Taurine and Polyphenol Complex Repaired Epidermal Keratinocyte Wounds by Regulating IL8 and TIMP2 Expression.

The healing process after acne lesion extraction provides a miniature model to study skin wound repair mechanisms. In this study, we aimed to identify solutions for acne scars that frequently occur on our faces. We performed acne scar cytokine profiling and found that Interleukin 8 (IL8) and Tissue inhibitor of metalloproteinases 2 (TIMP2) were significant factors at the wounded site.

Topical Nanoliposomal Collagen Delivery for Targeted Fibril Formation by Electrical Stimulation.

Collagen is a complex, large protein molecule that presents a challenge in delivering it to the skin due to its size and intricate structure. However, conventional collagen delivery methods are either invasive or may affect the protein's structural integrity. This study introduces a novel approach involving the encapsulation of collagen monomers within zwitterionic nanoliposomes, termed Lip-Cols, and the controlled formation of collagen fibrils through electric fields (EF) stimulation.

Novel human skin surface antimicrobial peptide quantification method using a skin patch test chamber: A pilot study.

Introduction: Antimicrobial peptides (AMPs) on the skin surface are related to the innate immunity of the skin in preventing external infection. Skin rinsing and tape stripping (TS) are acceptable methods for analyzing AMPs on the skin surface but have limitations, such as causing skin damage. In this study, we proposed a noninvasive method to measure AMPs on the skin surface with minimal skin damage.

Effects of arginine glutamate (RE:pair) on wound healing and skin elasticity improvement after CO laser irradiation.

Background: Glutamic acid is known to be effective for keratinocyte proliferation, but its dermatological application is limited due to its poor solubility in water and various solvents.

Aim: Here, the efficacy of the arginine glutamate ion pair (named as RE:pair) for recovering damaged skin and improving skin elasticity was investigated through the analysis of keratinocyte proliferation and collagen synthesis.

Methods: Following the structural analysis of RE:pair using spectroscopic methods, a scratch assay, and Pro-Collagen I ELISA, skin tissue changes in wound-induced artificial skin, changes in wound area after laser wound induction, and the sensory evaluation of skin improvement were investigated.

A Simple Route of Printing Explosive Crystalized Micro-Patterns by Using Direct Ink Writing.

The production of energetic crystalized micro-patterns by using one-step printing has become a recent trend in energetic materials engineering. We report a direct ink writing (DIW) approach in which micro-scale energetic composites composed of 1,3,5-trinitro-1,3,5-triazinane (RDX) crystals in selected ink formulations of a cellulose acetate butyrate (CAB) matrix are produced based on a direct phase transformation from organic, solvent-based, all-liquid ink. Using the formulated RDX ink and the DIW method, we printed crystalized RDX micro-patterns of various sizes and shapes on silicon wafers.

An Accelerated Wound-Healing Surgical Suture Engineered with an Extracellular Matrix.

A suture is a ubiquitous medical device to hold wounded tissues together and support the healing process after surgery. Surgical sutures, having incomplete biocompatibility, often cause unwanted infections or serious secondary trauma to soft or fragile tissue. In this research, UV/ozone (UVO) irradiation or polystyrene sulfonate acid (PSS) dip-coating is used to achieve a fibronectin (FN)-coated absorbable suture system, in which the negatively charged moieties produced on the suture cause fibronectin to change from a soluble plasma form into a fibrous form, mimicking the actions of cellular fibronectin upon binding.

Influence of quarantine mask use on skin characteristics: One of the changes in our life caused by the COVID-19 pandemic.

Background: The influence of various environmental factors on skin properties is well known. However, there is a lack of research into the effect of quarantine masks on skin properties, even though the use of masks has significantly increased after the COVID-19 outbreak. Therefore, this study aimed to investigate the influence of mask use on skin properties.

Topical application of Zanthoxylum piperitum extract improves lateral canthal rhytides by inhibiting muscle contractions.

Facial wrinkles are the predominant phenotypes of skin aging. To date, one of the most effective ways to improve wrinkles is botulinum toxin type A (BoNT/A) injection, which inhibits muscle contractions by reducing acetylcholine release from neurons. However, since BoNT/A is a hazardous neurotoxin, the injection can only be performed by medical doctors and the procedure is only possible through invasive injection, causing inconveniences such as pain.

Performance of Glass Wool Fibers in Asphalt Concrete Mixtures.

Nowadays, in order to improve asphalt pavement performance and durability and reduce environmental pollution caused by hydrocarbon materials, many researchers are studying different ways of modifying asphalt concrete (AC) and finding alternative paving materials to extend the service life of pavements. One of the successful materials used in the modification of AC is fibers. Different types of fibers have been reinforced in AC mixtures and improvements have been observed.

Recent Advances in Microfluidic Paper-Based Analytical Devices toward High-Throughput Screening.

Microfluidic paper-based analytical devices (µPADs) have become promising tools offering various analytical applications for chemical and biological assays at the point-of-care (POC). Compared to traditional microfluidic devices, µPADs offer notable advantages; they are cost-effective, easily fabricated, disposable, and portable. Because of our better understanding and advanced engineering of µPADs, multistep assays, high detection sensitivity, and rapid result readout have become possible, and recently developed µPADs have gained extensive interest in parallel analyses to detect biomarkers of interest.

Quantitatively controllable fluid flows with ballpoint-pen-printed patterns for programmable photo-paper-based microfluidic devices.

Regulating the fluid flow in microfluidic devices enables a wide range of assay protocols for analytical applications. A programmable, photo-paper-based microfluidic device fabricated by using a method of cutting and laminating, followed by printing, is reported. The flow distance of fluid in the photo-paper-based channel was linearly proportional to time.

3D paper-based microfluidic device: a novel dual-detection platform of bisphenol A.

A novel platform of microfluidic paper-based analytical devices (μPADs) for dual detection of bisphenol A (BPA), a model analyte, was fabricated using an electronic digital plotter to create the stacked layer of μPADs and generate the lateral-flow channel without using an external pump. Two detection techniques, including electrochemical detection and laser desorption ionization mass spectrometric detection (LDI-MS), were used complementarily to improve the precision in the detection of BPA. The fluid sample was delivered to both detection zones by the capillary action, automatically generated from the fabricated microfluidic device.

Inkjet-Printed Carbon Nanotubes for Fabricating a Spoof Fingerprint on Paper.

A spoof fingerprint was fabricated on paper and applied for a spoofing attack to unlock a smartphone on which a capacitive array of sensors had been embedded with a fingerprint recognition algorithm. Using an inkjet printer with an ink made of carbon nanotubes (CNTs), we printed a spoof fingerprint having an electrical and geometric pattern of ridges and furrows comparable to that of the real fingerprint. With this printed spoof fingerprint, we were able to unlock a smartphone successfully; this was due to the good quality of the printed CNT material, which provided electrical conductivities and structural patterns similar to those of the real fingerprint.

Programmable Paper-Based Microfluidic Devices for Biomarker Detections.

Recent advanced paper-based microfluidic devices provide an alternative technology for the detection of biomarkers by using affordable and portable devices for point-of-care testing (POCT). Programmable paper-based microfluidic devices enable a wide range of biomarker detection with high sensitivity and automation for single- and multi-step assays because they provide better control for manipulating fluid samples. In this review, we examine the advances in programmable microfluidics, i.

Affordable Fabrication of Conductive Electrodes and Dielectric Films for a Paper-based Digital Microfluidic Chip.

In order to fabricate a digital microfluidic (DMF) chip, which requires a patterned array of electrodes coated with a dielectric film, we explored two simple methods: Ballpoint pen printing to generate the electrodes, and wrapping of a dielectric plastic film to coat the electrodes. For precise and programmable printing of the patterned electrodes, we used a digital plotter with a ballpoint pen filled with a silver nanoparticle (AgNP) ink. Instead of using conventional material deposition methods, such as chemical vapor deposition, printing, and spin coating, for fabricating the thin dielectric layer, we used a simple method in which we prepared a thin dielectric layer using pre-made linear, low-density polyethylene (LLDPE) plastic (17-μm thick) by simple wrapping.

Effects of Silicone Oil on Electrowetting to Actuate a Digital Microfluidic Drop on Paper.

The effects of an immiscible, lubricating polydimethylsiloxane fluid, referred to as silicone oil, on the static deformation and on the dynamic motion of a water drop on paper induced by electrowetting were investigated. The deformation of a drop on a hydrophobic film of amorphous fluoropolymers top-coated with less hydrophobic silicone oil was much more predictable, reversible and reproducible than on the uncoated surface. In the dynamic tribological experiment for a sliding drop along an inclined surface, a significant decrease in the friction coefficient, with an unexpected dependency of the contact area, was observed.

Paper-Based Bimodal Sensor for Electronic Skin Applications.

We present the development of a flexible bimodal sensor using a paper platform and inkjet printing method, which are suited for low-cost fabrication processes and realization of flexible devices. In this study, we employed a vertically stacked bimodal device architecture in which a temperature sensor is stacked on top of a pressure sensor and operated on different principles, allowing the minimization of interference effects. For the temperature sensor placed in the top layer, we used the thermoelectric effect and formed a closed-loop thermocouple composed of two different printable inks (conductive PEDOT:PSS and silver nanoparticles on a flexible paper platform) and obtained temperature-sensing capability over a wide range (150 °C).

Size-Dependent Cellular Uptake of Trans-Activator of Transcription Functionalized Nanoparticles.

We investigated the cellular uptake efficiencies of differently-sized silica nanoparticles in the presence and the absence of trans-activator of transcription (TAT) peptide. Silica nanoparticles incorporating fluorescent dye molecules with diameters of 30 to 800 nm were synthesized, and the surfaces of the silica nanoparticles were functionalized with TAT peptides or 3-aminopropyltriethoxysilane (APTES). Confocal microscopy and flow cytometry were used to determine the cellular locations and the uptake efficiencies of positively-charged silica nanoparticles (APTES- and TAT-) of various sizes from 30 to 800 nm.

Actuation of digital micro drops by electrowetting on open microfluidic chips fabricated in photolithography.

Basic manipulations of discrete liquid drops on opened microfluidic chips based on electrowetting on dielectrics were described. While most developed microfluidic chips are closed systems equipped with a top plate to cover mechanically and to contact electrically to drop samples, our chips are opened systems with a single plate without any electric contact to drops directly. The chips consist of a linear array of patterned electrodes at 1.

Active digital microfluidic paper chips with inkjet-printed patterned electrodes.

Active, paper-based, microfluidic chips driven by electrowetting are fabricated and demonstrated for reagent transport and mixing. Instead of using the passive capillary force on the pulp to actuate a flow of a liquid, a group of digital drops are transported along programmed trajectories above the electrodes printed on low-cost paper, which should allow point-of-care production and diagnostic activities in the future.

Patterning of gold nanoparticles on fluoropolymer films by using patterned surface grafting and layer-by-layer deposition techniques.

The patterning of gold nanoparticles (GNPs) on the surface of a fluoropolymer substrate by using patterned surface grafting and layer-by-layer deposition techniques is described. The surface of a poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA) substrate was selectively implanted with 150 keV proton ions. Peroxide groups were successfully formed on the implanted PFA surface, and their concentration depended on the fluence.

Analysis of thickness of a hydrophobic fluoropolymer film based on electrowetting.

The electrowetting of water drops on a dielectric fluoropolymer film was studied experimentally. The dependence of the contact angles of the water drops on the applied voltage has been well explained in the low-voltage limit by using the classical Young-Lippmann theory. With this theory, the thicknesses of films coated on glass substrates by using a spin-coater were obtained indirectly by fitting the contact angle data and were confirmed by using X-ray reflectometry.

Percutaneous vertebroplasty at C7 for the treatment of painful metastases -A case report-.

The cervical spine is a less common site for metastatic disease than is the thoracolumbar spine. Percutaneous vertebroplasty (PVP) in the cervical spine can be performed using an anteromedial or lateral approach. A 51-year-old woman with breast cancer had been experiencing severe weight-bearing neck pain for 2 months, even after undergoing radiation therapy.

Removal of a vertebral metastatic tumor compressing the spinal nerve roots via a single-port, transforaminal, endoscopic approach under monitored anesthesia care.

Spinal cord or nerve root compression from an epidural metastasis occurs in 5-10% of patients with cancer and in up to 40% of patients with preexisting nonspinal bone metastases. Most metastatic spine diseases arise from the vertebral column, with the posterior half of the vertebral body being the most common initial focus, and/or the paravertebral region, tracking along the spinal nerves to enter the spinal column via the intervertebral foramina. An 82-year-old man diagnosed with sigmoid colon cancer and liver metastases experienced intractable pain described as being like an electric shock on the right T11 dermatome.

Reversibility of electrowetting on hydrophobic surfaces and dielectrics under continuous applied DC voltage.

Various properties of electrowetting such as reversibility, reproducibility and mobility have been investigated experimentally. A conductive water drop on a thin hydrophobic film of amorphous fluropolymers coated on the counter electrode showed unexpectedly the poor reversibility under the discontinuous voltage, so called the contact angle hysteresis. The hysteresis could not been completely suppressed by inserting additionally a thick parylene-C film which has the high dielectric constant and no pinholes.