Impact Testing in Implant-Supported Prostheses and Natural Teeth: A Systematic Review of Properties and Performance.

Dental implants offer an effective solution for partial and total edentulism, but mechanical and biological complications exist. Furthermore, high occlusal loads challenge implants and lead to potential failures. This review focuses on impact testing in contrast to incremental and static tests, an underexplored aspect of assessing daily loads on implants, bringing to light potential complications.

In Vitro Comparison of Internal and Marginal Adaptation between Printed and Milled Onlays.

Statement Of Problem: Nowadays, milling is still the gold standard for fabricating indirect restorations, but to overcome its disadvantages, there are alternatives, such as 3D printing.

Purpose: This study aimed to compare the gaps between the prepared tooth and milled and printed onlays fabricated with the same CAD design. It also aimed to determine the gap reproducibility across onlays fabricated by 3D printing and milling.

Reverse impression technique: A fully digital protocol for the fabrication of the definitive fixed prosthesis for completely edentulous patients.

In complete arch implant rehabilitation, one of the greatest difficulties still encountered in the digital workflow is the deviation of the implant position during intraoral scanner (IOS) data acquisition. As a result, the passivity of a definitive prosthesis fabricated using IOS data might be compromised. Thus, an implant position verification method is essential, either digitally or conventionally executed.

A Systematic Study of Restorative Crown-Materials Combinations for Dental Implants: Characterization of Mechanical Properties under Dynamic Loads.

This study aimed to find the optimum mechanical characteristics of the restorative materials for the manufacture of implant crowns subjected to impact loading when different combinations of materials are used for the inner and outer crown. Several combinations of external-internal crown restorative materials were analyzed. The dynamic stresses at eight different zones of a dental implant subjected to an impact load and the influence of several mechanical properties, such as the Young's modulus, Poisson's ratio, density, and initial velocity, were analyzed and compared.

Covariates Relating to Implant Failure and Marginal Bone Loss of a Novel Triangular Neck-Implant Placed by Post-Graduate Students: A 1-Year Prospective Cohort Study.

(1) Background: Most of the clinical literature dealing with dental implants has been issued by experienced teams working either in university settings or in private practice. The purpose of this study was to identify contributing covariates to implant failure and marginal bone loss (MBL) at the 1-year follow-up of a novel triangular-neck implant design when placed by inexperienced post-graduate students. (2) Methods: A prospective cohort study was conducted on study participants eligible for implant placement at the UIC (International University of Catalonia), Barcelona, Spain.

Bone Stress Evaluation with and without Cortical Bone Using Several Dental Restorative Materials Subjected to Impact Load: A Fully 3D Transient Finite-Element Study.

. Previous peri-implantitis, peri-implant bone regeneration, or immediate implant placement postextraction may be responsible for the absence of cortical bone. Single crown materials are then relevant when dynamic forces are transferred into bone tissue and, therefore, the presence (or absence) of cortical bone can affect the long-term survival of the implant.

A 3D Finite Element Analysis Model of Single Implant-Supported Prosthesis under Dynamic Impact Loading for Evaluation of Stress in the Crown, Abutment and Cortical Bone Using Different Rehabilitation Materials.

In the literature, many researchers investigated static loading effects on an implant. However, dynamic loading under impact loading has not been investigated formally using numerical methods. This study aims to evaluate, with 3D finite element analysis (3D FEA), the stress transferred (maximum peak and variation in time) from a dynamic impact force applied to a single implant-supported prosthesis made from different materials.

Fracture Resistance of Two Different Composite Resin CAD/CAM Crowns Bonded to Titanium Abutments.

Purpose: To determine the influence of thermal and mechanical cycling on fracture load and fracture pattern of resin nanoceramic crowns and polymer-infiltrated ceramic-network (PICN) crowns, both fabricated with CAD/CAM technology.

Materials And Methods: A total of 90 premolar crowns bonded to titanium abutments were divided into three groups of 30 crowns each: 30 resin nanoceramic crowns (LU); 30 PICN crowns (VE); and 30 metal-ceramic crowns (MC). The 30 specimens of each group were further divided into three subgroups of 10 each that underwent (1) no treatment, (2) thermocycling (2,000 cycles, 5°C to 55°C), and (3) thermocycling with subsequent mechanical cycling (120,000 cycles, 80 N, 2 Hz).

Protocol for the clinical assessment of passive fit for multiple implant-supported prostheses: A dental technique.

With monolithic materials and the new technologies for framework production, assessment of passive fit before fabrication of the definitive prosthesis or its framework is essential to avoid prosthesis remakes. This article describes an updated clinical protocol to assess passive fit during the prosthesis fabrication process through the systematic use of tactile feel while tightening the retaining screws, the visual or radiographic evaluation when performing the 1-screw or Sheffield fit test, and the torque/time graph obtained during the placement of the implant- or abutment-retaining screws with a torque-controlled surgical motor.

Factors Affecting Implant Failure and Marginal Bone Loss of Implants Placed by Post-Graduate Students: A 1-Year Prospective Cohort Study.

Statement Of The Problem: Most of the clinical documentation of implant success and survival published in the literature have been issued by either experienced teams from university settings involving strict patient selection criteria or from seasoned private practitioners. By contrast, studies focusing on implants placed and rehabilitated by inexperienced post-graduate students are scarce.

Purpose: To record failure rates and identify the contributing factors to implant failure and marginal bone loss (MBL) of implants placed and rehabilitated by inexperienced post-graduate students at the one-year follow-up.

Comparison between experimental digital image processing and numerical methods for stress analysis in dental implants with different restorative materials.

The aim of this study is to evaluate the stresses transferred to peri-implant areas from single implants restored with different restorative materials and subjected to a static vertical load with low eccentricity. A total of 12 crowns were made with four types of materials: carbon fiber-composite, metal-ceramic, metal-composite, and full-metal, all of them cemented over a titanium abutment. Three different ways of approaching the problem have been used independently to verify the robustness of the conclusions.

Snoring intensity assessment with three different smartphones using the SnoreLab application in one participant.

Study Objectives: To compare the assessment of snoring using the SnoreLab application (app) using three different smartphones by one participant to validate SnoreLab as a method for collecting data for studies on the effectiveness of snoring treatment.

Methods: A person from the research group was monitored for 30 consecutive nights with the SnoreLab app using three different smartphones (Xiaomi MI8Pro, Samsung Galaxy Alpha, and BQ Aquaris V). The SnoreLab app instructions were strictly followed, and data were collected from the app.