Macroscopic Biaxial Order in Multilayer Films of Bent-Core Liquid Crystals Deposited by Combined Langmuir-Blodgett/Langmuir-Schaefer Technique.

Bent-core liquid crystals, a class of mesogenic compounds with non-linear molecular structures, are well known for their unconventional mesophases, characterized by complex molecular (and supramolecular) ordering and often featuring biaxial and polar properties. In the nematic phase, their unique behavior is manifested in the formation of nano-sized biaxial clusters of layered molecules (cybotactic groups). While this prompted their consideration in the quest for nematic biaxiality, experimental evidence indicates that the cybotactic order is only short-ranged and that the nematic phase is macroscopically uniaxial.

Development of a Quartz-Based Photo-Mobile Polymer Film for Controlled Motion Triggered by Light or Heat.

We have developed a photo-mobile polymer film, that combines organic and inorganic materials, to allow for controlled motion that can be triggered by light or heat. Our film is made using recycled quartz and consists of two layers: a multi-acrylate polymer layer and a layer containing oxidized 4-amino-phenol and N-Vinyl-1-Pyrrolidinone. The use of quartz in our film also gives it a high temperature resistance of at least 350 °C.

Light-Controlled Rotational Speed of an Acoustically Levitating Photomobile Polymer Film.

In this work, we study the light-induced changes of the rotational speed of a thin photomobile film using a single-axis acoustic levitator operating at 40 kHz. In our experiments, a 50 μm thick photomobile polymer film (PMP) is placed in one of the nodes of a stationary acoustic field. Under the action of the field, the film remains suspended in air.

On the Use of Haloalkane/Acrylate-Based Holographic Gratings as Compression and Rotation Sensors.

In this work, we test the effectiveness of using highly transparent holographic phase reflection and transmission volume gratings based on multifunctional acrylates as linear compression and rotation sensors. The gratings are recorded in a holographic mixture based on multi-reticulated acrylate and haloalkanes. To activate the photo-polymerization process, we used a mixture of 6-oxocamphore and rhodamine 6G.

Top-Performance Transmission Gratings with Haloalkanes-Based Polymeric Composite Materials.

We report on highly transparent holographic phase transmission volume gratings recorded in the visible region at λ = 532 nm. The maximum measured diffraction efficiency is higher than 80% with a grating pitch of Λ≈ 300 nm and a refractive index modulation Δn ≈ 0.018.

Light-Controlled Direction of Distributed Feedback Laser Emission by Photo-Mobile Polymer Films.

We report on the realization of Distributed Feedback (DFB) lasing by a high-resolution reflection grating integrated in a Photomobile Polymer (PMP) film. The grating is recorded in a recently developed holographic mixture basically containing halolakanes/acrylates and a fluorescent dye molecule (Rhodamine 6G). The PMP-mixture is placed around the grating spot and a subsequent curing/photo-polymerization process is promoted by UV-irradiation.

Nanoscale Structure of Langmuir-Blodgett Film of Bent-Core Molecules.

Bent-core mesogens (BCMs) are a class of thermotropic liquid crystals featuring several unconventional properties. However, the interpretation and technological exploitation of their unique behavior have been hampered by the difficulty of controlling their anchoring at surfaces. To tackle this issue, we report the nanoscale structural characterization of BCM films prepared using the Langmuir-Blodgett technique.

Cubic and Hexagonal Mesophases for Protein Encapsulation: Structural Effects of Insulin Confinement.

Monoolein-based cubic and hexagonal mesophases were investigated as matrices for insulin loading, at low pH, as a function of temperature and in the presence of increasing amounts of oleic acid, as a structural stabilizer for the hexagonal phase. Synchrotron small angle X-ray diffraction, rheological measurements, and attenuated total reflection-Fourier transform infrared spectroscopy were used to study the effects of insulin loading on the lipid mesophases and of the effect of protein confinement in the 2D- and 3D-lipid matrix water channels on its stability and unfolding behavior. We found that insulin encapsulation has only little effects both on the mesophase structures and on the viscoelastic properties of lipid systems, whereas protein confinement affects the response of the secondary structure of insulin to thermal changes in a different manner according to the specific mesophase: in the cubic structure, the unfolding toward an unordered structure is favored, while the prevalence of parallel β-sheets, and nuclei for fibril formation, is observed in hexagonal structures.

Synchrotron Characterization of Hexagonal and Cubic Lipidic Phases Loaded with Azolate/Phosphane Gold(I) Compounds: A New Approach to the Uploading of Gold(I)-Based Drugs.

Gold(I) phosphane compounds have recently attracted a renewed interest as potential new protagonists in cancer therapy. A class of phosphane gold(I) complexes containing azolate ligands has been successfully tested against several cancer cell lines and, in particular, against basal-like breast (BLB) cancer, a form characterized by strongly severe diagnosis and short life lapse after classic chemotherapy. Even though the anticancer activity of gold(I) phosphane compounds is thoroughly ascertained, no study has been devoted to the possibility of their delivery in nanovectors.

Nanostructure of Unconventional Liquid Crystals Investigated by Synchrotron Radiation.

The macroscopic properties of novel liquid crystal (LC) systems-LCs with unconventional molecular structure as well as conventional LCs in unconventional geometries-directly descend from their mesoscopic structural organization. While X-ray diffraction (XRD) is an obvious choice to investigate their nanoscale structure, conventional diffractometry is often hampered by experimental difficulties: the low scattering power and short-range positional order of the materials, resulting in weak and diffuse diffraction features; the need to perform measurements in challenging conditions, e.g.

Strong graphene oxide nanocomposites from aqueous hybrid liquid crystals.

Combining polymers with small amounts of stiff carbon-based nanofillers such as graphene or graphene oxide is expected to yield low-density nanocomposites with exceptional mechanical properties. However, such nanocomposites have remained elusive because of incompatibilities between fillers and polymers that are further compounded by processing difficulties. Here we report a water-based process to obtain highly reinforced nanocomposite films by simple mixing of two liquid crystalline solutions: a colloidal nematic phase comprised of graphene oxide platelets and a nematic phase formed by a rod-like high-performance aramid.

Lyotropic Liquid-Crystalline Nanosystems as Drug Delivery Agents for 5-Fluorouracil: Structure and Cytotoxicity.

Lyotropic cubic liquid-crystalline systems have received increasing attention due to their unique microstructural and physicochemical properties as efficient nanocarriers for drug delivery. We report the preparation and characterization of bulk phases and cubosome dispersions of phytantriol loaded with the anticancer drug 5-fluorouracil, in neutral and anionic forms. In both cases, a Pn3m cubic phase was observed.

Search for microscopic and macroscopic biaxiality in the cybotactic nematic phase of new oxadiazole bent-core mesogens.

The possibility of biaxial orientational order in nematic liquid crystals is a subject of intense current interest. We explore the tendencies toward local and global biaxial ordering in the recently synthesized trimethylated oxadiazole-based bent-core mesogens with a pronounced asymmetric (bow-type) shape of molecules. The combination of x-ray diffraction and optical studies suggests that the biaxial order is expressed differently at the short- and long-range scales.

Micrometer-Scale Ordering of Silicon-Containing Block Copolymer Thin Films via High-Temperature Thermal Treatments.

Block copolymer (BCP) self-assembly is expected to complement conventional optical lithography for the fabrication of next-generation microelectronic devices. In this regard, silicon-containing BCPs with a high Flory-Huggins interaction parameter (χ) are extremely appealing because they form high-resolution nanostructures with characteristic dimensions below 10 nm. However, due to their slow self-assembly kinetics and low thermal stability, these silicon-containing high-χ BCPs are usually processed by solvent vapor annealing or in solvent-rich ambient at a low annealing temperature, significantly increasing the complexity of the facilities and of the procedures.

Molecular ordering in the high-temperature nematic phase of an all-aromatic liquid crystal.

We report the structural characterization of the nematic phase of 2,6-biphenyl naphthalene (PPNPP). This lath-like all-aromatic mesogen provides a valuable benchmark for classical theories of nematic order. PPNPP exhibits a very high temperature nematic phase (417-489 °C) above an enantiotropic smectic A phase.

The cybotactic nematic phase of bent-core mesogens: state of the art and future developments.

The molecular clustering observed in the fluid nematic phase of nonlinear liquid crystal molecules underlies exaggerated field effects that portend unique technological advances in next-generation liquid crystal displays. However, the detailed nature of the molecular organization within the clusters and the temporal and spatial persistence of the organization remain unclear. Herein we review the evolution of structural studies of this unique nematic phase.

Fine tuning of lithographic masks through thin films of PS-b-PMMA with different molar mass by rapid thermal processing.

The self-assembly of asymmetric polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) block copolymer based nanoporous thin films over a broad range of molar mass (Mn) between 39 kg·mol(-1) and 205 kg·mol(-1) is obtained by means of a simple thermal treatment. In the case of standard thermal treatments, the self-assembly process of block copolymers is hindered at small Mn by thermodynamic limitations and by a large kinetic barrier at high Mn. We demonstrate that a fine tuning of the annealing parameters, performed by a Rapid Thermal Processing (RTP) machine, permits us to overcome those limitations.

Evidence of Cybotactic Order in the Nematic Phase of a Main-Chain Liquid Crystal Polymer with Bent-Core Repeat Unit.

We report the synthesis and structural characterization of a main-chain liquid crystal polymer constituted by a 1,2,4-oxadiazole-based bent-core repeat unit. For the first time, a liquid crystal polymer made of bent mesogenic units is demonstrated to exhibit cybotactic order in the nematic phase. Coupled with the chain-bond constraints, cybotaxis results in maximized molecular correlations that make this material of great potential in the search for the elusive biaxial and ferroelectric nematic phases.

Thermally induced self-assembly of cylindrical nanodomains in low molecular weight PS-b-PMMA thin films.

The phase behaviour in thin films of an asymmetric polystyrene-b-polymethylmethacrylate (PS-b-PMMA) block copolymer with a molecular weight of 39 kg mol(-1) was assessed at a wide range of temperatures and times. Cylindrical PMMA structures featuring a diameter close to 10 nm and perpendicularly oriented with respect to the substrate were obtained at 180 °C in relatively short annealing times (t ≤ 30 min) by means of a simple thermal treatment performed in a standard rapid thermal processing machine.

Extraordinary magnetic field effect in bent-core liquid crystals.

A bent-core mesogen that forms a cybotactic nematic phase exhibits a giant magnetic field-induced shift of its nematic-isotropic and smectic-C-nematic transition temperatures: ΔT(H) = 4 K for H = 10 kOe. In contrast with molecular nematics, in cybotactic nematics the field couples with the anisotropic susceptibility of clusters containing several hundred partially ordered molecules. X-ray diffraction data corroborate a quantitative estimate of inferred cluster size (∼300 molecules).

Metal cation induced cubic phase in poly(ethylene glycol)-functionalized dioleoylphosphatidylethanolamine aqueous dispersions.

Metal cations (Mn(2+) or Ca(2+)) in aqueous dispersions of mixtures of dioleoylphosphatidylethanolamine (DOPE) and poly(ethylene glycol)-functionalized DOPE (DOPE-PEG(350)) induce, above a certain amount of the PEG lipid component, a phase transition from the inverted hexagonal phase H(II) to the bicontinuous inverted cubic phase Q(224) with space group Pn3m. The process is driven by the decrease of free elastic energy due to the Gaussian curvature of the cubic phase. The structural characterization of the phase behavior over the whole explored range of DOPE-PEG/DOPE weight ratio (3-25%) is reported, focusing on the role of the metal cation in the formation of the 3D cubic lattice.

Structure and phase behavior of self-assembled DPPC-DNA-metal cation complexes.

Multilamellar liposomes of dipalmitoylphosphatidylcholine (DPPC) in solution with DNA and bivalent metal cations (Ca2+, Mn2+, Mg2+) self-assemble into a ternary DPPC-DNA-Me2+ complex. The supramolecular structure of the complex consists of an ordered multilamellar assembly where hydrated DNA helices are sandwiched between the lipid bilayers and the metal cations bind the phosphate groups of DNA to the lipid polar heads. In the range of explored incubation times, the complex coexists with the uncomplexed DPPC over the whole temperature range investigated (20-55 degrees C).

Fe2+ promoted peroxidation of 1,2-diacyl-sn-glycero-3-phosphocholine liposomes in the presence of calf thymus DNA.

The peroxidation reaction of some liposomes, namely egg yolk phosphatidylcholine (PC), dioleoyl- (DOPC) and dilinoleoyl- (DLPC) phosphocholines, promoted by ferrous ions (Fenton reaction) has been studied at the physiological pH value, in the absence and in the presence of calf thymus DNA. A catalytic effect of DNA, where the lag time reduces or is completely annihilated, together with an increase in both the yields and the rates of the reactions, has been observed. This effect of DNA has been attributed to the ability of the three components, liposomes, DNA and Fe2+, to form a stable ternary complex, which produces a reduction of the undulatory fluctuations of the hydrocarbon tails of liposomes and strengthens the packing between the acyl chains in the lipid bilayers, with the consequence of enhancing the liposome crystallinity.

Alkaline chitosan solutions.

Rigid and transparent hydrogels were obtained upon pouring chitosan salt solutions into saturated ammonium hydrogen carbonate. Incubation at 20 degrees C for 5 days yielded chitosan carbamate ammonium salt, Chit-NHCO(2)(-)NH(4)(+) a chemical species that either by hydrolysis or by thermal treatment decomposed to restore chitosan in free amine form. Chitosans of different degrees of acetylation, molecular sizes and origins (squid and crustaceans) were used as hydrochloride, acetate, glycolate, citrate and lactate salts.