A dynamically loaded model to study neocartilage and integration in human cartilage repair.

Articular cartilage injuries in the knee can lead to post-traumatic osteoarthritis if untreated, causing debilitating problems later in life. Standard surgical treatments fail to ensure long lasting repair of damaged cartilage, often resulting in fibrotic tissue. While there is a vast amount of research into cartilage regeneration, integrating engineered implants with cartilage remains a challenge.

Feasibility and barriers to rapid establishment of patient-derived primary osteosarcoma cell lines in clinical management.

Osteosarcoma is a highly aggressive primary bone tumor that has seen little improvement in survival rates in the past three decades. Preclinical studies are conducted on a small pool of commercial cell lines which may not fully reflect the genetic heterogeneity of this complex cancer, potentially hindering translatability of results. Developing a single-site laboratory protocol to rapidly establish patient-derived primary cancer cell lines (PCCL) within a clinically actionable time frame of a few weeks will have significant scientific and clinical ramifications.

Controlled oxygen delivery to power tissue regeneration.

Oxygen plays a crucial role in human embryogenesis, homeostasis, and tissue regeneration. Emerging engineered regenerative solutions call for novel oxygen delivery systems. To become a reality, these systems must consider physiological processes, oxygen release mechanisms and the target application.

Negative Printing for the Reinforcement of Tissue-Engineered Cartilage.

In the realm of cartilage engineering, the targeted delivery of both cells and hydrogel materials to the site of a defect serves to directly stimulate chondral repair. Although the application of stem cell-laden soft hydrogels to tissue defects holds great promise for cartilage regeneration, a significant challenge lies in overcoming the inherent limitation of these soft hydrogels, which must attain mechanical properties akin to the native tissue to withstand physiological loading. We therefore developed a system where a gelatin methacryloyl hydrogel laden with human adipose-derived mesenchymal stem cells is combined with a secondary structure to provide bulk mechanical reinforcement.

Bridging bench to body: ex vivo models to understand articular cartilage repair.

With little to no ability to self-regenerate, human cartilage defects of the knee remain a major clinical challenge. Tissue engineering strategies include delivering specific types of cells and biomaterials to the injured cartilage for restoration of architecture and function. Pre-clinical models to test the efficacy of the therapies come with high costs and ethical issues, and imperfect prediction of performance in humans.

Within or Without You? A Perspective Comparing In Situ and Ex Situ Tissue Engineering Strategies for Articular Cartilage Repair.

Human articular cartilage has a poor ability to self-repair, meaning small injuries often lead to osteoarthritis, a painful and debilitating condition which is a major contributor to the global burden of disease. Existing clinical strategies generally do not regenerate hyaline type cartilage, motivating research toward tissue engineering solutions. Prospective cartilage tissue engineering therapies can be placed into two broad categories: i) Ex situ strategies, where cartilage tissue constructs are engineered in the lab prior to implantation and ii) in situ strategies, where cells and/or a bioscaffold are delivered to the defect site to stimulate chondral repair directly.

Towards Clinical Translation of In Situ Cartilage Engineering Strategies: Optimizing the Critical Facets of a Cell-Laden Hydrogel Therapy.

Background: Articular cartilage repair using implantable photocrosslinkable hydrogels laden with chondrogenic cells, represents a promising in situ cartilage engineering approach for surgical treatment. The development of a surgical procedure requires a minimal viable product optimized for the clinical scenario. In our previous work we demonstrated how gelatin based photocrosslinkable hydrogels in combination with infrapatellar derived stem cells allow the production of neocartilage in vitro.

Suitability of Marine- and Porcine-Derived Collagen Type I Hydrogels for Bioprinting and Tissue Engineering Scaffolds.

Collagens from a wide array of animals have been explored for use in tissue engineering in an effort to replicate the native extracellular environment of the body. Marine-derived biomaterials offer promise over their conventional mammalian counterparts due to lower risk of disease transfer as well as being compatible with more religious and ethical groups within society. Here, collagen type I derived from a marine source (, Blue Grenadier) is compared with the more established porcine collagen type I and its potential in tissue engineering examined.

Microbial Transglutaminase Improves Adhesion of Gelatin Methacryloyl Hydrogels to Human Cartilage.

Current surgical techniques to treat articular cartilage defects fail to produce a satisfactory long-term repair of the tissue. Regenerative approaches show promise in their ability to generate hyaline cartilage using biomaterials in combination with stem cells. However, the difficulty of seamlessly integrating the newly generated cartilage with the surrounding tissue remains a likely cause of long-term failure.

Microencapsulation of growth factors by microfluidic system.

The encapsulation of growth factors is an important component of tissue engineer- ing. Using microspheres is a convenient approach in which the dose of factors can be regulated by increasing or decreasing the number of encapsulated microspheres. Moreover, microspheres offer the possibility of delivering the growth factors directly to the target site.

Photothermal release and recovery of mesenchymal stem cells from substrates functionalized with gold nanorods.

Mesenchymal stem cell therapies show great promise in regenerative medicine. However, to generate clinically relevant numbers of these stem cells, significant in vitro expansion of the cells is required before transplantation into the affected wound or defect. The current gold standard protocol for recovering in vitro cultured cells involves treatment with enzymes such as trypsin which can affect the cell phenotype and ability to interact with the environment.

Formation of alginate microspheres prepared by optimized microfluidics parameters for high encapsulation of bioactive molecules.

Drug delivery systems such as microspheres have shown potential in releasing biologicals effectively for tissue engineering applications. Microfluidic systems are especially attractive for generating microspheres as they produce microspheres of controlled-size and in low volumes, using micro-emulsion processes. However, the flow rate dependency on the encapsulation of molecules at a microscale is poorly understood.

DKC1 Overexpression Induces a More Aggressive Cellular Behavior and Increases Intrinsic Ribosomal Activity in Immortalized Mammary Gland Cells.

Dyskerin is a nucleolar protein involved in the small nucleolar RNA (snoRNA)-guided pseudouridylation of specific uridines on ribosomal RNA (rRNA), and in the stabilization of the telomerase RNA component (hTR). Loss of function mutations in DKC1 causes X-linked dyskeratosis congenita, which is characterized by a failure of proliferating tissues and increased susceptibility to cancer. However, several tumors show dyskerin overexpression.

FLASH: Fluorescently LAbelled Sensitive Hydrogel to monitor bioscaffolds degradation during neocartilage generation.

Regenerative therapies based on photocrosslinkable hydrogels and stem cells are of growing interest in the field of cartilage repair. Cell-mediated degradation is critical for the successful clinical translation of implanted hydrogels. However, characterising cell-mediated degradation, while simultaneously monitoring the deposition of a distinct new matrix, remains a major challenge.

Bioprinting Stem Cells in Hydrogel for In Situ Surgical Application: A Case for Articular Cartilage.

Three-dimensional (3D) bioprinting is driving major innovations in the area of cartilage tissue engineering. As an alternative to computer-aided 3D printing, in situ additive manufacturing has the advantage of matching the geometry of the defect to be repaired without specific preliminary image analysis, shaping the bioscaffold within the defect, and achieving the best possible contact between the bioscaffold and the host tissue. Here, we describe an in situ approach that allows 3D bioprinting of human adipose-derived stem cells (hADSCs) laden in 10%GelMa/2%HAMa (GelMa/HAMa) hydrogel.

Characterizing Bioinks for Extrusion Bioprinting: Printability and Rheology.

In recent years, new technologies based on 3D bioprinting have emerged as ideal tools with which to arrange cells and biomaterials in three dimensions and so achieve tissue engineering's original goals. The simplest and most widely used form of bioprinting is based on pneumatic extrusion, where 3D structures are built up by drawing patterns of cell-laden or non-cell-laden material through a robotically manipulated syringe. Developing and characterizing new biomaterials for 3D bioprinting (i.

Human articular cartilage repair: Sources and detection of cytotoxicity and genotoxicity in photo-crosslinkable hydrogel bioscaffolds.

Three-dimensional biofabrication using photo-crosslinkable hydrogel bioscaffolds has the potential to revolutionize the need for transplants and implants in joints, with articular cartilage being an early target tissue. However, to successfully translate these approaches to clinical practice, several barriers must be overcome. In particular, the photo-crosslinking process may impact on cell viability and DNA integrity, and consequently on chondrogenic differentiation.

Evaluation of sterilisation methods for bio-ink components: gelatin, gelatin methacryloyl, hyaluronic acid and hyaluronic acid methacryloyl.

Reliable and scalable sterilisation of hydrogels is critical to the clinical translation of many biofabrication approaches, such as extrusion-based 3D bioprinting of cell-laden bio-inks. However sterilisation methods can be destructive, and may have detrimental effects on the naturally-derived hydrogels that constitute much of the bio-ink palette. Determining effective sterilisation methods requires detailed analysis of the effects of sterilisation on relevant properties such as viscosity, printability and cytocompatibility.

Protocols for Culturing and Imaging a Human Osteochondral Model for Cartilage Biomanufacturing Applications.

Cartilage defects and diseases remain major clinical issues in orthopaedics. Biomanufacturing is now a tangible option for the delivery of bioscaffolds capable of regenerating the deficient cartilage tissue. However, several limitations of and experimental animal models pose serious challenges to the translation of preclinical findings into clinical practice.

Design, Fabrication and Validation of a Precursor Pulsed Electromagnetic Field Device for Bone Fracture Repair.

Pulsed electromagnetic field (PEMF) stimulation has been utilized in the medical field since the early 20th century. A number of therapeutic devices have been developed for the treatment of bone fractures and other medical applications. Most of these devices are backed by limited quantitative evidence.