and carbon black (CB) nanoparticles were incorporated within a crosslinked chitosan film over the surface of a glassy carbon electrode, and the obtained architecture explored to the sensitive voltammetric sensing of Allura red colorant in soft drinking powders. The different electrodic surfaces were morphologically and electrochemically characterized. From the modification of glassy carbon electrode with IL and CB, a significantly enhanced voltammetric response was achieved toward the Allura red irreversible oxidation reaction.

A new electrochemical platform based on low cost nanomaterials for sensitive detection of the amoxicillin antibiotic in different matrices.

A new electrochemical device based on a combination of nanomaterials such as Printex 6L Carbon and cadmium telluride quantum dots within a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate film was developed for sensitive determination of amoxicillin. The morphological, structural and electrochemical characteristics of the nanostructured material were evaluated using X-ray diffraction, confocal microscopy, transmission electron microscopy and voltammetric techniques. The synergy between these materials increased the electrochemical activity, the electron transfer rate and the electrode surface area, leading to a high magnitude of the anodic peak current for the determination of amoxicillin.

Electrochemical paper-based microfluidic device for high throughput multiplexed analysis.

A disposable microfluidic electrochemical paper-based device for multiplexed analysis based on sixteen independent microfluidic channels with electrochemical detection is proposed. A major advantage of this work was the non-necessary use of a wax printer for devices manufacturing which has a high cost of operation. In addition, a commercial multiplexing module was used that has the multiplexing capability of 8-16 channels and, for the first time using this module, the strategy of multiplexing both the working and reference electrodes were used.

Simultaneous determination of environmental contaminants using a graphite oxide - Polyurethane composite electrode modified with cyclodextrin.

A composite electrode based on graphite oxide (GrO)-polyurethane (PU) modified with β-cyclodextrin (CD) was proposed for the simultaneous determination of three drugs: terbutaline (TER), nimesulide (NIM), and methocarbamol (MET), as possible contaminants in river water samples. To evaluate the performance of the proposed CD-GrOPUE, voltammetric techniques were used and two other electrodes were fabricated (GrOPUE and GrPUE) for comparison. The functionalization of the GrO was confirmed by scanning electron microscopy images, energy-dispersive X-ray spectroscopy analysis, and thermogravimetry.

Simultaneous voltammetric sensing of levodopa, piroxicam, ofloxacin and methocarbamol using a carbon paste electrode modified with graphite oxide and β-cyclodextrin.

A carbon paste electrode (CPE) was modified with graphite oxide (GrO) and β-cyclodextrin (CD) to obtain a sensor for simultaneous voltammetric determination of levodopa (LD), piroxicam (PRX), ofloxacin (OFX) and methocarbamol (MCB). The morphology, structure and electrochemical properties of the functionalized GrO were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, contact angle measurements and cyclic voltammetry. Under the optimal experimental conditions, the sensor is capable of detecting LD, PRX, OFX and MCB by square wave voltammetry (SWV) at working potentials of +0.

Square-wave adsorptive anodic stripping voltammetric determination of norfloxacin using a glassy carbon electrode modified with carbon black and CdTe quantum dots in a chitosan film.

A glassy carbon electrode was modified with carbon black and CdTe quantum dots in a chitosan film to obtained a sensor for norfloxacin (NOR) in the presence of dopamine, caffeine, and uric acid. The morphological, structural and electrochemical characteristics of the nanostructured material were evaluated using spectrophotometry, X-ray diffraction, transmission electronic microscopy and voltammetry. The high electrochemical activity, fast electron transfer rate and high surface area enhanced the oxidation peak currents and shifted the peak potentials of NOR for more negative values (typically at 0.

A new disposable microfluidic electrochemical paper-based device for the simultaneous determination of clinical biomarkers.

A new disposable microfluidic electrochemical paper-based device (ePAD) consisting of two spot sensors in the same working electrode for the simultaneous determination of uric acid and creatinine was developed. The spot 1 surface was modified with graphene quantum dots for direct uric acid oxidation and spot 2 surface modified with graphene quantum dots, creatininase and a ruthenium electrochemical mediator for creatinine oxidation. The ePAD was employed to construct an electrochemical sensor (based on square wave voltammetry analysis) for the simultaneous determination of uric acid and creatinine in the 0.

Electrochemical biosensor made with tyrosinase immobilized in a matrix of nanodiamonds and potato starch for detecting phenolic compounds.

The envisaged ubiquitous sensing and biosensing for varied applications has motivated materials development toward low cost, biocompatible platforms. In this paper, we demonstrate that carbon nanodiamonds (NDs) can be combined with potato starch (PS) and be deposited on a glassy carbon electrode (GCE) in the form of a homogeneous, rough film, with electroanalytical performance tuned by varying the relative ND-PS concentration. As a proof of concept, the ND/PS film served as matrix to immobilize tyrosinase (Tyr) and the resulting Tyr-ND-PS/GCE biosensor was suitable to detect catechol using differential pulse voltammetry with detection limit of 3.

Assessment of the performance of triphenylphosphine for the voltammetric determination of elemental sulphur in cosmetic products.

In this paper, an alternative voltammetric method for the determination of elemental sulphur in cosmetic products is presented. It is based on the decrease of triphenylphosphine oxidation current in the presence of elemental sulphur by using a glassy carbon electrode. A solution of 2% (m/v) acetic acid and 0.