Heat resistance of five spoilage microorganisms in a carbonated broth.

Despite their acidic pH, carbonated beverages can be contaminated by spoilage microorganisms. Thermal treatments, before and/or after carbonation, are usually applied to prevent the growth of these microorganisms. However, the impact of CO on the heat resistance of spoilage microorganisms has never been studied.

Impact of carbon dioxide on the radial growth of fungi isolated from dairy environment.

In dairy industry, filamentous fungi are used as adjunct cultures in fermented products for their technological properties but they could also be responsible for food spoilage and mycotoxin production. The consumer demands about free-preservative products has increased in recent years and lead to develop alternative methods for food preservation. Modified Atmosphere Packaging (MAP) can inhibit fungal growth and therefore increase the food product shelf-life.

Effects of carbon dioxide and oxygen on the growth rate of various food spoilage bacteria.

The growth of six bacterial species (Carnobacterium maltaromaticum, Bacillus weihenstephanensis, Bacillus cereus, Paenibacillus spp., Leuconostoc mesenteroides and Pseudomonas fragi) was studied in various gas compositions. Growth curves were obtained at various oxygen concentrations (between 0.

Synergistic interaction between pH and NaCl in the limits of germination and outgrowth of Clostridium sporogenes and Group I Clostridium botulinum vegetative cells and spores after heat treatment.

Group I Clostridium botulinum and Clostridium sporogenes are physiologically and genetically closely related. Both are widely distributed in the environment and can cause foodborne botulism. In this work, a physiological study was conducted with 37 isolates from spoiled canned food and five referenced strains of C.

The synergic interaction between environmental factors (pH and NaCl) and the physiological state (vegetative cells and spores) provides new possibilities for optimizing processes to manage risk of C. sporogenes spoilage.

Clostridium sporogenes has been widely used as a surrogate for proteolytic C. botulinum for validating thermal processes in low-acid cans. To limit the intensity of heat treatments, industrials must use other ways of control as an association of acidic and saline environment after a low heat treatment.

Viability of bacterial spores surviving heat-treatment is lost by further incubation at temperature and pH not suitable for growth.

Spores from 21 strains from different genera were heat-treated and stored in different sets of process conditions (4 temperatures and 3 pH levels) defined to prevent growth. In these conditions, spores surviving the heat treatment progressively lost viability during storage. Different inactivation curve shapes (linear, shoulder and tailing) and different sensitivities to storage were observed.

Effects of temperature, pH and water activity on the growth and the sporulation abilities of Bacillus subtilis BSB1.

Spore-forming bacteria are implicated in cases of food spoilage or food poisoning. In their sporulated form, they are resistant to physical and chemical treatments applied in the food industry and can persist throughout the food chain. The sporulation leads to an increase in the concentration of resistant forms in final products or food processing equipment.

Differentiation of Vegetative Cells into Spores: a Kinetic Model Applied to Bacillus subtilis.

Spore-forming bacteria are natural contaminants of food raw materials, and sporulation can occur in many environments from farm to fork. In order to characterize and to predict spore formation over time, we developed a model that describes both the kinetics of growth and the differentiation of vegetative cells into spores. The model is based on a classical growth model and enables description of the kinetics of sporulation with the addition of three parameters specific to sporulation.

Modelling the effect of oxygen concentration on bacterial growth rates.

Predicting the microbial safety of food products stored in modified atmosphere packaging implies taking into account the effect of oxygen reduction on microbial growth. According to their respiratory-type, the micro-organisms are not impacted similarly by the oxygen concentration. The aim of this article was to quantify and model the oxygen effect on the growth rates of 5 bacterial species: Listeria monocytogenes and Bacillus weihenstephanensis (facultative anaerobic), Pseudomonas fluorescens (strict aerobic), Clostridium perfringens and Clostridium sporogenes (strict anaerobic).

Dispersed phase volume fraction, weak acids and Tween 80 in a model emulsion: Effect on the germination and growth of Bacillus weihenstephanensis KBAB4 spores.

In foodstuffs, physico-chemical interactions and/or physical constraints between spores, inhibitors and food components may exist. Thus, the objective of this study was to investigate such interactions using a model emulsion as a microbial medium in order to improve bacterial spore control with better knowledge of the interactions in the formulation. Emulsions were prepared with hexadecane mixed with nutrient broth using sonication and were stabilized by Tween 80 and Span 80.

Modeling the Effect of Modified Atmospheres on Conidial Germination of Fungi from Dairy Foods.

Modified atmosphere packaging (MAP) is commonly applied to extend food shelf-life. Despite growth of a wide variety of fungal contaminants has been previously studied in relation to modified-atmospheres, few studies aimed at quantifying the effects of dioxygen (O) and carbon dioxide (CO) partial pressures on conidial germination in solid agar medium. In the present study, an original culture method was developed, allowing microscopic monitoring of conidial germination under modified-atmospheres in static conditions.

Modeling carbon dioxide effect in a controlled atmosphere and its interactions with temperature and pH on the growth of L. monocytogenes and P. fluorescens.

The effect of carbon dioxide, temperature, and pH on growth of Listeria monocytogenes and Pseudomonas fluorescens was studied, following a protocol to monitor microbial growth under a constant gas composition. In this way, the CO dissolution didn't modify the partial pressures in the gas phase. Growth curves were acquired at different temperatures (8, 12, 22 and 37 °C), pH (5.

Walking dead: Permeabilization of heat-treated Geobacillus stearothermophilus ATCC 12980 spores under growth-preventing conditions.

Although heat treatment is probably the oldest and the most common method used to inactivate spores in food processes, the specific mechanism of heat killing of spores is still not fully understood. The purpose of this study is to investigate the evolution of the permeabilization and the viability of heat-treated spores during storage under growth-preventing conditions. Geobacillus stearothermophilus spores were heat-treated under various conditions of temperature and pH, and then stored under conditions of temperature and pH that prevent growth.

Knowledge of the physiology of spore-forming bacteria can explain the origin of spores in the food environment.

Spore-forming bacteria are able to grow under a wide range of environmental conditions, to form biofilms and to differentiate into resistant forms: spores. This resistant form allows their dissemination in the environment; consequently, they may contaminate raw materials. Sporulation can occur all along the food chain, in raw materials, but also in food processes, leading to an increase in food contamination.

Die another day: Fate of heat-treated Geobacillus stearothermophilus ATCC 12980 spores during storage under growth-preventing conditions.

Geobacillus stearothermophilus spores are recognized as one of the most wet-heat resistant among aerobic spore-forming bacteria and are responsible for 35% of canned food spoilage after incubation at 55 °C. The purpose of this study was to investigate and model the fate of heat-treated survivor spores of G. stearothermophilus ATCC 12980 in growth-preventing environment.

Effect of pH on Thermoanaerobacterium thermosaccharolyticum DSM 571 growth, spore heat resistance and recovery.

Thermophilic spore-forming bacteria are potential contaminants in several industrial sectors involving high temperatures (40-65 °C) in the manufacturing process. Among those thermophilic spore-forming bacteria, Thermoanaerobacterium thermosaccharolyticum, called "the swelling canned food spoiler", has generated interest over the last decade in the food sector. The aim of this study was to investigate and to model pH effect on growth, heat resistance and recovery abilities after a heat-treatment of T.

Modeling the behavior of Geobacillus stearothermophilus ATCC 12980 throughout its life cycle as vegetative cells or spores using growth boundaries.

Geobacillus stearothermophilus is recognized as one of the most prevalent micro-organism responsible for flat sour in the canned food industry. To control these highly resistant spore-forming bacteria, the heat treatment intensity could be associated with detrimental conditions for germination and outgrowth. The purpose of this work was to study successively the impact of temperature and pH on the growth rate of G.

Predictive Microbiology Coupled with Gas (O /CO ) Transfer in Food/Packaging Systems: How to Develop an Efficient Decision Support Tool for Food Packaging Dimensioning.

Coupling gas transfer with predictive microbiology is essential to rationally design modified atmosphere packaging (MAP) strategies to ensure and guarantee food safety. Nowadays, these strategies are generally empirically built and over-sized since packaging material with high barrier properties is often chosen by default even if such a high level of protection is not systematically required. Protection strategies could be improved using rational sizing based on quantitative analysis and mathematical modeling of mass transfer.

Extending the gamma concept to non-thermal inactivation: a dynamic model to predict the fate of Salmonella during the dried sausages process.

The process of dried fermented sausages is recognized to be favourable to the reduction of the Salmonella population. The objective of this study was to develop a model describing the evolution of Salmonella during the fabrication process of dried sausages and to optimize the food formulation to prevent pathogen presence at the end of the process. An experimental design was set to investigate the effects of the fermentation and drying process for several formulations, taking into account the type of starter culture, the sodium chloride concentration, the dextrose and lactose concentration on the Salmonella Typhimurium strain behaviour.

Variation of cardinal growth parameters and growth limits according to phylogenetic affiliation in the Bacillus cereus Group. Consequences for risk assessment.

The growth rates of strains covering the seven major phylogenetic groups of Bacillus cereus sensu lato (as defined by Guinebretiere et al., 2008) at a range of temperature (7 °C-55 °C), pH (4.6-7.

Sporulation boundaries and spore formation kinetics of Bacillus spp. as a function of temperature, pH and a(w).

Sporulation niches in the food chain are considered as a source of hazard and are not clearly identified. Determining the sporulation environmental boundaries could contribute to identify potential sporulation niches. Spore formation was determined in a Sporulation Mineral Buffer.

Modeling heat resistance of Bacillus weihenstephanensis and Bacillus licheniformis spores as function of sporulation temperature and pH.

Although sporulation environmental factors are known to impact on Bacillus spore heat resistance, they are not integrated into predictive models used to calculate the efficiency of heating processes. This work reports the influence of temperature and pH encountered during sporulation on heat resistance of Bacillus weihenstephanensis KBAB4 and Bacillus licheniformis AD978 spores. A decrease in heat resistance (δ) was observed for spores produced either at low temperature, at high temperature or at acidic pH.

Design of challenge testing experiments to assess the variability of Listeria monocytogenes growth in foods.

The assessment of the evolution of micro-organisms naturally contaminating food must take into account the variability of biological factors, food characteristics and storage conditions. A research project involving eight French laboratories was conducted to quantify the variability of growth parameters of Listeria monocytogenes obtained by challenge testing in five food products. The residual variability corresponded to a coefficient of variation (CV) of approximately 20% for the growth rate (μ(max)) and 130% for the parameter K = μ(max) × lag.

Flexible querying of Web data to simulate bacterial growth in food.

A preliminary step in microbial risk assessment in foods is the gathering of experimental data. In the framework of the Sym'Previus project, we have designed a complete data integration system opened on the Web which allows a local database to be complemented by data extracted from the Web and annotated using a domain ontology. We focus on the Web data tables as they contain, in general, a synthesis of data published in the documents.

Validation of a stochastic modelling approach for Listeria monocytogenes growth in refrigerated foods.

A stochastic modelling approach was developed to describe the distribution of Listeria monocytogenes contamination in foods throughout their shelf life. This model was designed to include the main sources of variability leading to a scattering of natural contaminations observed in food portions: the variability of the initial contamination, the variability of the biological parameters such as cardinal values and growth parameters, the variability of individual cell behaviours, the variability of pH and water activity of food as well as portion size, and the variability of storage temperatures. Simulated distributions of contamination were compared to observed distributions obtained on 5 day-old and 11 day-old cheese curd surfaces artificially contaminated with between 10 and 80 stressed cells and stored at 14°C, to a distribution observed in cold smoked salmon artificially contaminated with approximately 13 stressed cells and stored at 8°C, and to contaminations observed in naturally contaminated batches of smoked salmon processed by 10 manufacturers and stored for 10 days a 4°C and then for 20 days at 8°C.