Nanoscale-Resistive Switching in Forming-Free Zinc Oxide Memristive Structures.

This article presents the results of experimental studies of the impact of electrode material and the effect of nanoscale film thickness on the resistive switching in forming-free nanocrystalline ZnO films grown by pulsed laser deposition. It was demonstrated that the nanocrystalline ZnO film with TiN, Pt, ZnO:In, and ZnO:Pd bottom electrodes exhibits a nonlinear bipolar effect of forming-free resistive switching. The sample with Pt showed the highest resistance values and and the highest value of = 2.

Analysis of the Piezoelectric Properties of Aligned Multi-Walled Carbon Nanotubes.

Recent studies reveal that carbon nanostructures show anomalous piezoelectric properties when the central symmetry of their structure is violated. Particular focus is given to carbon nanotubes (CNTs) with initial significant curvature of the graphene sheet surface, which leads to an asymmetric redistribution of the electron density. This paper presents the results of studies on the piezoelectric properties of aligned multi-walled CNTs.

Towards Scalable Large-Area Pulsed Laser Deposition.

One of the significant limitations of the pulsed laser deposition method in the mass-production-technologies of micro- and nanoelectronic and molecular device electronic fabrication is the issue of ensuring deposition of films with uniform thickness on substrates with large diameter (more than 100 mm) since the area of the laser spot (1-5 mm) on the surface of the ablated target is incommensurably smaller than the substrate area. This paper reports the methodology that allows to calculate the distribution profile of the film thickness over the surface substrate with a large diameter, taking into account the construction and technological parameters of the pulsed laser deposition equipment. Experimental verification of the proposed methodology showed that the discrepancy with the experiment does not exceed 8%.

Independent Control Over Size and Surface Density of Droplet Epitaxial Nanostructures Using Ultra-Low Arsenic Fluxes.

Modern and future nanoelectronic and nanophotonic applications require precise control of the size, shape and density of III-V quantum dots in order to predefine the characteristics of devices based on them. In this paper, we propose a new approach to control the size of nanostructures formed by droplet epitaxy. We reveal that it is possible to reduce the droplet volume independently of the growth temperature and deposition amount by exposing droplets to ultra-low group-V flux.

The Effect of Growth Parameters on Electrophysical and Memristive Properties of Vanadium Oxide Thin Films.

We have experimentally studied the influence of pulsed laser deposition parameters on the morphological and electrophysical parameters of vanadium oxide films. It is shown that an increase in the number of laser pulses from 10,000 to 60,000 and an oxygen pressure from 3 × 10 Torr to 3 × 10 Torr makes it possible to form vanadium oxide films with a thickness from 22.3 ± 4.

Anomalous behavior of In adatoms during droplet epitaxy on the AlGaAs surfaces.

Semiconductor quantum dots (QDs) in the InAs/AlGaAs system are of great importance due to their promising optoelectronic and nanophotonic applications. However, control over emission wavelength governed by Al content in the matrix is still limited because of an influence of surface Al content on QD size and density. In this paper, we study the growth of In nanostructures by droplet epitaxy on various AlGaAs surfaces.

Piezoelectric Energy Harvester Based on LiNbO Thin Films.

This paper reports the results of the influence of the energy of laser pulses during laser ablation on the morphology and electro-physical properties of LiNbO nanocrystalline films. It is found that increasing laser pulse energy from 180 to 220 mJ results in the concentration of charge carriers in LiNbO films decreasing from 8.6 × 10 to 1.

Synthesis and Memristor Effect of a Forming-Free ZnO Nanocrystalline Films.

We experimentally investigated the effect of post-growth annealing on the morphological, structural, and electrophysical parameters of nanocrystalline ZnO films fabricated by pulsed laser deposition. The influence of post-growth annealing modes on the electroforming voltage and the resistive switching effect in ZnO nanocrystalline films is investigated. We demonstrated that nanocrystalline zinc oxide films, fabricated at certain regimes, show the electroforming-free resistive switching.

Modeling of Catalytic Centers Formation Processes during Annealing of Multilayer Nanosized Metal Films for Carbon Nanotubes Growth.

The paper presents a theoretical model of the catalytic centers formation processes during annealing of multilayer nanosized metal films for carbon nanotubes growth. The approach to the description of the model is based on the mass transfer processes under the influence of mechanical thermoelastic stresses, which arise due to the difference in the thermal expansion coefficients of the substrate materials and nanosized metal layers. The thermal stress gradient resulting from annealing creates a drop in the chemical potential over the thickness of the film structure.

Mechanism of nucleation and critical layer formation during In/GaAs droplet epitaxy.

Fabrication of AB nanostructures by droplet epitaxy has many advantages over other epitaxial techniques. Although various characteristics of the growth by droplet epitaxy have been thoroughly studied for both lattice-matched and mismatched systems, little is known about physical processes hindering the formation of small size InAs/GaAs nanostructure arrays with low density and thin wetting layer. In this paper, we experimentally demonstrate that the indium droplet diameter can be reduced by decreasing the deposition time, but this reduction is limited by a critical thickness of droplet formation dependent on the substrate temperature.

Piezoelectric Response of Multi-Walled Carbon Nanotubes.

Recent studies in nanopiezotronics have indicated that strained graphene may exhibit abnormal flexoelectric and piezoelectric properties. Similar assumptions have been made with regard to the properties of carbon nanotubes (CNTs), however, this has not so far been confirmed. This paper presents the results of our experimental studies confirming the occurrence of a surface piezoelectric effect in multi-walled CNTs under a non-uniform strain.