A novel portable anechoic chamber using ultra-thin 2D microwave absorber for industrial 5.0.

In this paper, the authors, for the first time, have shown the use of 2D conformal microwave absorbing material (MAM) in the design and fabrication of a portable Anechoic chamber (AC). The MAM is fabricated on the transparent and conductive metal oxide layer named indium-tin-oxide (ITO) with Polyethylene terephthalate as the substrate and the ground plane for zero transmission having overall thickness of 0.012 where is calculated at 0.

Home Chimney Pinwheels (HCP) as Steh and Remote Monitoring for Smart Building IoT and WSN Applications.

Smart, and ultra-low energy consuming Internet of Things (IoTs), wireless sensor networks (WSN), and autonomous devices are being deployed to smart buildings and cities, which require continuous power supply, whereas battery usage has accompanying environmental problems, coupled with additional maintenance cost. We present Home Chimney Pinwheels (HCP) as the Smart Turbine Energy Harvester (STEH) for wind; and Cloud-based remote monitoring of its output data. The HCP commonly serves as an external cap to home chimney exhaust outlets; they have very low inertia to wind; and are available on the rooftops of some buildings.

Quasioptics for increasing the beam efficiency of wireless power transfer systems.

The highest beam efficiency in a wireless power transfer (WPT) system that uses focusing components was 51%, using a [Formula: see text] diameter reflector for a transfer distance of [Formula: see text]. We have beaten that record, and present here a system that surpasses it by 25%. Using the quasioptical framework for reducing spillover losses in WPT, we present a double-reflector system that achieved a higher beam efficiency than the state-of-the-art.

Pioneering evaluation of GaN transistors in geostationary satellites.

In this paper, we present the results of a 6-year experiment in space that studied the effects of radiation in Gallium Nitride (GaN) electronics in geostationary orbit. Four GaN transistors in a Colpitts oscillator configuration were flown in the Component Technology Test-Bed aboard the Alphasat telecommunication satellite. A heuristic analysis was performed by observing the variation in the power output of the oscillators with the total ionizing dose gathered during the mission.

3D Antenna Characterization for WPT Applications.

The main goal of this paper is to present a three-dimensional (3D) antenna array to improve the performance of wireless power transmission (WPT) systems, as well as its characterization with over-the-air (OTA) multi-sine techniques. The 3D antenna consists of 15 antenna elements attached to an alternative 3D structure, allowing energy to be transmitted to all azimuth directions at different elevation angles without moving. The OTA multi-sine characterization technique was first utilized to identify issues in antenna arrays.

Challenges in Resource-Constrained IoT Devices: Energy and Communication as Critical Success Factors for Future IoT Deployment.

Internet of Things (IoT) has been developing to become a free exchange of useful information between multiple real-world devices. Already spread all over the world in the most varied forms and applications, IoT devices need to overcome a series of challenges to respond to the new requirements and demands. The main focus of this manuscript is to establish good practices for the design of IoT devices (i.

Passive Sensors for Long Duration Internet of Things Networks.

In this work, three different concepts are used to develop a fully passive sensor that is capable of measuring different types of data. The sensor was supplied by Wireless Power Transmission (WPT). Communication between the sensor and reader is established by a backscatter, and to ensure minimum energy consumption, low power techniques are used.

Wideband dynamic behavioral modeling of reflective semiconductor optical amplifiers using a tapped-delay multilayer perceptron.

In this paper, we propose a wideband dynamic behavioral model for a bulk reflective semiconductor optical amplifier (RSOA) used as a modulator in colorless radio over fiber (RoF) systems using a tapped-delay multilayer perceptron (TDMLP). 64 quadrature amplitude modulation (QAM) signals with 20 Msymbol/s were used to train, validate and test the model. Nonlinear distortion and dynamic effects induced by the RSOA modulator are demonstrated.

Digital predistortion for RSOAs as external modulators in radio over fiber systems.

Reflective semiconductor optical amplifiers (RSOAs) can be used as external modulators in radio over fiber (RoF) links due to their amplification and modulation characteristics and colorless property. The nonlinear distortion of RSOA, however, limits its dynamic range. In this paper we demonstrate digital predistortion (DPD) linearization techniques to improve the linearity of RSOA external modulators.