Unlocking Micro-Origami Energy Storage.

Transforming thin films into high-order stacks has proven effective for robust energy storage in macroscopic configurations like cylindrical, prismatic, and pouch cells. However, the lack of tools at the submillimeter scales has hindered the creation of similar high-order stacks for micro- and nanoscale energy storage devices, a critical step toward autonomous intelligent microsystems. This Spotlight on Applications article presents recent advancements in micro-origami technology, focusing on shaping nano/micrometer-thick films into three-dimensional architectures to achieve folded or rolled structures for microscale energy storage devices.

Polymer hetero-electrolyte enabled solid-state 2.4-V Zn/Li hybrid batteries.

The high redox potential of Zn leads to low voltage of Zn batteries and therefore low energy density, plaguing deployment of Zn batteries in many energy-demanding applications. Though employing high-voltage cathode like spinel LiNiMnO can increase the voltages of Zn batteries, Zn ions will be immobilized in LiNiMnO once intercalated, resulting in irreversibility. Here, we design a polymer hetero-electrolyte consisting of an anode layer with Zn ions as charge carriers and a cathode layer that blocks the Zn ion shuttle, which allows separated Zn and Li reversibility.

Modular Design of Functional Glucose Monomer and Block Co-Polymer toward Stable Zn Anodes.

Aqueous Zn batteries employing mildly acidic electrolytes have emerged as promising contenders for safe and cost-effective energy storage solutions. Nevertheless, the intrinsic reversibility of the Zn anode becomes a focal concern due to the involvement of acidic electrolyte, which triggers Zn corrosion and facilitates the deposition of insulating byproducts. Moreover, the unregulated growth of Zn over cycling amplifies the risk of internal short-circuiting, primarily induced by the formation of Zn dendrites.

Self-assembly of Co/Pt stripes with current-induced domain wall motion towards 3D racetrack devices.

Modification of the magnetic properties under the induced strain and curvature is a promising avenue to build three-dimensional magnetic devices, based on the domain wall motion. So far, most of the studies with 3D magnetic structures were performed in the helixes and nanowires, mainly with stationary domain walls. In this study, we demonstrate the impact of 3D geometry, strain and curvature on the current-induced domain wall motion and spin-orbital torque efficiency in the heterostructure, realized via a self-assembly rolling technique on a polymeric platform.

A Photolithographable Electrolyte for Deeply Rechargeable Zn Microbatteries in On-Chip Devices.

Zn batteries show promise for microscale applications due to their compatibility with air fabrication but face challenges like dendrite growth and chemical corrosion, especially at the microscale. Despite previous attempts in electrolyte engineering, achieving successful patterning of electrolyte microscale devices has remained challenging. Here, successful patterning using photolithography is enabled by incorporating caffeine into a UV-crosslinked polyacrylamide hydrogel electrolyte.

Nanomaterial-decorated micromotors for enhanced photoacoustic imaging.

Unlabelled: Micro-and nanorobots have the potential to perform non-invasive drug delivery, sensing, and surgery in living organisms, with the aid of diverse medical imaging techniques. To perform such actions, microrobots require high spatiotemporal resolution tracking with real-time closed-loop feedback. To that end,  photoacoustic imaging has appeared as a promising technique for imaging microrobots in deep tissue with higher molecular specificity and contrast.

Magnetotactic Sperm Cells for Assisted Reproduction.

Biohybrid micromotors are active microscopic agents consisting of biological and synthetic components that are being developed as novel tools for biomedical applications. By capturing motile sperm cells within engineered microstructures, they can be controlled remotely while being propelled forward by the flagellar beat. This makes them an interesting tool for reproductive medicine that can enable minimally invasive sperm cell delivery to the oocyte in vivo, as a treatment for infertility.

Fast-Response Micro-Phototransistor Based on MoS/Organic Molecule Heterojunction.

Over the past years, molybdenum disulfide (MoS) has been the most extensively studied two-dimensional (2D) semiconductormaterial. With unique electrical and optical properties, 2DMoS is considered to be a promising candidate for future nanoscale electronic and optoelectronic devices. However, charge trapping leads to a persistent photoconductance (PPC), hindering its use for optoelectronic applications.

Zn Microbatteries Explore Ways for Integrations in Intelligent Systems.

As intelligent microsystems develop, many revolutionary applications, such as the swallowing surgeon proposed by Richard Feynman, are about to evolve. Nonetheless, integrable energy storage satisfying the demand for autonomous operations has emerged as a major obstacle to the deployment of intelligent microsystems. A reason for the lagging development of integrable batteries is the challenge of miniaturization through microfabrication procedures.

Technology Roadmap for Flexible Sensors.

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited.

Single "Swiss-roll" microelectrode elucidates the critical role of iron substitution in conversion-type oxides.

Advancing the lithium-ion battery technology requires the understanding of electrochemical processes in electrode materials with high resolution, accuracy, and sensitivity. However, most techniques today are limited by their inability to separate the complex signals from slurry-coated composite electrodes. Here, we use a three-dimensional "Swiss-roll" microtubular electrode that is incorporated into a micrometer-sized lithium battery.

Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization.

Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules.

Microbatteries with twin-Swiss-rolls redefine performance limits in the sub-square millimeter range.

To maintain the downscaling of microelectronic devices with footprints less than one square millimeter, next-generation microbatteries should occupy the same area and deliver adequate energy for running a new generation of multi-functional microautonomous systems. However, the current microbattery technology fails in accomplishing this task because the micrometer-sized electrodes are not compatible with on-chip integration protocols and technologies. To tackle this critical challenge, an on-chip Swiss-roll microelectrode architecture is employed that exploits the self-assembly of thin films into ultra-compact device architectures.

Multifunctional 4D-Printed Sperm-Hybrid Microcarriers for Assisted Reproduction.

Remotely controllable microrobots are appealing for various biomedical in vivo applications. In particular, in recent years, our group has focused on developing sperm-microcarriers to assist sperm cells with motion deficiencies or low sperm count (two of the most prominent male infertility problems) to reach the oocyte toward in-vivo-assisted fertilization. Different sperm carriers, considering their motion in realistic media and confined environments, have been optimized.

Direct imaging of nanoscale field-driven domain wall oscillations in Landau structures.

Linear oscillatory motion of domain walls (DWs) in the kHz and MHz regime is crucial when realizing precise magnetic field sensors such as giant magnetoimpedance devices. Numerous magnetically active defects lead to pinning of the DWs during their motion, affecting the overall behavior. Thus, the direct monitoring of the domain wall's oscillatory behavior is an important step to comprehend the underlying micromagnetic processes and to improve the magnetoresistive performance of these devices.

Collective Coupling of 3D Confined Optical Modes in Monolithic Twin Microtube Cavities Formed by Nanomembrane Origami.

We report the monolithic fabrication of twin microtube cavities by a nanomembrane origami method for achieving collective coupling of 3D confined optical modes. Owing to the well-aligned twin geometries, two sets of 3D confined optical modes in twin microtubes are spectrally and spatially matched, by which both the fundamental and higher-order axial modes are respectively coupled with each other. Multiple groups of the coupling modes provide multiple effective channels for energy exchange between coupled microcavities illustrated by the measured spatial optical field distributions.

Ultra-dense plasmonic nanogap arrays for reorientable molecular fluorescence enhancement and spectrum reshaping.

Understanding interactions between molecular transition and intense electromagnetic fields confined by plasmon nanostructures is of great significance due to their huge potential in fundamental cavity quantum electrodynamics and practical applications. Here, we report reorientable plasmon-enhanced fluorescence leveraging the flexibilities in densely-packed gold nanogap arrays by template-assisted depositions. By finely adjusting the symmetry of the unit structure, arrays of nanogaps along two nearly-orthogonal axes can be tailored collectively with spacing down to sub-10 nm on a single chip, facilitating distinct "inter-cell" and "intra-cell" plasmon couplings.

On-chip integrated process-programmable sub-10 nm thick molecular devices switching between photomultiplication and memristive behaviour.

Molecular devices constructed by sub-10 nm thick molecular layers are promising candidates for a new generation of integratable nanoelectronic applications. Here, we report integrated molecular devices based on ultrathin copper phthalocyanine/fullerene hybrid layers with microtubular soft-contacts, which exhibit process-programmable functionality switching between photomultiplication and memristive behaviour. The local electric field at the interface between the polymer bottom electrode and the enclosed molecular channels modulates the ionic-electronic charge interaction and hence determines the transition of the device function.

An Anode-Free Zn-Graphite Battery.

The anode-free battery concept is proposed to pursue the aspiration of energy-dense, rechargeable metal batteries, but this has not been achieved with dual-ion batteries. Herein, the first anode-free Zn-graphite battery enabled by efficient Zn plating-stripping onto a silver-coated Cu substrate is demonstrated. The silver coating guides uniform Zn deposition without dendrite formation or side reaction over a wide range of electrolyte concentrations, enabling the construction of anode-free Zn cells.