Mid-infrared surface plasmon resonance fiber optic sensors.

We propose and experimentally demonstrate what we believe to be the first mid-infrared surface plasmon resonance (SPR) fiber optic sensor using a D-shaped multimode silica optical fiber coated with a 105 nm indium tin oxide (ITO) layer. The sensor shows resonance around 2700 nm, with a refractive index sensitivity of 1065.70 nm per refractive index unit (nm/RIU) for refractive indices ranging from 1.

Single-Path Supercontinuum Near- to Mid-Infrared Correlation Spectroscopy of Aqueous Samples.

Combining near-infrared (NIR) and mid-infrared (MIR) spectroscopy to cover both the fundamental and overtone combination molecular vibrational resonances allows more robust analytical methods to be used, such as two-dimensional correlation spectroscopy. However, due to the strong differences in molar absorption coefficients and transparency of the optical material, it is inherently difficult to perform NIR and MIR spectroscopy on aqueous samples using a single instrument. Combining spectra from different instruments and sample presentations can result in unwanted spectral variations, which can influence the prediction models and mitigate the advantages of the combination approaches.

Investigation of Performance Parameters of Spherical Gold Nanoparticles in Localized Surface Plasmon Resonance Biosensing.

In this paper, we present numerical and experimental results on Localized Surface Plasmon Resonance (LSPR) refractive index (RI) sensitivity, Figure of Merit (FoM), and penetration depth () dependence on spherical gold nanoparticles (AuNPs) size, and the effects of AuNP dimer interparticle distance () studied numerically. These parameters were calculated and observed for = 20, 40, 60, 80, and 100 nm diameter spherical AuNPs. Our investigation shows = 60 nm AuNPs give the best FoM.

High-power supercontinuum lasers with a flat blue spectrum through pump modulation: a numerical study.

We numerically investigate high-power, modulational instability-based supercontinuum sources. Such sources have spectra that reach the infrared material absorption edge and as a result the spectrum has a strong narrow blue peak (dispersive wave group velocity matched to solitons at the infrared loss edge) followed by a significant dip in the neighboring longer-wavelength region. In a wide range of applications one prefers a broader and more flat blue part within a certain minimum and maximum power spectral density.

Femtosecond laser line-by-line tilted Bragg grating inscription in single-mode step-index TOPAS/ZEONEX polymer optical fiber.

In this Letter, we demonstrate 8°-tilted fiber Bragg grating (TFBG) inscription in single-mode step-index TOPAS/ZEONEX polymer optical fibers (POFs) using a 520 nm femtosecond laser and the line-by-line (LbL) writing technique. As a result of the tilt angle and the fiber refractive index, a large spectral range of cladding mode resonances covering 147 nm is obtained. The evolution of the transmitted spectrum is analyzed as a function of the surrounding refractive index (SRI) in a large range from 1.

Interrogation Method with Temperature Compensation Using Ultra-Short Fiber Bragg Gratings in Silica and Polymer Optical Fibers as Edge Filters.

The use of simpler and less bulky equipment, with a reliable performance and at relative low cost is increasingly important when assembling sensing configurations for a wide variety of applications. Based on this concept, this paper proposes a simple, efficient and relative low-cost fiber Bragg grating (FBG) interrogation solution using ultra-short FBGs (USFBGs) as edge filters. USFBGs with different lengths and reflection bandwidths were produced in silica optical fiber and in (PMMA) microstructured polymer optical fiber (mPOF), and by adjusting specific inscription parameters and the diffraction pattern, these gratings can present self-apodization and unique spectral characteristics suitable for filtering operations.

Two octaves spanning photoacoustic microscopy.

In this study, for the first time, a Photoacoustic Microscopy instrument driven by a single optical source operating over a wide spectral range (475-2400 nm), covering slightly more than two octaves is demonstrated. Xenopus laevis tadpoles were imaged in vivo using the whole spectral range of 2000 nm of a supercontinuum optical source, and a novel technique of mapping absorbers is also demonstrated, based on the supposition that only one chromophore contributes to the photoacoustic signal of each individual voxel in the 3D photoacoustic image. By using a narrow spectral window (of 25 nm bandwidth) within the broad spectrum of the supercontinuum source at a time, in vivo hyper-spectral Photoacoustic images of tadpoles are obtained.

Noise in supercontinuum generated using PM and non-PM tellurite glass all-normal dispersion fibers.

Intensity fluctuations in supercontinuum generation are studied in polarization-maintaining (PM) and non-PM all-normal dispersion tellurite photonic crystal fibers. Dispersive Fourier transformation is used to resolve the shot-to-shot spectra generated using 225-fs pump pulses at 1.55 m, with experimental results well reproduced by vector and scalar numerical simulations.

Ultra-flat, low-noise, and linearly polarized fiber supercontinuum source covering 670-1390 nm: publisher's note.

This publisher's note contains a correction to Opt. Lett.46, 1820 (2021)10.

Pulse-to-pulse relative intensity noise measurements for ultrafast lasers.

Relative intensity noise (RIN) can be used to characterize pulse-to-pulse energy variations of ultrafast lasers, and is a very important performance parameter when considering the suitability of a laser for an application. However, owing to a wide range of measurement and analysis techniques, comparison of RIN values is non-trivial. Here, we clearly layout a definition of RIN as a percentage value for ultrafast laser systems.

Non-Contact Paper Thickness and Quality Monitoring Based on Mid-Infrared Optical Coherence Tomography and THz Time Domain Spectroscopy.

In industrial paper production, online monitoring of a range of quality parameters is essential for ensuring that the performance and appearance of the final product is suitable for a given application. In this article, two optical sensing techniques are investigated for non-destructive, non-contact characterization of paper thickness, surface roughness, and production defects. The first technique is optical coherence tomography based on a mid-infrared supercontinuum laser, which can cover thicknesses from ~20-90 μm and provide information about the surface finish.

Differentiation Between Benign and Malignant Pigmented Skin Tumours Using Bedside Diagnostic Imaging Technologies: A Pilot Study.

Rapid diagnosis of suspicious pigmented skin lesions is imperative; however, current bedside skin imaging technologies are either limited in penetration depth or resolution. Combining imaging methods is therefore highly relevant for skin cancer diagnostics. This pilot study evaluated the ability of optical coherence tomography, reflectance confocal microscopy, photo-acoustic imaging and high-frequency ultrasound to differentiate malignant from benign pigmented skin lesions.

High-resolution mid-infrared optical coherence tomography with kHz line rate.

We report on mid-infrared optical coherence tomography (OCT) at 4 µm based on collinear sum-frequency upconversion and promote the A-scan scan rate to 3 kHz. We demonstrate the increased imaging speed for two spectral realizations, one providing an axial resolution of 8.6 µm, and one providing a record axial resolution of 5.

Delineating papillary dermis around basal cell carcinomas by high and ultrahigh resolution optical coherence tomography-A pilot study.

Bedside diagnosis of skin cancer remains a challenging task. The real-time noninvasive technology of optical coherence tomography (OCT) masters a high diagnostic accuracy in basal cell carcinoma (BCC) but a lower specificity in recognizing imitators and other carcinomas. We investigate the delicate signal of papillary dermis using an in-house developed ultrahigh resolution OCT (UHR-OCT) system with shadow compensation and a commercial multi-focus high resolution OCT (HR-OCT) system for clinical BCC imaging.

Shot-noise limited, supercontinuum-based optical coherence tomography.

We present the first demonstration of shot-noise limited supercontinuum-based spectral domain optical coherence tomography (SD-OCT) with an axial resolution of 5.9 μm at a center wavelength of 1370 nm. Current supercontinuum-based SD-OCT systems cannot be operated in the shot-noise limited detection regime because of severe pulse-to-pulse relative intensity noise of the supercontinuum source.

Thermally tunable dispersion modulation in a chalcogenide-based hybrid optical fiber.

A hybrid optical fiber comprising metal electrodes, high performance polymers, and a highly nonlinear glass core is presented in this work as a novel, to the best of our knowledge, platform for mid-infrared nonlinear devices. The fiber allows for electrical tuning of the temperature by joule heating using a set of embedded tungsten wires. Unlike temperature tuning by an external heater, this results in a strong modulation, which introduces alternating signs of its dispersion.

Ultra-flat, low-noise, and linearly polarized fiber supercontinuum source covering 670-1390 nm.

We report an octave-spanning coherent supercontinuum (SC) fiber laser with excellent noise and polarization properties. This was achieved by pumping a highly birefringent all-normal dispersion photonic crystal fiber with a compact high-power ytterbium femtosecond laser at 1049 nm. This system generates an ultra-flat SC spectrum from 670 to 1390 nm with a power spectral density higher than 0.

Power stable 1.5-10.5 µm cascaded mid-infrared supercontinuum laser without thulium amplifier.

We demonstrate a simple and power stable 1.5-10.5 µm cascaded mid-infrared 3 MHz supercontinuum fiber laser.

Multi-wavelength high-energy gas-filled fiber Raman laser spanning from 1.53 µm to 2.4 µm.

In this work, we present a high-pulse-energy multi-wavelength Raman laser spanning from 1.53 µm up to 2.4 µm by employing the cascaded rotational stimulated Raman scattering effect in a 5 m hydrogen ()-filled nested anti-resonant fiber, pumped by a linearly polarized Er/Yb fiber laser with a peak power of ∼13 and pulse duration of ∼7 in the C-band.

Optimization of All-Polymer Optical Fiber Oxygen Sensors with Antenna Dyes and Improved Solvent Selection Using Hansen Solubility Parameters.

We present an all-polymer optical fiber sensor for the sensing of dissolved oxygen by phase-fluorometry. The sensing matrix is applied as a film on the fiber end-surface, and consists of poly-methylmethacrylate (PMMA), the oxygen quenchable luminophore platinum-octaethylporphyrin (PtOEP) and the luminophore coumarin 545T for increasing the brightness of PtOEP by way of resonance energy transfer (RET), also called light harvesting. We show that by using Hansen Solubility Parameters (HSPs), it is possible to quantitatively formulate a solvent mixture with a good solubility of the polymer matrix and the luminophores simultaneously.

Spectral broadening of ultraviolet dispersive waves in gas-filled hollow-core fiber using pump pulse modulation.

UV supercontinuum laser sources based on resonant dispersive wave (RDW) generation in gas-filled hollow-core (HC) fibers offer an attractive architecture for numerous applications. However, the narrow UV spectral peak inherent to RDW generation limits the suitability for applications that require broad spectral coverage within the UV region such as spectroscopic scatterometry. In this Letter, we demonstrate how the UV spectrum can be shaped by modulating the peak power of the pump pulses driving the RDW generation, thereby creating a broadened and flattened UV spectrum.

Polycarbonate mPOF-Based Mach-Zehnder Interferometer for Temperature and Strain Measurement.

In this paper, an endlessly single mode microstructured polymer optical fiber (mPOF) in a Mach-Zehnder (M-Z) interferometer configuration is demonstrated for temperature and strain measurement. Because there is no commercial splicer applied for POF-silica optical fiber (SOF) connectorization, prior to the M-Z interferometric sensing, we introduce an imaging projecting method to align a polycarbonate mPOF to a SOF and then the splice is cured permanently using ultraviolet (UV) glue. A He-Ne laser beam at 632.

Low-noise tunable deep-ultraviolet supercontinuum laser.

The realization of a table-top tunable deep-ultraviolet (UV) laser source with excellent noise properties would significantly benefit the scientific community, particularly within imaging and spectroscopic applications, where source noise has a crucial role. Here we provide a thorough characterization of the pulse-to-pulse relative intensity noise (RIN) of such a deep-UV source based on an argon (Ar)-filled anti-resonant hollow-core (AR HC) fiber. Suitable pump pulses are produced using a compact commercially available laser centered at 1030 nm with a pulse duration of 400 fs, followed by a nonlinear compression stage that generates pulses with 30 fs duration, 24.