Hexavalent Chromium Removal from Water and Wastewaters by Electrochemical Processes: Review.

Hexavalent chromium (Cr(VI)) is a toxic, mutagenic, teratogenic, and carcinogenic species. Its origin is in industrial activities. Therefore, its effective control is realized on a source basis.

Concentration techniques tailored for the detection of SARS-CoV-2 genetic material in domestic wastewater and treatment plant sludge: A review.

Upon the outbreak of COVID-19 pandemic, detection and quantification of SARS-CoV-2 genetic material in domestic wastewater have led to an increase in the efforts to define and implement the wastewater-based epidemiology (WBE). This application provides valuable information to define local contamination monitoring, emergence of COVID-19 and its variants and many other aspects to cope with and control the pandemic. WBE surveillance, however, requires several consecutive steps such as sampling, pretreatment and concentration of samples, and detection and quantification of SARS-CoV-2 genetic material in wastewater.

A comparative study of HO•- and SO4•--based AOPs for the degradation of non-ionic surfactant Brij30.

In the present study aqueous solutions of Brij30, an alcohol ethoxylate surfactant, were photocatalytically and photochemically treated by employing the TiO2/UV-A, H2O2/UV-C and persulfate (PS)/UV-C processes. During TiO2/UV-A treatment, even in short reaction periods (10 minutes), high rates of Brij30 removals were achieved; however, longer experiment periods (240-480 minutes) were needed in order to obtain notable total organic carbon (TOC) removals. Increasing the TiO2 dosage exhibited a positive effect on treatment efficiencies.

Sulphate control by ettringite precipitation in textile industry wastewaters.

In the present study, ettringite precipitation was theoretically and experimentally evaluated as a means of sulphate removal. The results showed that ettringite precipitation is an effective and reliable method for sulphate removal. Synthetically prepared samples which were simulated to total wastewaters originating from the textile industry (sulphate concentration of 0.

Abatements of reduced sulphur compounds, colour, and organic matter from indigo dyeing effluents by electrocoagulation.

In the present study, the treatability of indigo dyeing effluents by the electrocoagulation (EC) process using stainless steel electrodes was experimentally investigated. The samples used were concentrated with main pollutant parameters of chemical oxygen demand (COD) (1000-1100 mg/L), reduced sulphur species (over 2000 mg SO2-(3)/L), and colour (0.12-0.

Adsorption of textile reactive dyestuffs by treatment sludges of inorganic nature.

Colour removal from industrial effluents, particularly from the textile industry, has become an important requirement as the adverse effects ofdyestuffs, such as toxicity, on the environment have been proven. Adsorption is a commonly used treatment method for colour removal. Although activated carbon is very effective for this purpose, a number of natural materials and waste materials, such as waste sludges generated from treatment systems, have been tested to reduce the cost of the process.

Application of the UV-C photo-assisted peroxymonosulfate oxidation for the mineralization of dimethyl phthalate in aqueous solutions.

In this study, the degradation of dimethyl phthalate (DMP), taken as model compound for phthalate esters, by the photo-assisted peroxymonosulfate (PMS) process was investigated. The high oxidation potential of hydroxyl and sulfate radicals generated by the activation of PMS under UV-C light irradiation was used to completely oxidize aqueous DMP solutions. Experiments were conducted at varying initial pH values (3.

Treatment of phthalic acid esters by electrocoagulation with stainless steel electrodes using dimethyl phthalate as a model compound.

In this study, treatment of phthalates by electrocoagulation employing stainless steel electrodes was investigated using dimethyl phthalate (DMP) as a model compound. DMP was completely destructed within 30 min up to the high initial concentration of 100mg/L while total mineralization was also obtained within a couple of hours. The applied current density of 22.

H2O2/UV-C oxidation of potential endocrine disrupting compounds: a case study with dimethyl phthalate.

This paper discusses the feasibility of the ultraviolet radiation-hydrogen peroxide (H(2)O(2)/UV-C) process as an advanced oxidation process (AOP) in the treatment of endocrine disrupting compounds (EDC). Dimethyl phthalate (DMP) was chosen as the model compound owing to its classification as an EDC. Experiments have been conducted at various pH values (3.

Complexing agent and heavy metal removals from metal plating effluent by electrocoagulation with stainless steel electrodes.

In the present study, the treatability of a metal plating wastewater containing complexed metals originating from the nickel and zinc plating process by electrocoagulation using stainless steel electrodes was experimentally investigated. The study focused on the effect of important operation parameters on electrocoagulation process performance in terms of organic complex former, nickel and zinc removals as well as sludge production and specific energy consumption. The results indicated that increasing the applied current density from 2.

Electrocoagulation of simulated reactive dyebath effluent with aluminum and stainless steel electrodes.

Reactive dyebath effluents are ideal candidates for electrocoagulation due to their intensive color, medium strength, recalcitrant COD and high electrolyte (NaCl) content. The present study focused on the treatability of simulated reactive dyebath effluent (COD(o)=300 mg/L; color in terms of absorbance values A(o,436)=0.532 cm(-1), A(o,525)=0.

Performance of magnesium ammonium phosphate precipitation and its effect on biological treatability of leather tanning industry wastewaters.

Leather tanning industry is one of the several industries discharging significant amount of nitrogen. Magnesium ammonium phosphate (MAP) precipitation is a promising pretreatment for leather tanning industry wastewaters for the control of toxic parameters; excess suspended solids as well as nitrogen which increase the cost and complexity of following biological treatment. Application of MAP precipitation, however, modifies the characteristics and biological treatability of wastewaters.

Removal of color and COD from a mixture of four reactive azo dyes using fenton oxidation process.

This study was designed to decolorize and to reduce COD content in a mixture of four reactive dyes, i.e., Remazol Black 5 (RB5), Remazol Red RB (RR), Remazol Yellow 84 (RY), Remazol Brilliant Blue (RB) using Fenton Oxidation Process (FOP).

Pollution of coastal region impacted by acid mine drainage in Morphou bay, northern Cyprus.

Abandoned copper mines, located in Lefka-Xeros area by the Morphou bay were primarily producing copper. Secondary products, such as silver and gold were also produced for a century by cyanide leaching method. The residues of mining processes were deposited in large tailing ponds that were constructed with primitive technology.

An OUR-based approach to determine the toxic effects of 2,4-dichlorophenoxyacetic acid in activated sludge.

This study uses the oxygen uptake rate (OUR) measurement to measure toxicity effects of 2,4-dichlorophenoxyacetic acid (2,4-D) on activated sludges fed with the wastewater from a small domestic wastewater treatment plant and peptone-based synthetic wastewater. Two 2l lab-scale batch reactors were run in parallel with the same F/M ratios (0.4 mg COD per mg VSS per day) to assess the inhibition effects of 2,4-D concentrations between 25 and 75 mg l(-1) considering at least a 100% dilution rate, as compared with a pesticide industry effluent containing 20,000-40,000 mg l(-1) COD, reaches a central treatment plant.

Bauxite manufacturing residues from Gardanne (France) and Portovesme (Italy) exert different patterns of pollution and toxicity to sea urchin embryos.

This study was designed to investigate the composition and toxicity of solid residues from bauxite manufacturing plants. Soil and dust samples were collected in the proximity of two bauxite plants (Gardanne, France, and Portovesme, Italy). Samples were analyzed for their content of some selected inorganic contaminants by means of inductively coupled plasma optical emission spectroscopy (ICP-OES) either following acid digestion procedures or by seawater release of soluble components.

Toxicity of bauxite manufacturing by-products in sea urchin embryos.

By-products from a bauxite manufacturing plant located in Seydişehir, Turkey, were investigated for their composition and any toxicity to sea urchin embryogenesis. Samples from three other bauxite plants located in France, Greece, and Italy were simultaneously tested for toxicity in sea urchin embryos. Samples included sludge and solid residues in the plant and sediment and water columns from two holding ponds (red sludge or cryolite residues).