Determination of iodine in polyamide by inductively-coupled plasma/mass spectrometry.

A method was developed for the determination of iodine in polyamide (PA). This method is needed as PA containing iodine (such as CuI/KX (X = I or Br) heat stabilizing agent), may represent a risk of corrosion for electronic parts in the automotive industry. The method involved a microwave assisted digestion method using nitric acid followed by inductively coupled plasma mass spectrometry (ICP-MS) analysis.

Investigation of the stiffness and yield behaviour of melt-intercalated poly(methyl methacrylate)/organoclay nanocomposites: characterisation and modelling.

The elastic modulus and yield stress behaviour of a melt intercalated Poly(methylmethacrylate)/ organoclay (PMMA/C30B and PMMA/C20A) were studied using uniaxial tensile tests at different temperatures and different strain rate. The stress-strain response was obtained for different loading rates and different test temperature. Both the stiffness and the yield stress were then clearly identified as function of strain rate and temperature.

Micromechanically-based formulation of the cooperative model for the yield behavior of starch-based nano-biocomposites.

The tensile yield stress of plasticized starch filled with montmorillonite has been studied as a function of the temperature and the strain rate and has been compared to the yield behavior of the original matrix. Aggregated/intercalated and exfoliated nano-biocomposites, obtained from different nanofillers, have been produced and tested under uniaxial tension (tensile test). To model the nanocomposite tensile yield stress behavior, a preexisting micro-mechanically based cooperative model, which describes properly the yield of semi-crystalline polymers has been modified.

Micromechanical modeling and characterization of the effective properties in starch-based nano-biocomposites.

The aim of this work was to predict the effective elastic properties of starch-based nano-biocomposites. Experiments (materials elaboration, morphological characterization and determination of mechanical properties) were conducted on both the pristine matrix (plasticized starch) and the matrix filled with montmorillonite nanoclay. Aggregated/intercalated and exfoliated nano-biocomposites were produced and mechanically tested under uniaxial tension to understand the effect of montmorillonite morphology/dispersion on the stiffness properties of starch-based nano-biocomposites.