Nanoporous Dielectric Resistive Memories Using Sequential Infiltration Synthesis.

Resistance switching in metal-insulator-metal structures has been extensively studied in recent years for use as synaptic elements for neuromorphic computing and as nonvolatile memory elements. However, high switching power requirements, device variabilities, and considerable trade-offs between low operating voltages, high on/off ratios, and low leakage have limited their utility. In this work, we have addressed these issues by demonstrating the use of ultraporous dielectrics as a pathway for high-performance resistive memory devices.

Multifunctional UV and Gas Sensors Based on Vertically Nanostructured Zinc Oxide: Volume Versus Surface Effect.

This article reports that it is possible to make multifunctional sensing devices with ZnO infiltrated polymers while the sensing interactions could occur throughout the polymer. As such, we find that infiltrated devices with SU-8 polymer can result in highly sensitive UV sensors. Mesh dielectric core devices were found to make sensitive gas sensors with a better than 5 ppm sensitivity for formaldehyde and NO.

Three-dimensional optical trapping and orientation of microparticles for coherent X-ray diffraction imaging.

Optical trapping has been implemented in many areas of physics and biology as a noncontact sample manipulation technique to study the structure and dynamics of nano- and mesoscale objects. It provides a unique approach for manipulating microscopic objects without inducing undesired changes in structure. Combining optical trapping with hard X-ray microscopy techniques, such as coherent diffraction imaging and crystallography, provides a nonperturbing environment where electronic and structural dynamics of an individual particle in solution can be followed in situ.

Switchable geometric frustration in an artificial-spin-ice-superconductor heterosystem.

Geometric frustration emerges when local interaction energies in an ordered lattice structure cannot be simultaneously minimized, resulting in a large number of degenerate states. The numerous degenerate configurations may lead to practical applications in microelectronics, such as data storage, memory and logic. However, it is difficult to achieve very high degeneracy, especially in a two-dimensional system.

Realization of a Λ System with Metastable States of a Capacitively Shunted Fluxonium.

We realize a Λ system in a superconducting circuit, with metastable states exhibiting lifetimes up to 8 ms. We exponentially suppress the tunneling matrix elements involved in spontaneous energy relaxation by creating a "heavy" fluxonium, realized by adding a capacitive shunt to the original circuit design. The device allows for both cavity-assisted and direct fluorescent readouts, as well as state preparation schemes akin to optical pumping.

Photonic ring resonator filters for astronomical OH suppression.

Ring resonators provide a means of filtering specific wavelengths from a waveguide, and optionally dropping the filtered wavelengths into a second waveguide. Both of these features are potentially useful for astronomical instruments. In this paper we focus on their use as notch filters to remove the signal from atmospheric OH emission lines from astronomical spectra.

Contrast enhancement of biological nanoporous materials with zinc oxide infiltration for electron and X-ray nanoscale microscopy.

We show that using infiltration of ZnO metal oxide can be useful for high resolution imaging of biological samples in electron and X-ray microscopy. The method is compatible with standard fixation techniques that leave the sample dry, such as finishing with super critical CO drying, or simple vacuum drying up to 95 °C. We demonstrate this technique can be applied on tooth and brain tissue samples.

Directed Self-Assembly of Colloidal Particles onto Nematic Liquid Crystalline Defects Engineered by Chemically Patterned Surfaces.

In exploiting topological defects of liquid crystals as the targeting sites for trapping colloidal objects, previous work has relied on topographic features with uniform anchoring to create defects, achieving limited density and spacing of particles. We report a generalizable strategy to create topological defects on chemically patterned surfaces to assemble particles in precisely defined locations with a tunable interparticle distance at nanoscale dimensions. Informed by experimental observations and numerical simulations that indicate that liquid crystals, confined between a homeotropic-anchoring surface and a surface with lithographically defined planar-anchoring stripes in a homeotropic-anchoring background, display splay-bend deformation, we successfully create pairs of defects and subsequently trap particles with controlled spacing by designing patterns of intersecting stripes aligned at 45° with homeotropic-anchoring gaps at the intersections.

Sub-10-nm patterning via directed self-assembly of block copolymer films with a vapour-phase deposited topcoat.

Directed self-assembly (DSA) of the domain structure in block copolymer (BCP) thin films is a promising approach for sub-10-nm surface patterning. DSA requires the control of interfacial properties on both interfaces of a BCP film to induce the formation of domains that traverse the entire film with a perpendicular orientation. Here we show a methodology to control the interfacial properties of BCP films that uses a polymer topcoat deposited by initiated chemical vapour deposition (iCVD).

Quantitative Three-Dimensional Characterization of Block Copolymer Directed Self-Assembly on Combined Chemical and Topographical Prepatterned Templates.

Characterization of the three-dimensional (3D) structure in directed self-assembly (DSA) of block copolymers is crucial for understanding the complex relationships between the guiding template and the resulting polymer structure so DSA could be successfully implemented for advanced lithography applications. Here, we combined scanning transmission electron microscopy (STEM) tomography and coarse-grain simulations to probe the 3D structure of P2VP-b-PS-b-P2VP assembled on prepatterned templates using solvent vapor annealing. The templates consisted of nonpreferential background and raised guiding stripes that had PS-preferential top surfaces and P2VP-preferential sidewalls.

The Nanolithography Toolbox.

This article introduces in archival form the Nanolithography Toolbox, a platform-independent software package for scripted lithography pattern layout generation. The Center for Nanoscale Science and Technology (CNST) at the National Institute of Standards and Technology (NIST) developed the Nanolithography Toolbox to help users of the CNST NanoFab design devices with complex curves and aggressive critical dimensions. Using parameterized shapes as building blocks, the Nanolithography Toolbox allows users to rapidly design and layout nanoscale devices of arbitrary complexity through scripting and programming.

Large optical nonlinearity of ITO nanorods for sub-picosecond all-optical modulation of the full-visible spectrum.

Nonlinear optical responses of materials play a vital role for the development of active nanophotonic and plasmonic devices. Optical nonlinearity induced by intense optical excitation of mobile electrons in metallic nanostructures can provide large-amplitude, dynamic tuning of their electromagnetic response, which is potentially useful for all-optical processing of information and dynamic beam control. Here we report on the sub-picosecond optical nonlinearity of indium tin oxide nanorod arrays (ITO-NRAs) following intraband, on-plasmon-resonance optical pumping, which enables modulation of the full-visible spectrum with large absolute change of transmission, favourable spectral tunability and beam-steering capability.

Post-directed-self-assembly membrane fabrication for in situ analysis of block copolymer structures.

Full characterization of the three-dimensional structures resulting from the directed self-assembly (DSA) of block copolymers (BCP) remains a difficult challenge. Transmission electron microscope (TEM) tomography and resonant soft x-ray scattering have emerged as powerful and complementary methods for through-film characterization; both techniques require samples to be prepared on specialized membrane substrates. Here we report a generalizable process to implement BCP DSA with density multiplication on silicon nitride membranes.

Gigahertz Acoustic Vibrations of Elastically Anisotropic Indium-Tin-Oxide Nanorod Arrays.

Active control of light is important for photonic integrated circuits, optical switches, and telecommunications. Coupling light with acoustic vibrations in nanoscale optical resonators offers optical modulation capabilities with high bandwidth and small footprint. Instead of using noble metals, here we introduce indium-tin-oxide nanorod arrays (ITO-NRAs) as the operating media and demonstrate optical modulation covering the visible spectral range (from 360 to 700 nm) with ∼20 GHz bandwidth through the excitation of coherent acoustic vibrations in ITO-NRAs.

Rewritable artificial magnetic charge ice.

Artificial ices enable the study of geometrical frustration by design and through direct observation. However, it has proven difficult to achieve tailored long-range ordering of their diverse configurations, limiting both fundamental and applied research directions. We designed an artificial spin structure that produces a magnetic charge ice with tunable long-range ordering of eight different configurations.

Effect of Stereochemistry on Directed Self-Assembly of Poly(styrene--lactide) Films on Chemical Patterns.

We demonstrated here for the first time that the stereochemistry of polylactide (PLA) blocks affected the assembly behaviors of PS--PLA on chemical patterns. Two PS--PLA block copolymers, where the PLA block is either racemic (PDLLA) or left-handed (PLLA), were synthesized and directed to assemble on chemical patterns with a wide range of /. PS--PDLLA was stretched up to 70% on chemical patterns, while PS--PLLA was only stretched by 20%.

Development characteristics of polymethyl methacrylate in alcohol/water mixtures: a lithography and Raman spectroscopy study.

Poly methyl methacrylate (PMMA) is the most widely used resist in electron beam lithography. This paper reports on a lithography and Raman spectroscopy study of development characteristics of PMMA in methanol, ethanol and isopropanol mixtures with water as developers. We have found that ethanol/water mixtures at a 4:1 volume ratio are an excellent, high resolution, non-toxic developer for exposed PMMA.

The range and intensity of backscattered electrons for use in the creation of high fidelity electron beam lithography patterns.

We present a set of universal curves that predict the range and intensity of backscattered electrons which can be used in conjunction with electron beam lithography to create high fidelity nanoscale patterns. The experimental method combines direct write dose, backscattered dose, and a self-reinforcing pattern geometry to measure the dose provided by backscattered electrons to a nanoscale volume on the substrate surface at various distances from the electron source. Electron beam lithography is used to precisely control the number and position of incident electrons on the surface of the material.

Direct growth of vertically-oriented graphene for field-effect transistor biosensor.

A sensitive and selective field-effect transistor (FET) biosensor is demonstrated using vertically-oriented graphene (VG) sheets labeled with gold nanoparticle (NP)-antibody conjugates. VG sheets are directly grown on the sensor electrode using a plasma-enhanced chemical vapor deposition (PECVD) method and function as the sensing channel. The protein detection is accomplished through measuring changes in the electrical signal from the FET sensor upon the antibody-antigen binding.

Plasmonic amplifiers: engineering giant light enhancements by tuning resonances in multiscale plasmonic nanostructures.

The unique ability of plasmonic nanostructures to guide, enhance, and manipulate subwavelength light offers multiple novel applications in chemical and biological sensing, imaging, and photonic microcircuitry. Here the reproducible, giant light amplification in multiscale plasmonic structures is demonstrated. These structures combine strongly coupled components of different dimensions and topologies that resonate at the same optical frequency.

Highly sensitive room temperature carbon monoxide detection using SnO2 nanoparticle-decorated semiconducting single-walled carbon nanotubes.

We demonstrate a practical sensing platform, consisting of SnO(2) nanoparticle-decorated semiconducting single-walled carbon nanotubes assembled on gold electrodes via a dielectrophoretic process, for highly sensitive CO detection with fast response at room temperature. The highest sensitivity obtained was 0.27 and the response time was ∼2 s for 100 ppm CO detection.

Carbon-carbon contacts for robust nanoelectromechanical switches.

Nanoelectromechanical devices exhibiting dramatically improved robustness through novel material selection are demonstrated. A unique combination of carbon nanotube active elements and conductive diamond-like carbon contact electrodes results in reliable switching performance not found in devices with ubiquitously-used metal thin film electrodes. This in turn represents a viable means to improve the reliability of a diverse, and widely-pursued class of nanoscale devices ranging from single-nanostructure switches to massively parallel arrays.

Geometric control of rippling in supported polymer nanolines.

We study the swelling behavior of finlike polymer line gratings supported on a rigid substrate and show that the edge-supported polymer laminae undergo a rippling instability with a well-defined ripple wavelength λ transverse to the plane of the solid supporting substrate and a ripple amplitude that monotonically decreases from its maximum at the free-edge. These ripple patterns develop due to inhomogeneous compressive strains that arise from the geometric constraints that progressively suppress swelling near the supporting substrate where the laminae are clamped. By experimentally examining the influence of swelling strain and pattern geometry on the observed rippling instability, we find that the ripple wavelength λ scales with line width w for sufficiently long gratings, which is consistent with a simple theory.

Nanopatterning of ultrananocrystalline diamond nanowires.

We report the fabrication of horizontally aligned ultrananocrystalline diamond (UNCD) nanowires (NWs) via two different approaches. First, with the top-down approach by using electron beam lithography (EBL) and reactive ion etching (RIE) with a photo resist layer as an etch mask. Using this approach, we demonstrate fabrication of 50 µm long UNCD NWs with widths as narrow as 40 nm.