Monitoring of Curing Process of Epoxy Resin by Long-Period Fiber Gratings.

The curing of epoxy resin is a complex thermo-chemical process that is difficult to monitor using existing sensing systems. We monitored the curing process of an epoxy resin by using long-period fiber gratings. The refractive index of the epoxy resin increases during the curing process and can be measured to determine the degree of curing.

High Sensitivity Cryogenic Temperature Sensors Based on Arc-Induced Long-Period Fiber Gratings.

In this paper, we investigated the evolution of the dispersion curves of long-period fiber gratings (LPFGs) from room temperature down to 0 K. We considered gratings arc-induced in the SMF28 fiber and in two B/Ge co-doped fibers. Computer simulations were performed based on previously published experimental data.

MHA Herbarium: Collections of mosses from Yana-Indigirka Region, Yakutia, Russia.

Background: The Skvortsov Herbarium of the Tsitsin Main Botanical Garden, Russian Academy of Sciences (MHA) in the 1945-1980s dealt with vascular plants and only scattered occasional collections of bryophytes and lichens were accumulated there without special arrangement. Since the late 1980s, the bryophyte studies in the MHA Herbarium became permanent and several projects were started since then, including the currently conducted "Moss Flora of Russia". There are many white spots on the map of bryophyte exploration of Russia, but one of the most conspicuous was Yakutia, the largest administrative unit of Russia, covering 3,081,000 km.

Simulation of the Transmission Spectrum of Long-Period Fiber Gratings Structures with a Propagating Acoustic Shock Front.

In this paper, we investigate modification of transmission spectra of long-period fiber grating structures with an acoustic shock front propagating along the fiber. We simulate transmission through inhomogeneous long-period fiber gratings, π-shift and reflective π-shift gratings deformed by an acoustic shock front. Coupled mode equations describing interaction of co-propagating modes in a long-period fiber grating structures with inhomogeneous deformation are used for the simulation.

Arc-Induced Long-Period Fiber Gratings at INESC TEC. Part II: Properties and Applications in Optical Communications and Sensing.

In this work, we review the most important achievements of INESC TEC related to the properties and applications of arc-induced long-period fiber gratings. The polarization dependence loss, the spectral behavior at temperatures ranging from cryogenic up to 1200 °C and under exposure to ultraviolet and gamma radiation is described. The dependence of gratings sensitivity on the fabrication parameters is discussed.

Arc-Induced Long-Period Fiber Gratings at INESC TEC. Part I: Fabrication, Characterization and Mechanisms of Formation.

In this work, we reviewed the most important achievements of INESC TEC related to the fabrication of long-period fiber gratings using the electric arc technique. We focused on the fabrication setup, the type of fiber used, and the effect of the fabrication parameters on the gratings' transmission spectra. The theory was presented, as well as a discussion on the mechanisms responsible for the formation of the gratings, supported by the measurement of the temperature reached by the fiber during an electric arc discharge.

Control of Excitation of Cladding Modes by Tapering an Insertion of Special Fiber.

A method for controlling the excitation of cladding modes by tapering special fiber insertions made of SM450 and coreless fibers is proposed. The coupling coefficients between the core mode and the cladding modes of the tapered fiber insertion are calculated. For the calculation, changes in the effective refractive indices and phases of the fiber core and in the cladding modes upon tapering are found.

Development of the sphagnoid areolation pattern in leaves of Palaeozoic protosphagnalean mosses.

Background And Aims: Protosphagnalean mosses constitute the largest group of extinct mosses of still uncertain affinity. Having the general morphology of the Bryopsida, some have leaves with an areolation pattern characteristic of modern Sphagna. This study describes the structure and variation of these patterns in protosphagnalean mosses and provides a comparison with those of modern Sphagna.

Thin-core fiber structures with overlays for sensing applications.

We investigate thin-core fiber-optic structures with film overlays that can be used for sensing applications. The structures are formed by a section of thin-core fibers (SM630 or SM450) spliced between standard SMF-28 fibers. The fibers are coated with overlays using the layer-by-layer assembly technology based on sequential alternating adsorption of polymer monolayers via electrostatic attraction.

Characterization of the response of a dual resonance of an arc-induced long-period grating to various physical parameters.

We present results on the characterization of the response of a dual resonance observed in the spectrum of a single long-period grating arc-induced in a B/Ge co-doped fiber to different physical parameters. The dual resonance is formed by two overlapping resonances corresponding to coupling of the core mode to symmetric and antisymmetric cladding modes. The behavior of the resonances is studied when the grating is subject to strain, bending, torsion, temperature, or external refractive-index changes.

Two types of resonances in long-period gratings induced by arc discharges in boron/ germanium co-doped fibers.

We demonstrate that under certain conditions it is possible to fabricate in a B/Ge co-doped fiber an arc-induced long-period grating whose spectrum contains a dual set of resonances. These two sets of resonances are formed by distinct mechanisms and are caused by coupling to cladding modes of different symmetries. They behave differently at high temperatures: the set produced by symmetric perturbation disappears during annealing at a temperature of 800 degrees C, while the other set produced by an antisymmetric mechanism can withstand temperatures above 1000 degrees C.

Demonstration of coupling to symmetric and antisymmetric cladding modes in arc-induced long-period fiber gratings.

The symmetry of cladding modes excited in microbend and arcinduced long-period fiber gratings is investigated. An optimization technique is developed to determine the fiber parameters and to associate grating resonances with cladding modes of a particular symmetry. Using this optimization procedure, we show that the gratings induced in a standard fiber by arc discharges and microbends couple light to the antisymmetric cladding modes.

Fabrication of long-period fiber gratings by twisting a standard single-mode fiber.

A new method of fabrication of long-period fiber gratings by twisting of a standard single-mode fiber at high temperature is presented. The method relies on the fact that there always exists some core-cladding eccentricity in the optical fiber. Therefore, when the fiber is twisted, its core follows a helicoidal path inside the cladding.

Propagation and coupling of hybrid modes in twisted fibers.

The first-order paraxial approximation is used to obtain the distributions of the electric and magnetic fields for the core and cladding hybrid fiber modes. The coupling coefficients of these modes are found for fibers subject to twist. The longitudinal electric field component determines the mode coupling in twisted fibers.

Wavelength shifts of cladding-mode resonance in corrugated long-period fiber gratings under torsion.

A finite deformation theory of elasticity and a theory of nonlinear photoelasticity are applied to describe the wavelength shifts of cladding-mode resonance in corrugated long-period fiber gratings under torsion. The deformation of fiber is found by use of the Murnaghan model of a solid elastic body. The quadratic photoelastic effect that is proportional to the second-order displacement gradient is investigated and compared with the classical photoelastic effect.